• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Thread Size: 3/8x19 BSP
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

Manufacturer: MAGNETI MARELLI

• paired article number: 172428
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 884
• Weight [kg]: 0.098
• Manufacturer: FEBI
• Additional information: 109544755
• Lisainfo: 109544755

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Colour: black
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-NS-003
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: 3/8"-19BSP
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: MD182467
• Manufacturer: MEAT&DORIA

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: PT3/8
• Name: NI 207007
• Manufacturer: NISSENS

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Construction Year to: 06.2012
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 975
• Sensor Type: Active sensor
• Fitting Depth [mm]: 16
• Fabrication Number: HCA-MS-022
• paired article number: HCA-MS-021
• Manufacturer: NTY

• Construction Year to: 06.2012
• Fitting Position: Rear Axle Left
• Braking/Driving Dynamics: for vehicles with ABS
• Cable Length [mm]: 1,000
• Fabrication Number: HCA-MS-021
• paired article number: HCA-MS-022
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: Front Axle Right
• Length [mm]: 936
• Braking/Driving Dynamics: for vehicles with ABS
• Fabrication Number: HCA-MS-020
• paired article number: HCA-MS-019
• Manufacturer: NTY

• Thread Size: 3/8x19 BSP
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-MS-019
• paired article number: HCA-MS-020
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Construction Year from: 12.2016
• Quantity: 1
• Vehicle Equipment Line/Variant: H-LINE/INFORM
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 890
• Name: DE SS21527-12B1
• Manufacturer: DELPHI

• Construction Year to: 06.2012
• Fitting Position: Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,030
• Socket colour: black

• Fitting Position: Front Axle Right
• Construction Year from: 12.2016
• Quantity: 1
• Vehicle Equipment Line/Variant: H-LINE/INFORM
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 890
• Name: DE SS21528-12B1
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left
• Construction Year to: 06.2012
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,006
• Name: DE SS21533-12B1
• Manufacturer: DELPHI

• Engine Code: 4A92
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Colour: grey
• Fitting Position: outer, Rear, both sides
• Fabrication Number: EPDC-MS-000
• Manufacturer: NTY

• Engine Code: 4A92
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Sensor Type: Active sensor
• Fitting Position: Front Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Length [mm]: 1,005
• Cable Length [mm]: 960
• Number of pins: 2
• Guarantee: 3 years guarantee
• paired article number: 06SKV489
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: black
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV490
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Left
• Length [mm]: 1,005
• Cable Length [mm]: 960
• Number of pins: 2
• Guarantee: 3 years guarantee
• paired article number: 06SKV490
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: black
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV489

• for OE number: 4670A582
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• for OE number: 4670A581
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Number of pins: 3
• Fabrication Number: ECP-MS-000
• Manufacturer: NTY

• Fitting Position: Right Front
• Cable Length [mm]: 960
• Manufacturer: ASHIKA

• Fitting Position: Right Rear
• Manufacturer: ASHIKA

• Fitting Position: Left Front
• Cable Length [mm]: 940
• Manufacturer: ASHIKA

• for OE number: 4670A579
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Fabrication Number: ECM-FR-009
• Manufacturer: NTY

• paired article number: 20-0453
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• paired article number: 20-0452
• Fitting Position: Front Axle Right
• Cable Length [mm]: 884
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: inner, Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Surface: primed
• Number of connectors: 2
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Right Rear
• Manufacturer: JAPKO

• Fitting Position: Right Front
• Cable Length [mm]: 960
• Manufacturer: JAPKO

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: +80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107121
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 06.2010
• Length [mm]: 920
• Sensor Type: Active sensor
• MAPP code available:
• Fitting Position: Front Axle Left
• Manufacturer: KAMOKA

• for OE number: 4670A580
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 891
• Manufacturer: DLP

Name: CZUJNIK ABS MITSUBISHI P. ASX, OUTLANDER, PAJERO 06- PR

• Construction Year to: 06.2012
• Installatsiooni pool: Tagasild
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,13
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV407

• Installatsiooni pool: Tagasild
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,13
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV408

• Fitting Position: Front
• Number of pins: 2
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left Rear
• Manufacturer: ASHIKA

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV066
• Manufacturer: ESEN SKV

• Fitting Position: Right Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Left, Right
• Colour: black
• Name: MM SDP058
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle Left
• Length [mm]: 1,000
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Left Rear
• Manufacturer: JAPKO

• Fitting Position: Left, Right
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 970
• Braking/Driving Dynamics: for vehicles with ABS
• paired article number: 623 025
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Construction Year from: 06.2010
• Length [mm]: 920
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 960
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 940
• Socket colour: black

• Fitting Position: Front Axle Right
• Length [mm]: 960
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Front Axle Right
• Construction Year from: 06.2010
• Length [mm]: 936
• Manufacturer: DENCKERMANN FILTRY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Left Front
• Cable Length [mm]: 940
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable, with rubber grommet
• Length [mm]: 945
• Braking/Driving Dynamics: for vehicles with ABS
• paired article number: 623 024
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Construction Year from: 06.2010
• Fitting Position: Front Axle Left
• Length [mm]: 920
• Number of connectors: 2
• Manufacturer: JPN

• Number of pins: 3
• Length [mm]: 55
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Cable Length [mm]: 1,006
• Sensor Type: Active sensor
• Fitting Depth [mm]: 16.2
• Number of connectors: 2
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Right Front
• Cable Length [mm]: 960
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

Manufacturer: NRF

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-CT-005
• Manufacturer: NTY

• paired article number: 172162
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 1,000
• Weight [kg]: 0.102
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 175420
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 973
• Weight [kg]: 0.102
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Production date from: 201006
• Production date to: 201206
• Fitting Position: Rear Axle Left
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Production date from: 201006
• Production date to: 201611
• Fitting Position: Front Axle Right
• Manufacturer: FEBEST

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 26.7
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Required quantity: 1
• Construction Year to: 06.2012
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• paired article number: ADBP710090
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 973
• Weight [kg]: 0.102
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Production date from: 201006
• Production date to: 201206
• Fitting Position: Rear Axle Right
• Manufacturer: FEBEST

• Required quantity: 1
• Construction Year to: 06.2012
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• paired article number: 109544
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Weight [kg]: 0.097
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Cable Length [mm]: 890
• Sensor Type: Active sensor
• Fitting Position: Front Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0109

• Number of pins: 2
• Sensor Type: Active sensor
• Cable Length [mm]: 869
• Fitting Position: Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0108

• Fitting Position: Rear Axle Right
• Required quantity: 1
• Construction Year to: 06.2012
• Overall Length [mm]: 1,050
• Length [mm]: 16
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 960
• paired article number: 31053
• Weight [kg]: 0.18
• Manufacturer: ABS

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of connectors: 4
• Weight [kg]: 0.026
• Name: Andur,ohuvotu rohk
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: DELPHI

• paired article number: ADC47129
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Weight [kg]: 0.097
• Observe service information:
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ESL-MS-001
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Number of pins: 4
• Pressure from [kPA]: 16
• Manufacturer: DELPHI