• Filter type: Spin-on Filter
• Length [mm]: 76
• Outer Diameter [mm]: 80
• Fitted Diameter [mm]: 64
• Internal Thread [mm]: M20 x 1,5
• Technical Information Number: By-pass
• Manufacturer: ASHIKA
• Lisainfo: 10-05-599
• Additional information: 10-05-599

• Filter type: Spin-on Filter
• Height [mm]: 75
• Outer Diameter [mm]: 82
• Manufacturer: KAMOKA FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 75
• Thread Size: M 20 X 1.5
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with one anti-return valve
• Outer Diameter 2 [mm]: 65
• Inner Diameter 2 [mm]: 57
• Name: OLIFILTER
• Manufacturer: MAX
• Lisainfo: OF-934
• Additional information: OF-934

• Outer Diameter 1 [mm]: 80
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 55
• Thread Size: M20X1.5
• Height [mm]: 76
• Filter type: Spin-on Filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 67
• Outer Diameter [mm]: 76
• Internal Thread Size: M20 x 1,5
• Weight [kg]: 0.32
• Name: OLIFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Length [mm]: 81
• Outer Diameter [mm]: 90
• Fitted Diameter [mm]: 63
• Internal Thread [mm]: M20 x 1,5
• Manufacturer: JAPKO

• Height [mm]: 75
• Thread Size: M 20 X 1.5
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 55
• Filter type: Spin-on Filter
• Name: CFD DFO2705
• Manufacturer: DACO

• Height [mm]: 76
• Thread Size: M20x1.5
• Diameter 1 [mm]: 81.5
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 80
• Packing Type: Box
• Filter type: Spin-on Filter
• Version: w/ Anti-Drain valve, with By-Pass valve
• Packaging length [cm]: 7.8
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Name: CH COF100110S
• Manufacturer: CHAMPION

• Height [mm]: 67
• Thread Size: M20x1.5
• Diameter 3 [mm]: 58
• Diameter 4 [mm]: 65
• Outer Diameter [mm]: 84
• Filter type: Spin-on Filter
• Manufacturer: DRIVE

• Filter type: Spin-on Filter
• Height [mm]: 75.5
• Outer Diameter [mm]: 78.5
• Thread Size: M20x1,5
• Name: OLIFILTER
• Manufacturer: ALC

• Filter type: Spin-on Filter
• Height [mm]: 75
• Thread Size: M20x1.5
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 81
• Seal Diameter [mm]: 65
• Thread Size: M20x1,5
• Height [mm]: 77
• Manufacturer: HENGST FILTER
• Lisainfo: H13W01
• Additional information: H13W01

• Filter type: Spin-on Filter
• Diameter [mm]: 76, 80
• Height [mm]: 66.1
• Thread Size: M20x1,5
• Diameter 2 [mm]: 64.5
• Seal Diameter [mm]: 58.5
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with one anti-return valve
• Valve type: Overflow Valve
• Net Weight [g]: 294
• Packaging height [cm]: 6.7
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Manufacturer: KNECHT
• Name: KN OC230

• Filter type: Spin-on Filter
• Gasket inner diameter: 57
• Seal Ring Outer Diameter: 65
• Height [mm]: 75
• Thread Size: M20x1.5
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: with one anti-return valve
• Bypass Valve Opening Pressure [bar]: 1
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Filter type: Spin-on Filter
• Height [mm]: 87
• Thread Size: M 20 X 1,5
• Inner Diameter [mm]: 58
• Outer Diameter [mm]: 80
• Inner Diameter 2 [mm]: 65
• Bypass Valve Opening Pressure [bar]: 1
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.