• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature, 2 pins
• Additional information: Sender for water temperature, 2 pins

• Number of pins: 2
• Colour: black
• Component Number: 120-06-008
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Fabrication Number: ECT-ME-005
• Number of pins: 2
• Manufacturer: NTY

• Fitting Depth [mm]: 45
• Length [mm]: 89
• Shape: L Shape
• Number of pins: 2
• Manufacturer: KAMOKA

• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Length [mm]: 45.5, 89
• Outer Diameter [mm]: 7, 15
• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 099 905 3800
• Manufacturer: TRUCKTEC

• Length [mm]: 45.5, 89
• Outer Diameter [mm]: 7, 15
• Number of connectors: 2
• Weight [kg]: 0.01
• Name: SW 10 93 7648
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Length [mm]: 88
• Height [mm]: 89.5
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Length [mm]: 24
• Number of pins: 2
• Width [mm]: 15
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: MAX

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358058181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Fitting Position: Rear
• Number of pins: 3

• Fabrication Number: ECP-ME-008
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 05080346AA
• Manufacturer: KAMOKA

• Fabrication Number: ECP-ME-003
• Manufacturer: NTY

• Component Number: EZ8
• Block Separation:
• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Fabrication Number: ECM-ME-005
• Manufacturer: NTY

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 50
• Length from [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Number of pins: 3
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: MAG

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. PORSCHE 911, 911 TARGA, BOXSTER, BOXSTER SPYDER, CAYENNE, CAYMAN 2.7-4.8 07.04-

Manufacturer: MAGNETI MARELLI

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Front, Rear
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: FAST

• Fitting Position: Rear, Front
• Length [mm]: 50
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 24
• Width [mm]: 15
• Thickness [mm]: 80
• Number of connectors: 2
• Weight [kg]: 0.005
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pressure from [kPA]: 10
• Manufacturer: DELPHI
• Name: DE PS10140

• Name: Andur, v„ntvoll
• Manufacturer: MAG

• for OE number: 008 153 02 28
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Fitting Position: both sides, Front, Rear
• Quantity: 6, 4
• Block Separation:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.38
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Number of pins: 3
• Manufacturer: VDO

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 35
• Width [mm]: 48.5
• Thickness [mm]: 43
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 005 153 50 28
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Fitting Position: Rear, Front
• Length [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0001
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Component Number: EZ8
• Block Separation:
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Name: SENSOR, PARKIMISABI
• Manufacturer: BOS

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Number of connectors: 3
• Weight [kg]: 0.018
• Name: Andur, v„ntvoll
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black/white
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• Quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fitting Position: Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Name: SW 10 93 8292
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: black
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: RATTAANDUR, REHVIROHU KONTROLLSšSTEEM
• Manufacturer: HUF
• Additional information: UVS4040
• Lisainfo: UVS4040

General Information: also available with black metal valve UVS4042 or with titani um metal valve UVS4043

• Required quantity: 1
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121591
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Connector Shape: angled
• Fitting Position: in fuel tank
• Fuel Type: Petrol
• Version: AM
• Manufacturer: METZGER

Fitting Position: Front Axle

• Weight [kg]: 0.02
• for OE number: A 004 153 32 28
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: A 276 905 07 00
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Colour: silver
• Tightening Torque [Nm]: 4
• Mounting Type: Bolted
• Valve type: Air Valve
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Supplementary Article/Info 2: with valves, with screw
• Frequency Range [MHz]: 433
• Full Set:
• Recommended change interval [km]: 160,000
• Recommended change interval [years]: 5
• Valve stem material: Aluminium
• Weight [kg]: 0.025
• Observe the vehicle manufacturer specifications:
• for OE number: A 000 905 18 04
• pre-programmed:
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 440
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Construction Year to: 03.2018
• Engine Code: 279.982
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Manufacturer: VALEO

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Engine Code: M 279.982
• Fitting Position: before catalytic converter, Right, Left
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 500
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE