• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 80
• Fabrication Number: KLP-MS-039
• Manufacturer: NTY

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with integrated ABS sensor
• Fabrication Number: KLP-CH-033
• Manufacturer: NTY

• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Name: O½YSKO KOA CITROEN P. C-CROSSER/C4 AIRCROSS
• Manufacturer: MAX

Supplementary Article/Info 2: with integrated magnetic sensor ring, with ABS sensor ring

• Fitting Position: Front Axle
• for model code: GA3W
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Number of Teeth, ABS ring: 86
• Width 1 [mm]: 40
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Inner Diameter 1 [mm]: 43
• Manufacturer: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Width [mm]: 40
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 40
• Outer Diameter [mm]: 80
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Width [mm]: 40
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 80
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 2.02
• Bolt Hole Circle Ø 1 [mm]: 114
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV449
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Equipment Line/Variant: >1114 # >1114 # >
• for OE number: 3885A040
• Inner Diameter [mm]: 43
• Width 1 [mm]: 40
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1149
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Manufacturer: OPTIMAL

Supplementary Article/Info 2: with integrated ABS sensor, with integrated magnetic sensor ring

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Height [mm]: 40
• Braking/Driving Dynamics: for vehicles with ABS
• Bearing Type: Ball Bearing
• Name: Rattalaagrikomplekt
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Required quantity: 2
• for model code: GA3W
• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: KAVO PARTS

• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.94
• Supplementary Article/Supplementary Info: with Split Pin
• Observe service information:
• Name: Rattalaagrikomplekt
• Manufacturer: FEB

Supplementary Article/Info 2: with integrated magnetic sensor ring, with retaining ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• for model code: GA3W
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Required quantity: 2
• for model code: GA3W
• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Width [mm]: 40
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.94
• Supplementary Article/Supplementary Info: with Split Pin
• Observe service information:
• Name: SW 33 10 7788
• Manufacturer: SWAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, with retaining ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laius (mm): 40
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 80
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,94
• Piirangutega toode/piirangu info: splindiga
• Hooldusinfot jälgida:
• Name: Rattalaagrikomplekt
• Manufacturer: BLP

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos turvarõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: CVT automatic transmission (stepless)
• Production date to: 201302
• Fitting Position: Front Axle both sides
• Number of Teeth, ABS ring: 86
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: FEBEST

• Construction Year from: 05.2010
• Construction Year to: 06.2013
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 43
• Width [mm]: 40
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Info 2: with rubber mount
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN R173.27

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Width [mm]: 40
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 80
• Width [mm]: 40
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: JPA

• Fitting Position: Front Axle
• Required quantity: 2
• for model code: GA3W
• Weight [kg]: 0.735
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 43
• Width [mm]: 40
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-MS-058
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• for model code: GA3W
• Flange Diameter [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 140
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Construction Year from: 05.2010
• Construction Year to: 06.2012
• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Outer Diameter [mm]: 140
• Inner Diameter [mm]: 25
• Number of mounting bores: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 141-01-199

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-MS-061
• Manufacturer: NTY
• Name: NTY KLT-MS-061

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 3785A008
• Outer Diameter [mm]: 140.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 05105719AA
• Outer Diameter [mm]: 140.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP

• Construction Year from: 12.2014
• Fitting Position: Rear Axle Right, Rear Axle Left
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 96
• for OE number: 3785A033
• Outer Diameter [mm]: 140.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP
• Additional information: GSP9400526
• Lisainfo: GSP9400526

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 141
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.27
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV408

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 141
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.86
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Equipment Line/Variant: REAR LR+RE
• for OE number: 3785A008
• Width 1 [mm]: 75.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1285
• Manufacturer: DAYCO

• Construction Year to: 06.2011
• Fitting Position: Rear Axle
• Width [mm]: 68
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 74
• Manufacturer: JPN

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 05105770AF
• Outer Diameter [mm]: 140.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 25
• Manufacturer: GSP

• Construction Year from: 02.2013
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 140.5
• Manufacturer: JPN

• Construction Year to: 06.2011
• Fitting Position: Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 3.2
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV154
• Manufacturer: ESEN SKV

• Width [mm]: 59
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 74
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle
• Weight [kg]: 3.78
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Country Specific Design: Russia
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Outer Diameter [mm]: 140.5
• Bolt Hole Circle Ø [mm]: 114.3
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Name: Rattarumm
• Manufacturer: MEY

Supplementary Article/Info 2: with ABS sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Width [mm]: 59
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 74
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle
• Weight [kg]: 3.78
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: BLP

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year to: 02.2013
• Rim Hole Number: 5
• Outer Diameter [mm]: 140.5
• Supplementary Article/Info 2: with cover, with integrated ABS sensor
• Number of mounting bores: 4
• Manufacturer: OPTIMAL

• Engine Code: 4B10
• Construction Year to: 06.2011, 09.2011
• Block Separation:
• Width [mm]: 68
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 74
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle
• Weight [kg]: 3.35
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• for model code: GA3W
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Construction Year from: 07.2012
• Manufacturer: DRIVE

• Engine Code: 4B10
• Construction Year to: 06.2011, 09.2011
• Block Separation:
• Width [mm]: 68
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 74
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle
• Weight [kg]: 3.35
• Manufacturer: BLUE PRINT ZAWIESZENIE

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• No. of holes 1: 4
• No. of holes 2: 5
• Supplementary Article/Info 2: with rubber mount
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR

• Engine Code: 4B10
• Construction Year to: 06.2011, 09.2011
• Block Separation:
• Laius (mm): 68
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 74
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild
• Kaal (kg): 3,35
• Name: SW 33 10 2864
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• No. of holes 1: 4
• No. of holes 2: 5
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R173.59

• Fitting Position: Rear Axle
• Required quantity: 2
• for model code: GA3W
• Flange Diameter [mm]: 140
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Rim Size [inch]: 16.0
• Width [mm]: 55
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 78
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.26
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year from: 02.2013
• Width [mm]: 127.8
• Outer Diameter [mm]: 140.5
• Width 1 [mm]: 60.5
• Outer Diameter 1 [mm]: 78
• Manufacturer: OPTIMAL
• Additional information: 962770 OPT
• Lisainfo: 962770 OPT

• Rim Size [inch]: 16.0
• Width [mm]: 55
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 78
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.26
• Name: SW 33 10 0629
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Equipment Line/Variant: >1114 # 1214>
• for OE number: 3785A063
• Width 1 [mm]: 60.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 4
• Name: DA KWD1283
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Construction Year to: 06.2012
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 140.4
• Outer Diameter 2 [mm]: 80.2
• Outer Diameter 1 [mm]: 73.8
• Width 2 [mm]: 60.9
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Construction Year from: 07.2012
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 140.5
• Outer Diameter 2 [mm]: 70.6
• Outer Diameter 1 [mm]: 77.8
• Width 2 [mm]: 60.5
• SVHC: No SVHC present!
• Manufacturer: FAG