Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 12
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Siseläbimõõt [mm]: 24
- Manufacturer: 3RG
-
Installatsiooni pool: 1. Esisild,
1. Tagasild -
Kaal (kg): 0,
036 - Siseläbimõõt [mm]: 12
- Välisläbimõõt 1 [mm]: 26
- Välisläbimõõt 2 [mm]: 30
- Kõrgus (mm): 26
- Manufacturer: 3RG
- Fitting Position: Front Axle both sides
- Inner Diameter 1 [mm]: 12
- Weight [kg]: 0.055
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: E 074955,
N 531716, S 727201 - Spring Type: for vehicles without air suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 15
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
rear, ®15.5 mm -
Additional information: Grommet for stabilizer,
rear, ®15.5 mm
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 28
- Inner Diameter [mm]: 26.5
- Length [mm]: 47
- Width [mm]: 50
- Height [mm]: 54
- for OE number: 9043260881
-
Name: Paigutus -
Kndmik DB T. SPRINTER 97- 27MM - Manufacturer: SAS
- Installatsiooni pool: esisild mõlemapoolselt
- Materjal: Kumm
- Jämedus/Tugevus (mm): 53
- Pikkus (mm): 53
- Laius (mm): 45
- Siseläbimõõt [mm]: 24
- Manufacturer: MERTZ
- Suspension: for vehicles with heavy duty suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 25
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: esisild mõlemapoolselt
- Pikkus (mm): 53
- Siseläbimõõt [mm]: 24
- Materjal: Kumm
- Jämedus/Tugevus (mm): 53
- Laius (mm): 45
- Manufacturer: FAST
-
Fitting Position: Front Axle,
inner - Required quantity: 2
-
Name: Paigutus -
Kndmik DB P. SPRINTER 06- - Manufacturer: TED
-
Vehicle Identification Number (VIN) to: E 074955,
N 513716 - Fitting Position: Rear Axle
- Length [mm]: 53
- Width [mm]: 45
- Thickness [mm]: 53
- Inner Diameter [mm]: 24
- Material: Rubber
- Weight [kg]: 0.071
- Manufacturer: SWAG
- Name: SW 10 79 0090
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Lower - Inner Diameter 1 [mm]: 12.1
- Outer Diameter 1 [mm]: 26
- Thickness 1 [mm]: 26
- Manufacturer: DELPHI
- Name: DE TD1025W
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Siseläbimõõt [mm]: 19,
5 - Manufacturer: 3RG
-
Fitting Position: Rear Axle Upper,
Rear Axle Lower - Length [mm]: 26
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
-
Material: Rubber/
Metal - Weight [kg]: 0.035
- Manufacturer: SWAG
- Name: SW 10 61 0050
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
- Width [mm]: 26
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
- Installatsiooni pool: Tagasild mõlemapoolselt
- Pikkus (mm): 26
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 26
-
Materjal: Kumm/
metall - Manufacturer: FAST
-
Fitting Position: outer,
Rear Axle both sides - Required quantity: 2
- Material: Foam
- paired article number: VKDS 458030
- Name: SK VKDS458030
- Manufacturer: SKF
-
Fitting Position: Front Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 72
- Inner Diameter [mm]: 24
- Manufacturer: GATES PASKI PRZEWODY
-
Installatsiooni pool: esisild mõlemapoolselt,
Tagasild mõlemapoolselt - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 27
- Name: ALT 86072AL
- Manufacturer: ALTE AUTOMOTIVE
- Suspension: for vehicles with heavy duty suspension
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21
- Replace in pairs only:
- Shape: slotted
-
for OE number: 906 326 08 81,
2E0 511 413F - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: esisild mõlemapoolselt
- Jämedus/Tugevus (mm): 56
- Laius (mm): 45
- Siseläbimõõt [mm]: 24
- Manufacturer: MERTZ
-
Vehicle Identification Number (VIN) to: E 074955,
N 513716 - Fitting Position: Rear Axle
- Length [mm]: 53
- Width [mm]: 45
- Thickness [mm]: 53
- Inner Diameter [mm]: 24
- Material: Rubber
- Weight [kg]: 0.071
-
Name: Paigutus -
Kndmik DB P. VITO WEW. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Siseläbimõõt [mm]: 24
- Laagritüüp: Kummipuks
- Quality class: PJ
- Name: Stabilizer mount
