Lisainfo: (AM)

• Quantity per packing unit: 10
• contains article number: 13451
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.7
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Weight [kg]: 0.03
• Manufacturer: FEBI
• Lisainfo: 13453 FEBI
• Additional information: 13453 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 59622A
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• for OE number: 09482-00299
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Engine Code: 4G32
• Required quantity: 4
• Quantity per packing unit: 10
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Electrode Gap [mm]: 0.8
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• for OE number: 7700500048
• Connector type: Removable SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Gross Weight [g]: 59
• alternative item: W16TT
• Manufacturer: DENSO

• Engine Code: 4G32
• Electrode Gap [mm]: 0.7
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 4G32
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.7
• Diameter [mm]: 21
• Length [mm]: 73.5
• Thread Size: M14 x 1,25
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 11.1987
• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: BS 0242235663
• Manufacturer: BOSCH

• Engine Code: 4G32
• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 0.8
• Thread Size: M14 x 1,25
• Spanner Size: 20,8
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Engine Code: 4G32
• Electrode Gap [mm]: 0.8
• Quantity per packing unit: 4
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK - NTK
• Additional information: V-LINE 2
• Lisainfo: V-LINE 2

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Construction Year to: 11.1987
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Technical Information Number: RN9YC
• Connector type: M4/SAE
• Container Type: Carton
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE006/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Engine Code: 4G32
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK - NTK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Engine Code: 4G32
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Engine Code: 4G32
• Required quantity: 4
• Quantity per packing unit: 4
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Electrode Gap [mm]: 0.8
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• for OE number: 1WT118110
• Connector type: Crimped SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Gross Weight [g]: 61
• alternative item: IW16TT, IW16
• Manufacturer: DENSO
• Name: Spark plug
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Required quantity: 4
• alternatively:
• Quantity per packing unit: 10
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Electrode Gap [mm]: 0.9
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Connector type: M4/SAE
• Container Type: Carton
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION
• Additional information: CHPCET8
• Lisainfo: CHPCET8

• Required quantity: 4
• alternatively:
• Quantity per packing unit: 10
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Electrode Gap [mm]: 0.9
• Thread Size: M14x1,25
• Thread Length [mm]: 19
• Connector type: M4/SAE
• Spanner Size: 21 mm
• Quality/ Grade: Poly-V Tit
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Manufacturer: BERU

• Engine Code: 4G32
• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 0.8
• Thread Size: M14 x 1.25
• Spanner Size: 20,8
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Construction Year to: 11.1987
• Required quantity: 4
• Quantity Unit: Kit
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: BS 0242235909
• Manufacturer: BOSCH

• Engine Code: 4G32
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Electrode Gap [mm]: 1
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Diameter [mm]: 14
• Connector type: Solid SAE
• Spanner Size: 20.6 mm
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Gross Weight [g]: 61
• alternative item: IW16TT
• Manufacturer: DENSO
• Name: Spark plug
• Quality class: Q

Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: 4G32
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Required quantity: 4
• alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Thread Size: M14x1.25
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Connector type: SAE
• Container Type: Carton
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Engine Code: 4G32
• Electrode Gap [mm]: 0.8
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Manufacturer: NGK - NTK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode