Lisainfo: Control arm bushing, rear

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Fabrication Number: ZTT-ME-011A

• Fitting Position: Rear Axle, both sides
• Inner Diameter [mm]: 12
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: Puks - K„„ndmik DB T. W140 S-KLASA 91-98
• Manufacturer: TED

• Fitting Position: outer, Front, Rear Axle Middle
• Weight [kg]: 0.2
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST
• Additional information: FSTBZAB-026
• Lisainfo: FSTBZAB-026

• Fitting Position: Rear Axle Upper, Front, Rear, Centre, outer
• Fabrication Number: ZTT-ME-000H

• Fitting Position: Rear Axle Left, Rear Axle Right, Front, Upper
• Rod/Strut: for camber strut
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fitting Position: outer, Lower, Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-CH-005A
• Manufacturer: NTY

• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Name: Puks
• Manufacturer: MAX

• Fitting Position: outer, Front, Rear Axle Middle
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.13
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: outer, in front of axle, Rear Axle Upper
• Weight [kg]: 0.105
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP
• Lisainfo: 510452 GSP
• Additional information: 510452 GSP

• Width [mm]: 38
• Thickness [mm]: 39
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Weight [kg]: 0.07
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right, outer General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Weight [kg]: 0.081
• Packaging length [cm]: 3.9
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: inner, Rear Axle Upper, outer
• Fabrication Number: ZTT-ME-000G

• Fitting Position: Rear Axle
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.24
• Name: Paigutus - K„„ndmik DB T.
• Manufacturer: NK

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Upper, Centre, inner
• Weight [kg]: 0.229
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.4
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Width [mm]: 38
• Thickness [mm]: 39
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Weight [kg]: 0.07
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right, outer General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

• Construction Year from: 02.2008
• Fitting Position: both sides, Rear
• Quality: OE Performance
• Colour: silver
• Weight [g]: 213
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Rear Axle Lower, both sides, Front, outer
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 38
• Outer Diameter [mm]: 38.5
• Inner Diameter [mm]: 12.1
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Rear Axle, both sides, Lower, outer
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, Rear, outer
• Required quantity: 2
• Manufacturer: TEDGUM
• Name: TG 00415778
• Lisainfo: 00415778
• Additional information: 00415778

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• for OE number: 2213520127
• Manufacturer: SASIC

• Fitting Position: Rear Axle, both sides, Upper, Front, outer
• Rod/Strut: for camber strut
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Weight [g]: 221
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Length [mm]: 24
• Overall Length [mm]: 48
• Name: IM 31816
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 220 99-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 220 99-
(kvaliteediklass: PJ)"

• Fitting Position: inner, Rear Axle Middle
• Weight [kg]: 0.144
• Packaging length [cm]: 7.3
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Upper, outer, inner
• Name: Puks
• Manufacturer: MAX

• Fitting Position: outer, Rear Axle both sides, Lower
• Required quantity: 2
• paired article number: VKDS 438001
• Length [mm]: 48.3
• Height [mm]: 23
• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 40
• Rod/Strut: Suspension Rod
• Manufacturer: SKF
• Name: SK VKDS438001

• Thickness [mm]: 40
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 39.7
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right
• Weight [kg]: 0.082
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower, inner
• Fabrication Number: ZTT-CH-016A

• Fitting Position: Rear, Centre, outer, Rear Axle Upper, Front
• Weight [kg]: 0.088
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Front, outer
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Height [mm]: 48
• Name: ALT 81086AL
• Manufacturer: ALTE AUTOMOTIVE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.233
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Mounting Type: Bushing
• Packaging length [cm]: 5.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST
• Additional information: FSTMBAB-027Z
• Lisainfo: FSTMBAB-027Z

• Thickness [mm]: 38
• Inner Diameter [mm]: 12.5
• Outer Diameter [mm]: 39.5
• Material: Rubber/Metal
• Weight [kg]: 0.082
• Manufacturer: FEBI BILSTEIN

Fitting Position: Rear Axle Left, Upper, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 78
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 51
• Weight [kg]: 0.27
• Name: PUKS
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 70.3
• Width [mm]: 80
• SVHC: No SVHC present!
• Manufacturer: FAG

• Thickness [mm]: 38
• Inner Diameter [mm]: 12.5
• Outer Diameter [mm]: 39.5
• Material: Rubber/Metal
• Weight [kg]: 0.082
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Upper, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 211 333 11 14
• Fitting Position: outer
• Manufacturer: GSP

• Trim Level: SPORT EDITION + AMG
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)"

• Fitting Position: inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 338070
• Name: SK VKDS338070
• Manufacturer: SKF

• Fabrication Number: ZTP-ME-014

Fitting Position: Rear Axle Left, Rear Axle Right, Upper, Rear, inner

• Thickness [mm]: 78
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 51
• Weight [kg]: 0.27
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Upper, outer, inner
• Weight [kg]: 0.086
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 24
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 80
• Manufacturer: DELPHI
• Name: DE TD732W

• Fitting Position: Lower, outer
• Outer Diameter 1 [mm]: 70
• Inner Diameter 1 [mm]: 24
• Thickness 1 [mm]: 80
• Manufacturer: BGA

• Fitting Position: Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 338011
• Name: SK VKDS338011
• Manufacturer: SKF

• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Block Separation:
• Width [mm]: 45, 80
• Thickness [mm]: 80
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 71, 38
• Weight [kg]: 0.342
• Observe service information:
• Name: Puks - K„„ndmik DB P. W211 02- DOLNEGO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, inner
• Weight [kg]: 0.341
• Packaging length [cm]: 8
• Packaging width [cm]: 7
• Packaging height [cm]: 7
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 53
• Inner Diameter 1 [mm]: 14
• Thickness 1 [mm]: 80
• Manufacturer: BGA

• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Block Separation:
• Width [mm]: 45, 80
• Thickness [mm]: 80
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 71, 38
• Weight [kg]: 0.342
• Observe service information:
• Manufacturer: SWAG
• Name: SW 10 92 1410

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 51
• Height [mm]: 78
• Name: ALT 91765AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides, Lower, Rear
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 71
• Height [mm]: 45
• Name: ALT 83607AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.57
• Name: DY 37-26545
• Manufacturer: DYS

• Fitting Position: inner, Rear Axle Lower
• Weight [kg]: 0.396
• Packaging length [cm]: 7.8
• Packaging width [cm]: 5.1
• Packaging height [cm]: 5.1
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, both sides, Front
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Hydro Mount
• Quantity per axle: 2
• Article number of recommended accessories: 39367 01, 45040 01
• Observe service information:
• Name: Puks - K„„ndmik DB P. W203 DOLNEGO
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 73
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.3
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, inner, Rear Axle Right
• Weight [kg]: 0.06
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.