• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Suspension: for vehicles with comfort suspension
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Weight [kg]: 0.102
• Packaging length [cm]: 8.9
• Packaging width [cm]: 3
• Packaging height [cm]: 3
• Manufacturer: FEBEST

• Weight [kg]: 0.143
• Packaging length [cm]: 10
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Supplementary Article/Info 2: with protect screen, with nut
• Weight [kg]: 0.131
• Fitting Position: inner, Rear Axle both sides
• Outer Diameter [mm]: 31
• Quality/ Grade: 10.9
• Required quantity: 2
• Screw length below head [mm]: 78
• Thread Size: M12X1.5
• Thread Length [mm]: 36
• Control/Trailing Arm Type: for control arm
• Name: TG TED37574
• Manufacturer: TEDGUM

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 82
• Outer Diameter [mm]: 126
• Fabrication Number: AD-ME-001
• Manufacturer: NTY

• Outer Diameter [mm]: 88
• Fabrication Number: AD-ME-009
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Material: Plastic
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 127
• Inner Diameter [mm]: 82
• Name: Laager - K„„ndmik DB W204/212 07- L/P
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 18
• Material: Plastic
• Inner Diameter [mm]: 82
• Outer Diameter [mm]: 126.5
• Bearing Type: Rolling Bearing
• Weight [kg]: 0.2
• Version: AM
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Suspension: for vehicles with comfort suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Width [mm]: 18
• Inner Diameter [mm]: 82
• Outer Diameter [mm]: 126.5
• Material: Plastic
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.202
• Name: Laager - K„„ndmik DB W20
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
3 COUPE (E46), 04.99
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with comfort suspension

• Fitting Position: Front Axle
• Block Separation:

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Right, Left, Front Axle
• Width 1 [mm]: 36
• Inner Diameter 1 [mm]: 82
• Outer Diameter 1 [mm]: 121
• Manufacturer: SNR
• Name: SN M251.01

• Fitting Position: Front Axle, both sides
• Quantity per axle: 2
• for OE number: 204 981 00 25, A 204 981 00 25
• Name: Laager - K„„ndmik DB P. W204/212 07- LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides
• Quantity per axle: 2
• for OE number: 204 981 00 25, A 204 981 00 25
• Name: Laager - K„„ndmik DB W20
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without comfort suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Inner Diameter [mm]: 82
• Outer Diameter [mm]: 127
• Height [mm]: 36
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik DB W204/212 07- L/P
• Manufacturer: MEY

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW E46
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

Suspension: for vehicles with comfort suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Name: CFD PK2307
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without increased ground clearance, for vehicles without comfort suspension

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with comfort suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 3 (E46)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 3 (E46)
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0044

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without comfort suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Suspension: for vehicles with comfort suspension
• Quantity per packing unit: 2
• Weight [kg]: 0.4
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY
• Lisainfo: 0146400014
• Additional information: 0146400014

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without comfort suspension

• Fitting Position: Rear Axle
• Suspension: for vehicles with comfort suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Weight [kg]: 0.246
• Packaging length [cm]: 12.6
• Packaging width [cm]: 12.6
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Thermoplast
• Suspension: for vehicles with sports suspension
• Weight [g]: 288
• Component Number: 4
• Name: IM 51023
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Suspension: for vehicles with comfort suspension
• Manufacturer: SACHS

• Suspension: for vehicles with comfort suspension
• for OE number: A 246 326 00 64, 246 326 00 64
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Weight [kg]: 0.32
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without increased ground clearance
• Fitting Position: Front Axle
• Weight [kg]: 0.32
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

Suspension: for vehicles with comfort suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Quantity Unit: Piece
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. DB T. W176 12- LE/PR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• for special equipment code: 459,677,492,486
• Fitting Position: Front Axle
• Weight [kg]: 0.417
• Packaging length [cm]: 21
• Packaging width [cm]: 18.3
• Packaging height [cm]: 9.6
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Fabrication Number: AD-ME-014
• Manufacturer: NTY
• Name: NTY AD-ME-014

• Fitting Position: Front Axle
• for OE number: 2049810025
• Manufacturer: KAMOKA

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.19
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 246 323 00 20, A 246 323 00 20
• Fitting Position: Front Axle Left, Front Axle Right
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Weight [kg]: 0.286
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE ODBOJE I OSLONY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 246 323 00 20, A 246 323 00 20
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. DB P. A-CLASS (W176), A 180 (176.042) 11- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 246 323 00 20, A 246 323 00 20
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• not for trim level: SPORT EDITION
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. DB P. A-CLASS (W176), A 180 (176.042) 11-

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Rubber/Metal
• Supplementary Article/Info 2: with ball bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• for OE number: 2463230020
• Manufacturer: SASIC

• not for trim level: SPORT EDITION
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity Unit: Set
• Manufacturer: MEY

Name: Laager - K„„ndmik. DB P. A-CLASS (W176), A 180 (176.042) 11- LE/PR KPL

• Fitting Position: Front Axle
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: KYB

Technical Information: Suspension mounting + separated suspension bearing / / / Fastenings : suspension mounting bolt/screw (x3)

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik. DB P. W176 12- LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Fitting Position: Right, Left, Front Axle
• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB651.13

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Suspension: for vehicles without sports suspension
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: SK VKDA35870
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Name: COC 49120305
• Manufacturer: CORTECO

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: BI 12-296224
• Quality class: Q