• Fitting Position: Rear Axle
• Net weight [kg]: 0.03
• Lisainfo: 30.19
• Additional information: 30.19

• Fitting Position: Rear Axle, Rear Axle Right, behind the axle
• paired article number: 2132101
• Manufacturer Restriction: NBK
• Piston Diameter [mm]: 30
• for brake disc thickness [mm]: 10
• Brake Disc Type: solid
• for brake disc diameter [mm]: 261
• Material: Cast Iron
• Net weight [kg]: 2.15

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston) Lisainfo: "kolb 8632008 1tk, diam 30.19 ; rem 8832005; liugur.kmpl 8932001 ." Additional information: "kolb 8632008 1tk, diam 30.19 ; rem 8832005; liugur.kmpl 8932001 ."

Lisainfo: Pidurisadul-UUS TOODE!!! (ilma deposiidita)
Installatsiooni pool: Tagasild, parem pool
kolvi läbimõõt: 30 mm
pidurisüsteem: NBK

• Fitting Position: Rear Axle, Rear Axle Left, behind the axle
• paired article number: 2132102
• Manufacturer Restriction: NBK
• Piston Diameter [mm]: 30
• for brake disc thickness [mm]: 10
• Brake Disc Type: solid
• for brake disc diameter [mm]: 261
• Material: Cast Iron
• Net weight [kg]: 2.03

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston) Lisainfo: "kolb 8632008 1tk, diam 30.19 ; rem 8832005; liugur.kmpl 8932001 ." Additional information: "kolb 8632008 1tk, diam 30.19 ; rem 8832005; liugur.kmpl 8932001 ."

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Brake System: NBK
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 30
• Quantity per axle: 2
• Manufacturer: QUICK BREAK

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-648
• Additional information: D4648 AUT 57mm
• Lisainfo: D4648 AUT 57mm

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: Nabco
• Name: FR 230008
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-163

• Fitting Position: Rear Axle
• Brake System: NBK
• for brake disc thickness [mm]: 10
• Brake Caliper Type: Brake Caliper (1 piston)
• Diameter [mm]: 30
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Manufacturer: QUICK BRAKE
• Name: QB 114-5340

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Full Set:
• for OE number: 3034573
• Brake System: SHIN TEC
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-1095C
• Additional information: D41095C
• Lisainfo: D41095C

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Full Set:
• for OE number: 4783087101000
• Brake System: NBK
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-1120C

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: Nabco
• Version: Kit+Piston
• Full Set:
• Name: FR 230902
• Manufacturer: FRENKIT

• Fitting Position: Front Axle
• pidurikettajämedusele (mm): 24
• pidurikettaläbimõõdule (mm): 258
• Aukudevaheline kaugus [mm]: 159
• Kinnitusaukude vahe 2 (mm): 159
• Kaal (g): 1,31
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Manufacturer: AUTO-GH
• Name: GH 443212

Installatsiooni pool: esisild mõlemapoolselt, paremal, vasakul, esisild paremal, esisild vasakul

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: Nabco
• Version: Kit+Piston
• Full Set:
• Name: FR 230935
• Manufacturer: FRENKIT

• Installatsiooni pool: esisild vasakul, Esisild
• Kolvi läbimõõt [mm]: 57
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZP-MZ-001
• paaris tootenumbrid: HZP-MZ-000
• Veljesuurus (toll): 14,0

• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 57
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZP-MZ-000
• paaris tootenumbrid: HZP-MZ-001
• Manufacturer: NTY

• Piston Diameter [mm]: 30
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 10
• Brake System: NBK
• Fitting Position: Rear Axle Left
• paired article number: 131-04-820
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Piston Diameter [mm]: 30
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 10
• Brake System: NBK
• Fitting Position: Rear Axle Right
• paired article number: 131-04-819
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Tagasild paremal, Tagasild
• Pidurisadulateostus: Pidurisadul koos integr. seisupiduriga
• Kolvi läbimõõt [mm]: 30
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-MZ-007
• paaris tootenumbrid: HZT-MZ-006

• Installatsiooni pool: Esisild, esisild vasakul
• paaris tootenumbrid: GH-433212H
• soovitava lisavarustuse artiklinumber: GH-443212
• Kolvi läbimõõt [mm]: 57
• Materjal: Malm
• Pidurisüsteem: AKEBONO
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Vana detaili tagastus mittevajalik:
• Manufacturer: AUTO-GH

• Version: Superkit, Kit+Piston+GuidePins
• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: Nabco
• Full Set:
• Manufacturer: FRENKIT

• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: NBK
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 124
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 34SKV753
• Kaal (kg): 2,21
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 34SKV754
• Manufacturer: ESEN SKV

• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: NBK
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 124
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 34SKV754
• Kaal (kg): 2,21
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV ESEN ZACISKI

• Fitting Position: Front Axle Right
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Brake Caliper (1 piston)
• Material: Cast Iron
• Piston Diameter [mm]: 57
• paired article number: BHX188E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW ZACISKI

SVHC: No information available, please contact the manufacturer!