• Fitting Position: Left Front
• Vehicle Equipment: for vehicles with headlamp cleaning system
• Fabrication Number: EDS-ME-030
• paired article number: EDS-ME-031
• Manufacturer: NTY

• Fitting Position: Right Front
• Vehicle Equipment: for vehicles with headlamp cleaning system
• Fabrication Number: EDS-ME-031
• paired article number: EDS-ME-030
• Manufacturer: NTY

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front, outer
• for OE number: 212 542 00 18, 212 542 01 18, 2E0 907 271F
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Fabrication Number: EPDC-ME-011

• Fitting Position: Left Front
• Vehicle Equipment: for vehicles with headlamp cleaning system

• Fitting Position: both sides, Rear, Front, outer, inner, Centre
• Sensor Type: Ultrasonic Sensor
• Connector Shape: oval
• Shape: angled
• Fabrication Number: EPDC-ME-004
• Manufacturer: NTY
• Name: NTY EPDC-ME-004

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Fitting Position: both sides, Rear, Front, outer, inner, Centre
• Fabrication Number: EPDC-ME-000
• Manufacturer: NTY
• Name: NTY EPDC-ME-000

• Fitting Position: Front, outer, inner, Centre
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Socket colour: black
• Fabrication Number: EPDC-ME-001
• Manufacturer: NTY

• Fitting Position: Front, Rear
• Number of pins: 3

• Quantity: 2
• Fitting Position: outer, Front, Rear
• for model year: 2012, 2013, 2014, 2015
• Number of pins: 3
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Connector Shape: oval

• Construction Year from: 09.2007
• Construction Year to: 12.2010
• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 28SKV017

• Construction Year from: 09.2007
• Construction Year to: 12.2010
• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2010
• Block Separation:
• Model Year from: 2011
• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Fitting Position: Front
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP050
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Right Front
• Vehicle Equipment: for vehicles with headlamp cleaning system

• Fitting Position: Left, Right, outer, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable, Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 50
• Length from [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 50
• Length from [mm]: 49.5
• Width [mm]: 29.3
• Height [mm]: 27.8
• Colour: chrome, black
• Shape: angled
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• for OE number: 221 542 0417
• Fitting Position: Front, Rear
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX
• Lisainfo: 27-1284
• Additional information: 27-1284

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Rear
• Surface: Blank
• Manufacturer: FAST

• for OE number: 212 542 0018
• Fitting Position: Front and Rear
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Front, Rear
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: FAST

• Fitting Position: Rear, Front
• Length [mm]: 50
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Rear
• Surface: Blank
• Manufacturer: FAST

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• for OE number: A 000 905 24 02
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, Rear
• Construction Year to: 12.2010
• Number of pins: 3
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• for OE number: 221 542 04 17, 2E0 919 275
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: inner, Left, Right, Front
• Quantity: 4
• for model year: 2012, 2013, 2014, 2015
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.38
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: both sides, Front
• Quantity: 6
• for model year: 2008, 2009, 2010, 2011
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.38
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: outer, Front
• Construction Year from: 01.2011
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Colour: black
• Chemical Properties: Paintable
• for OE number: 212 542 00 18, 212 542 01 18, 2E0 907 271F
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 221 542 0417
• Fitting Position: Front and Rear
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• Fitting Position: Front, inner, Rear
• Block Separation:
• for facelift:
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality: IAM
• Manufacturer: METZGER

• Fitting Position: Rear, Front
• Length [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0001
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: METZGER

• Construction Year to: 12.2010
• Fitting Position: Front, both sides
• Component Number: 230
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Name: SENSOR, PARKIMISABI
• Manufacturer: BOS

• Required quantity: 4
• Fitting Position: both sides, inner, Front
• for model year: 2012, 2013, 2014, 2015
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141091
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• for model year: 2012, 2013, 2014, 2015
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Construction Year to: 12.2010
• Fitting Position: Front
• Component Number: 220
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Manufacturer: BOSCH

• Required quantity: 6
• Fitting Position: both sides, Front
• for model year: 2008, 2009, 2010, 2011
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141071
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, Rear
• Length [mm]: 49.5
• Width [mm]: 29.3
• Height [mm]: 27.8
• Colour: black, chrome
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0001
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: with plug
• Fitting Position: both sides
• Length [mm]: 49.5
• Width [mm]: 29.3
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Chemical Properties: Over-paintable
• Housing Colour: black
• Weight [kg]: 0.061
• Number of sensors: 1
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with holder, with seal, with shrink squeeze connector, with cable set General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.