• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Length [mm]: 59
• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• Thread Size: 3/8x19 BSP
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM
• Additional information: NRF30249
• Lisainfo: NRF30249

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

• paired article number: 172428
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 884
• Weight [kg]: 0.098
• Manufacturer: FEBI
• Additional information: 109544755
• Lisainfo: 109544755

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Length [mm]: 936
• Braking/Driving Dynamics: for vehicles with ABS
• Fabrication Number: HCA-MS-020
• paired article number: HCA-MS-019
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-MS-019
• paired article number: HCA-MS-020
• Manufacturer: NTY

• Engine Code: 6B31
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 6B31
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Fitting Position: Front Axle Left
• Length [mm]: 1,005
• Cable Length [mm]: 960
• Number of pins: 2
• Guarantee: 3 years guarantee
• paired article number: 06SKV490
• Voltage [V]: 12
• Weight [kg]: 0.12
• Colour: black
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV489
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 952
• Braking/Driving Dynamics: for vehicles with ABS
• Fabrication Number: HCA-MS-050
• paired article number: HCA-MS-049
• Manufacturer: NTY

• paired article number: 20-0453
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• paired article number: 20-0452
• Fitting Position: Front Axle Right
• Cable Length [mm]: 884
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Colour: grey
• Fitting Position: outer, Rear, both sides
• Fabrication Number: EPDC-MS-000
• Manufacturer: NTY

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA
• Quantity per packing unit: 2

• Fabrication Number: ECM-CH-013
• Manufacturer: NTY

• Fitting Position: Front
• Number of pins: 2
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 952
• Socket colour: black

• Fitting Position: Rear Axle Left
• Sensor Type: Active sensor
• Length [mm]: 984
• Socket colour: black

• Fitting Position: Rear
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV072

• Fitting Position: Rear
• Voltage [V]: 12
• Sensor Type: Ultrasonic Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV067

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV066

• Fitting Position: Left, Right
• Colour: black
• Name: MM SDP058
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Length [mm]: 920
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 940
• Socket colour: black

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 960
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle Right
• Length [mm]: 936
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 970
• Braking/Driving Dynamics: for vehicles with ABS
• paired article number: 623 025
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.024
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 990
• Length [mm]: 42
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 890
• paired article number: 31120
• Weight [kg]: 0.17
• Manufacturer: A.B.S.

• Construction Year from: 06.2007
• paired article number: 172099
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 975
• Weight [kg]: 0.106
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• paired article number: 109544
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Weight [kg]: 0.097
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• for model code: CW6W
• Fitting Position: Front Axle Right
• Weight [kg]: 0.12
• Packaging length [cm]: 10
• Packaging width [cm]: 8.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Number of pins: 2
• Sensor Type: Active sensor
• Cable Length [mm]: 869
• Fitting Position: Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0108

• Number of pins: 2
• Cable Length [mm]: 890
• Sensor Type: Active sensor
• Fitting Position: Front Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0109

• Construction Year from: 06.2007
• paired article number: ADBP710035
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 1,010
• Weight [kg]: 0.109
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 970
• Length [mm]: 42
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 870
• paired article number: 31121
• Weight [kg]: 0.17
• Manufacturer: A.B.S.

• Construction Year from: 06.2007
• paired article number: ADBP710029
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 975
• Weight [kg]: 0.106
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI
• Lisainfo: 50880 BREMI
• Additional information: 50880 BREMI

• Transmission Type: Automatic Transmission
• Production date from: 200709
• for model code: CW6W
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.125
• Packaging length [cm]: 10
• Packaging width [cm]: 8
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• paired article number: ADC47129
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 885
• Weight [kg]: 0.097
• Observe service information:
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-MS-010
• Manufacturer: NTY

• Oxygen Sensor: Switching-type Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Construction Year from: 06.2007
• paired article number: 172157
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 1,010
• Weight [kg]: 0.109
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2007
• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Overall Length [mm]: 495
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-MS-016
• Manufacturer: NTY

Lisainfo: ENG. 3.0 MITSUBISHI OUTLANDER II 06-12, OUTLANDER III 12-, PAJERO IV -07-/ REGULACYJNA PRZED KATALIZATOREM, Dœ.CAœK. 495MM Additional information: ENG. 3.0 MITSUBISHI OUTLANDER II 06-12, OUTLANDER III 12-, PAJERO IV -07-/ REGULACYJNA PRZED KATALIZATOREM, Dœ.CAœK. 495MM

• Fitting Position: Front Axle Left
• Required quantity: 1
• Cable Length [mm]: 824
• Fitting Depth [mm]: 41.8
• Number of pins: 2
• paired article number: 8180 42326
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 941
• Fitting Depth [mm]: 41.8
• Number of pins: 2
• paired article number: 8180 42325
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Number of pins: 3
• for OE number: 1865A139
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle Right
• Required quantity: 1
• Cable Length [mm]: 960
• Fitting Depth [mm]: 46.5
• Number of pins: 2
• paired article number: 8180 42521
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Required quantity: 2
• Fitting Position: both sides, inner, Rear
• Number of pins: 2
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270681
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Fitting Position: both sides, outer, Rear, Front
• Number of pins: 2
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270511
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• paired article number: ADBP710042
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 884
• Weight [kg]: 0.098
• Observe service information:
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Left, Right, Rear
• Required quantity: 2
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 920
• Name: DE SS20437
• Manufacturer: DELPHI

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Fabrication Number: EPP-MS-003
• Manufacturer: NTY
• Name: NTY EPP-MS-003

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Cable Length [mm]: 992
• Fitting Depth [mm]: 46.5
• Number of pins: 2
• paired article number: 8180 42522
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year from: 09.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Rear, Front
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Construction Year from: 09.2007
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: Front
• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.089
• Name: SW 33 10 3158
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year from: 09.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Rear, Front
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 6B31
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Output Voltage, from [V]: 0.395
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.383
• Manufacturer: EPS

• Engine Code: 6B31
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year from: 09.2007
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Rear, Front
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Cable Length [mm]: 410
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 6B31
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: Left
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 561
• Manufacturer: DELPHI

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 470
• for OE number: MD369610
• Manufacturer: MEAT&DORIA