• Construction Year from: 09.1988
• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Length [mm]: 500
• Length [inch]: 20
• Matching Adapter: U
• Adapter enclosed: M+A+B+C
• Blade material: SBR (Styrene butadiene rubber)
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL

Additional information: Valeo raamita klaasipuhastaja, multiconnection 500mm. Lisainfo: Valeo raamita klaasipuhastaja, multiconnection 500mm.

• Thickness [mm]: 1.4
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• DIN/ISO: 7603
• Material: Copper
• Weight [kg]: 0.001
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 22
• Thickness [mm]: 1.5
• Material: Copper
• Inner Diameter [mm]: 18
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Manufacturer: ELRING

• Fitting Position: Front
• Length [mm]: 600
• Manufacturer: KAMOKA WYCIERACZKI

• Transmission ID: 720.504
• Transmission Code: 720,1
• Transmission Type: 4-Speed Automatic Transmission
• Weight [kg]: 0.05
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission ID: 720.504
• Material: Rubber
• Weight [kg]: 0.05
• Transmission Type: for automatic transmission
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 08716 FEBI
• Additional information: 08716 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Height [mm]: 100
• Outer Diameter [mm]: 60
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 18
• SVHC: No SVHC present!
• Manufacturer: FILTRON-CIĘŻARÓWKI

• Engine Code: OM 364.906
• Filter type: Filter Insert
• Outer Diameter [mm]: 60
• Height [mm]: 101
• Name: HšDRAULIKAFILTER,ROOLIMINE
• Manufacturer: BOS

• for OE number: AVX13X950
• Length [mm]: 950
• Width [mm]: 13
• Manufacturer: TRUCKTEC

• Filter type: Filter Insert
• Height [mm]: 101
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 60
• Inner Diameter 1 [mm]: 18
• SVHC: No SVHC present!
• Name: FILTER,T™™HšDRAULIKA
• Manufacturer: MAN

• Driven Units: Alternator
• Width [mm]: 13
• Length [mm]: 1,300
• Manufacturer: JP GROUP
• Lisainfo: V-Belt
• Additional information: V-Belt

• Outer Diameter [mm]: 58
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 18
• Height [mm]: 100
• Manufacturer: HENGST FILTER

• Engine Number to: 286114
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• Height [mm]: 133
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Engine Number to: 286114
• Filter type: Filter Insert
• Height [mm]: 133
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Length [mm]: 597
• Width [mm]: 170
• Height [mm]: 63
• Weight [kg]: 0.759
• Manufacturer: FEBI
• Additional information: 107 819 HP
• Lisainfo: 107 819 HP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 286115
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 83
• Seal Diameter [mm]: 90
• Weight [kg]: 0.094
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 364.906
• Construction Year to: 12.1993
• Engine Number to: ..286114
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 133
• Outer Diameter [mm]: 78
• Inner Diameter 1 [mm]: 23
• Name: OLIFILTER
• Manufacturer: BOS

• Engine Number from: 286115
• Filter type: Filter Insert
• Height [mm]: 133
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Driven Units: Power steering pump
• Tensile Cord Material: PA (polyamide)
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 950
• Outer Length [mm]: 965
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• Engine Code: OM 364.906
• Engine Number from: ..286115
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 133
• Outer Diameter [mm]: 78
• Inner Diameter 1 [mm]: 23
• Manufacturer: BOSCH

• Driven Units: Air compressor
• Required quantity: 2
• Tensile Cord Material: PA (polyamide)
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 1,025
• Outer Length [mm]: 1,040
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• Construction Year from: 09.1986
• Fitting Position: Front
• Length [mm]: 600
• Length [inch]: 24
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 9XW184107241

• Engine Number to: 286114
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 133
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 78
• Inner Diameter 1 [mm]: 23
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Engine Number to: 286114
• Filter type: Filter Insert
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 21
• Height [mm]: 137
• Manufacturer: HENGST FILTER

• Engine Number from: 286115
• Filter type: Filter Insert
• Diameter [mm]: 83.5
• Height [mm]: 136
• Inner Diameter 2 [mm]: 23
• Inner Diameter 3 [mm]: 23.4
• Net Weight [g]: 117
• Packaging height [cm]: 14.5
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: KNECHT

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper
• Alternatively:

• Engine Number to: 286114
• Filter type: Filter Insert
• Diameter [mm]: 83.5
• Height [mm]: 136
• Inner Diameter 2 [mm]: 23
• Inner Diameter 3 [mm]: 23.4
• Net Weight [g]: 129
• Packaging height [cm]: 14.5
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: KNECHT

• Engine Number from: 286115
• Filter type: Filter Insert
• Outer Diameter [mm]: 83
• Inner Diameter [mm]: 21
• Height [mm]: 131
• Manufacturer: HENGST FILTER

• Driven Units: Alternator
• Required quantity: 2
• Tensile Cord Material: PA (polyamide)
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 1,300
• Outer Length [mm]: 1,315
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• Colour: yellow
• Capacity [litre]: 1
• Weight [kg]: 0.95
• Observe service information:
• Name: AUTOMAATKŽIGUKASTI OLI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: yellow
• Capacity [litre]: 1
• Weight [kg]: 0.95
• Observe service information:
• Manufacturer: SWAG
• Lisainfo: 10 90 8972 SWA
• Additional information: 10 90 8972 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 286115
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 133
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 78
• Inner Diameter 1 [mm]: 23
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Fitting Position: Passenger Side, Driver side
• Matching Adapter: T11, T7
• Quantity: 1
• Length [mm]: 600
• Length [inch]: 24
• Adapter enclosed: T11
• Technical Information: Product may differ from images
• Manufacturer: VALEO

• Height [mm]: 55
• Length [mm]: 597
• Width [mm]: 170
• Filter type: Filter Insert
• Name: OHUFILTER
• Manufacturer: ALC

• Construction Year to: 08.1986
• Fitting Position: Front
• Length 1 [mm]: 600
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: BOS

• Filter type: Filter Insert
• Length [mm]: 597
• Width [mm]: 170
• Height [mm]: 55
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: OM 364.906
• for OE number: 004 094 67 04
• Filter type: Filter Insert
• Length [mm]: 597.5
• Width [mm]: 170.5
• Height [mm]: 69.5
• Manufacturer: BOSCH

• Engine Code: OM 364.906
• for OE number: 002 094 94 04
• Filter type: Filter Insert
• Length [mm]: 597.5
• Width [mm]: 170.5
• Height [mm]: 61
• Quantity: 1
• Manufacturer: BOSCH

• Filter type: Filter Insert
• Length [mm]: 598
• Width [mm]: 171
• Height [mm]: 50
• Height 1 [mm]: 61
• SVHC: No SVHC present!
• Name: OHUFILTER
• Manufacturer: MAN

• Filter type: Filter Insert
• Length [mm]: 598
• Width [mm]: 171
• Height [mm]: 61
• Manufacturer: HENGST FILTER

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 34
• Thickness [mm]: 2
• Shape: A Shape
• Material: Copper