• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fitting Position: Left
• Thread Size: M18x1.5
• Cable Length [mm]: 757
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: MD186992
• Quality: OE
• Weight [g]: 113
• Gross Weight [g]: 143
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
3000 GT (Z16A), 06.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
3000 GT (Z16A), 06.9
(kvaliteediklass: Q)"

• Fitting Position: Right
• Thread Size: M18x1.5
• Cable Length [mm]: 740
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1588A147
• Quality: OE
• Weight [g]: 111
• Gross Weight [g]: 141
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PAJERO II (V3/W, V2/
(kvaliteediklass: Q)"

• Length [mm]: 59
• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• Engine Code: 6B31
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.187
• Manufacturer: EPS

• Engine Code: 6B31
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Thread Size: 3/8x19 BSP
• Manufacturer: VERNET

• Engine Code: 6B31
• Fitting Position: Oil Filter Housing
• Pressure [bar]: 1
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.188
• Manufacturer: EPS

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

• Thread Size: 1/8''x28h BSP
• Housing Colour: grey
• Pressure [bar]: 1
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Manufacturer: NRF

• Pressure [bar]: 0.4
• Housing Colour: grey
• Thread Size: R 1/8-28
• Spanner Size: 0
• Number of pins: 1
• Name: DE SW90044
• Manufacturer: DELPHI

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 6B31
• Fitting Position: Oil Filter Housing
• Pressure [bar]: 1
• Thread Size: 1/8 GAS
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 6B31
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: EP 1.830.230
• Manufacturer: EPS

• Engine Code: 6B31
• Housing Colour: black
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Weight [kg]: 0.024
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Switching-type Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-MS-010
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Overall Length [mm]: 495
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-MS-016
• Manufacturer: NTY

Lisainfo: ENG. 3.0 MITSUBISHI OUTLANDER II 06-12, OUTLANDER III 12-, PAJERO IV -07-/ REGULACYJNA PRZED KATALIZATOREM, Dœ.CAœK. 495MM Additional information: ENG. 3.0 MITSUBISHI OUTLANDER II 06-12, OUTLANDER III 12-, PAJERO IV -07-/ REGULACYJNA PRZED KATALIZATOREM, Dœ.CAœK. 495MM

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Fitting Position: Front, after catalytic converter
• for OE number: 1588A147
• Length [mm]: 750
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Oxygen Sensor: Unheated, Finger-type Sensor
• Manufacturer: KAVO PARTS

• Housing Type: without housing
• Fabrication Number: EPP-MS-003
• Manufacturer: NTY
• Name: NTY EPP-MS-003

• Construction Year to: 09.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Oxygen Sensor: Regulating Sensor
• Number of pins: 4
• Cable Length [mm]: 630
• for OE number: 1588A011
• Manufacturer: MEAT&DORIA

• Engine Code: 6B31
• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Fitting Position: Front
• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.089
• Name: SW 33 10 3158
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0113
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Construction Year to: 09.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

• Engine Code: 6B31
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year from: 10.2007
• Construction Year to: 09.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

• Engine Code: 6B31
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Fitting Position: Left Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Cable Length [mm]: 410
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358103171

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Left
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 561
• Manufacturer: DELPHI

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10203-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 470
• for OE number: MD369610
• Manufacturer: MEAT&DORIA

• Construction Year to: 09.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 495
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 6B31
• Fitting Position: Right Front, after catalytic converter
• Cable Length [mm]: 720
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.608
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year from: 10.2007
• Construction Year to: 09.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH