• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Number of Holes: 5
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Height [mm]: 60
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Construction Year from: 11.2003
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 60
• Outer Diameter [mm]: 262
• Centering Diameter [mm]: 90
• Brake Disc Thickness [mm]: 10
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 69
• Height [mm]: 46
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Number of bores: 5
• Brake Disc Type: Vented
• Surface: Painted
• Tightening Torque [Nm]: 100
• Manufacturer: ASHIKA
• Lisainfo: 60-05-526C
• Additional information: 60-05-526C

• Fitting Position: Rear Axle
• Construction Year from: 01.2004
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0241/1591
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.4
• Centering Diameter [mm]: 90
• Height [mm]: 60
• Name: DE BG4037
• Manufacturer: DELPHI

• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 9.5
• Number of Holes: 5
• Height [mm]: 60.3
• Centering Diameter [mm]: 90
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 90
• Height [mm]: 60.5
• Outer Diameter [mm]: 261.7
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 9
• Number of bores: 5
• Brake Disc Type: solid
• Surface: Painted
• Tightening Torque [Nm]: 100
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 89.8
• Height [mm]: 60.5
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 9.5
• Minimum thickness [mm]: 8.4
• Number of bores: 5
• Brake Disc Type: solid
• Surface: Painted
• Tightening Torque [Nm]: 100
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 90
• Height [mm]: 60.5
• Outer Diameter [mm]: 261.7
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 9
• Number of bores: 5
• Brake Disc Type: solid
• Surface: Painted
• Tightening Torque [Nm]: 100
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 89.8
• Height [mm]: 60.5
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 9.5
• Minimum thickness [mm]: 8.4
• Number of bores: 5
• Brake Disc Type: solid
• Surface: Painted
• Tightening Torque [Nm]: 100
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 89.8
• Height [mm]: 60.5
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 9.5
• Minimum thickness [mm]: 8
• Number of bores: 5
• Brake Disc Type: solid
• Tightening Torque [Nm]: 100
• Manufacturer: JAPKO

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 3
• Thickness [mm]: 60
• Outer Diameter [mm]: 262
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.4
• Centering Diameter [mm]: 90
• Weight [kg]: 4.32
• Name: PIDURIKETAS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 11.2003
• Construction Year to: 12.2006
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 262
• Height [mm]: 60.1
• Centering Diameter [mm]: 90.2
• Surface: Coated
• Hole Arrangement/Number: 5/8
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Height [mm]: 60
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Surface: Painted
• Minimum thickness [mm]: 8.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: Vented
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 45.5
• Centering Diameter [mm]: 69
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 3
• Thickness [mm]: 60
• Outer Diameter [mm]: 262
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8.4
• Centering Diameter [mm]: 90
• Weight [kg]: 4.32
• Name: SW 33 10 6465
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2004
• Vehicle Identification Number (VIN): JA4
• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 5
• Number of mounting bores: 4
• Thickness [mm]: 46
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 69
• Weight [kg]: 6.26
• Name: PIDURIKETAS
• Manufacturer: BLP
• Additional information: ADC443104 BLU
• Lisainfo: ADC443104 BLU

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2004
• Vehicle Identification Number (VIN): JA4
• Brake Disc Thickness [mm]: 26
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Centering Diameter [mm]: 69
• for OE number: MR510966
• Height [mm]: 46
• Minimum thickness [mm]: 24.5
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Construction Year from: 11.2003
• Construction Year to: 10.2006
• Fitting Position: Front Axle
• Outer Diameter [mm]: 293
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Height [mm]: 46
• Manufacturer: LPR

• Brake Disc Type: Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.6
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-1057
• Additional information: 19-1057

• Construction Year from: 01.2007
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 59
• Outer Diameter [mm]: 302
• Centering Diameter [mm]: 80
• Brake Disc Thickness [mm]: 10
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Country Specific Design: Australia
• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 69
• Height [mm]: 46
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Number of bores: 5
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Brake Disc Type: Vented
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 45.5
• Centering Diameter [mm]: 69
• Inner Diameter [mm]: 147.8
• Bore Ø [mm]: 12.6
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Minimum thickness [mm]: 8.4
• Height [mm]: 60.3
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 90
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.4
• Height [mm]: 60
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 114.3
• Thread Size: 12,6
• Drum diameter [mm]: 168
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0204/0283
• Name: PIDURIKETAS
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 09.2003
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.4
• Height [mm]: 60.1
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Type: solid
• Centering Diameter [mm]: 90
• Number of Holes: 5
• Surface: Oiled
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 12.8
• Name: PIDURIKETAS
• Manufacturer: BOS

• Brake Disc Thickness [mm]: 24
• Rim Hole Number: 5
• Thickness [mm]: 46
• Outer Diameter [mm]: 294
• Bolt Hole Circle Ø [mm]: 114
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Weight [kg]: 6.96
• Name: PIDURIKETAS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2006
• Rim Hole Number: 5
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 262
• Height [mm]: 60.1
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.4
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.5
• Number of Holes: 5
• Brake Disc Type: solid
• Surface: Zink flake coated
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.6
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Surface: Painted
• Minimum thickness [mm]: 22.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX

• Construction Year from: 11.2003
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 114
• Height [mm]: 46
• Outer Diameter [mm]: 294
• Centering Diameter [mm]: 69
• Brake Disc Thickness [mm]: 24
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Brake Disc Hub Height [mm]: 21.7
• Fitting Position: Front Axle
• Rim Hole Number: 5
• Height [mm]: 45.5
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Outer Diameter [mm]: 294
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Brake Disc Thickness [mm]: 24
• Rim Hole Number: 5
• Thickness [mm]: 45.5
• Outer Diameter [mm]: 294
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Weight [kg]: 6.96
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year from: 01.2004
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0289/1685
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Machining: Untreated
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Height [mm]: 45.6
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8.4
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 60.1
• Centering Diameter [mm]: 90
• Inner Diameter [mm]: 168
• Bore Ø [mm]: 12.5
• Test Mark: E1 90R-02C0248/0730
• Name: Piduriketas
• Manufacturer: ATE

• Brake Disc Thickness [mm]: 24
• Rim Hole Number: 5
• Thickness [mm]: 45.5
• Outer Diameter [mm]: 294
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Weight [kg]: 6.96
• Name: SW 80 92 8440
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 22.4
• Height [mm]: 45.9
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake Disc Type: Vented, slotted/perforated
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.6
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Surface: Painted
• Minimum thickness [mm]: 22.4
• Bolt Hole Circle Ø [mm]: 114
• Name: PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-1057SPORT
• Additional information: 19-1057SPORT

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Height [mm]: 45.6
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Bore Ø 1 [mm]: 12.6
• Thread Size 2: M8
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0185/0551
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.9
• Minimum thickness [mm]: 22.4
• Inner Diameter [mm]: 148
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Ø [mm]: 12.7
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 12.7
• Weight [kg]: 6.9
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 302
• Height [mm]: 58.7
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.6
• Number of Holes: 5
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Height [mm]: 60.3
• Minimum thickness [mm]: 8.4
• Surface: Coated
• Inner Diameter [mm]: 168
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/08
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 4.2
• Name: HE 8DD355118661
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9.5
• Number of Holes: 5
• Height [mm]: 60
• Centering Diameter [mm]: 90
• Outer Diameter [mm]: 262
• Minimum thickness [mm]: 8.4
• Tightening Torque [Nm]: 100
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 262
• Brake Disc Thickness [mm]: 10
• Height [mm]: 60.3
• Minimum thickness [mm]: 8.4
• Surface: Coated
• Inner Diameter [mm]: 168
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/08
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 15.5
• Weight [kg]: 4.2
• Name: PIDURIKETAS
• Manufacturer: TEX

• Construction Year from: 09.2003
• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Height [mm]: 45.9
• Bolt Hole Circle Ø [mm]: 114.3
• Brake Disc Type: Vented
• Centering Diameter [mm]: 69
• Number of Holes: 5
• Surface: Oiled
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 12.7
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 22.4
• Height [mm]: 45.9
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Machining: High-carbon
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO
• Lisainfo: QD7689HC
• Additional information: QD7689HC

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.9
• Minimum thickness [mm]: 22.4
• Surface: Coated
• Inner Diameter [mm]: 148
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Ø [mm]: 12.7
• Weight [kg]: 6.9
• Name: HE 8DD355111571
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Construction Year from: 11.2003
• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Height [mm]: 45.5
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.6
• Number of Holes: 5
• Brake Disc Type: Vented
• Required quantity: 2
• Manufacturer: MEYLE

• Construction Year from: 11.2003
• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Height [mm]: 45.5
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 69
• Bolt Hole Circle Ø [mm]: 114.3
• Wheel Bolt Bore Ø [mm]: 12.6
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 114.3
• Height [mm]: 45.5
• Centering Diameter [mm]: 69
• Inner Diameter [mm]: 147.8
• Bore Ø [mm]: 12.6
• Test Mark: E1 90R-02C0118/0063
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Height [mm]: 45.6
• Weight [kg]: 13.9
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Outer Diameter [mm]: 294
• Number of Holes: 5
• Centering Diameter [mm]: 69
• Tightening Torque [Nm]: 100
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 31.5
• Packaging width [cm]: 31.5
• Packaging height [cm]: 11
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 45.9
• Minimum thickness [mm]: 22.4
• Surface: Coated
• Inner Diameter [mm]: 148
• Bolt Hole Circle Ø [mm]: 114.3
• Centering Diameter [mm]: 69
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Ø [mm]: 12.7
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 12.7
• Weight [kg]: 6.9
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Test Mark: R90 Homologated
• Height [mm]: 60.2
• Weight [kg]: 8.63
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9.5
• Minimum thickness [mm]: 8.4
• Hole Arrangement/Number: 5+3
• Outer Diameter [mm]: 262
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Tightening Torque [Nm]: 100
• Bolt Hole Circle Ø [mm]: 114.3
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 28
• Packaging width [cm]: 28
• Packaging height [cm]: 14
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: internally vented, Perforated
• Surface: Coated
• Outer Diameter [mm]: 294
• Brake Disc Thickness [mm]: 24
• Height [mm]: 46
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 114
• Centering Diameter [mm]: 69
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 6.6
• Hole Arrangement/Number: 7/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 24
• Number of Holes: 5
• Height [mm]: 45.6
• Centering Diameter [mm]: 69
• Outer Diameter [mm]: 294
• Surface: Coated
• Minimum thickness [mm]: 22.6
• Technical Information: ECE R 90 Homologation.
• Name: BR 09.A738.1X
• Manufacturer: BREMBO
• Additional information: BR 09.A738.1X
• Lisainfo: BR 09.A738.1X

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.