- Suspension: for vehicles with reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Upper,
Rear Axle Lower - Length [mm]: 26
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 26
-
Material: Rubber/
Metal - Weight [kg]: 0.035
-
Name: Puks -
Kndmik DB P. 207- 408 - Manufacturer: FEB
- Additional information: FE07200
- Lisainfo: FE07200
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Required quantity: 2
- Inner Diameter [mm]: 32
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Fitting Position: Front
- Material: Rubber
- Manufacturer: KAMOKA
- for SA code: C40
- Fitting Position: Front Axle
- Weight [kg]: 0.109
- Inner Diameter [mm]: 20
- Packaging length [cm]: 5.6
- Packaging width [cm]: 5.4
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
inner - Inner Diameter [mm]: 23
- Required quantity: 2
- Manufacturer: TEDGUM
- Inner Diameter [mm]: 19
- Fitting Position: Rear Axle
- Required quantity: 2
- Manufacturer: TED
Name: Paigutus - Kndmik DB T. SPRINTER 906 ALL 2,1-3,5 06-
- Suspension: for vehicles without reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 20
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
front, ®20 mm -
Additional information: Grommet for stabilizer,
front, ®20 mm
- Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 32
- Laius (mm): 36
- Laagritüüp: Kummipuks
- Name: ALT 85030AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 85
- Inner Diameter [mm]: 15.5
- Manufacturer: GATES PASKI PRZEWODY
-
for SA code: -
PL9- ZM1+C42 - Fitting Position: Rear Axle
- Weight [kg]: 0.165
- Packaging length [cm]: 5.5
- Packaging width [cm]: 5.1
- Packaging height [cm]: 4.7
- Manufacturer: FEBEST
- Installatsiooni pool: Tagasild mõlemapoolselt
- Siseläbimõõt [mm]: 16
- Manufacturer: FAST
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 20
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Installatsiooni pool: Tagasild mõlemapoolselt
- Siseläbimõõt [mm]: 19
- vajaminev tükihulk: 2
- Manufacturer: FAST
-
Vehicle Identification Number (VIN) to: E074955,
N531716, S727201 - Spring Type: for vehicles without air suspension
- Observe service information:
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width [mm]: 54
- Thickness [mm]: 53
- Inner Diameter [mm]: 16
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
- Suspension: for vehicles with standard suspension
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 17
- Replace in pairs only:
-
for OE number: 906 326 07 81,
2E0 511 413G - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Identification Number (VIN) to: N 513716
- Fitting Position: Rear Axle both sides
- Pikkus (mm): 53
- Laius (mm): 45
- Jämedus/Tugevus (mm): 53
- Siseläbimõõt [mm]: 24
- Materjal: Kumm
- Manufacturer: DENCKERMANN FILTRY
- Engine Code: OM642
- Suspension: for vehicles without heavy duty suspension
- Pikkus (mm): 47
- Laius (mm): 52
- Jämedus/Tugevus (mm): 57
- Siseläbimõõt [mm]: 16
- Installatsiooni pool: esisild mõlemapoolselt
- Manufacturer: DENCKERMANN FILTRY
-
Fitting Position: Rear Axle both sides,
inner - Required quantity: 2
- Material: Rubber
- paired article number: VKDS 458031
- Length [mm]: 53.5
- Height [mm]: 45
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 39.9
- Manufacturer: SKF
- Name: SK VKDS458031
- Suspension: for vehicles with standard suspension
- Mounting Type: Rubber Mount
- Required quantity: 2
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 24
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Material: PU
(Polyurethane) -
Fitting Position: inner,
Front Axle - Inner Diameter [mm]: 15
- Required quantity: 2
- Manufacturer: TEDGUM
-
Laagritüüp: Kummi-
metalllaager - Installatsiooni pool: Pealis
- Name: Stabilizer link mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
- Installatsiooni pool: esisild mõlemapoolselt
- Materjal: Kumm
- Jämedus/Tugevus (mm): 57
- Pikkus (mm): 47
- Laius (mm): 53
- Siseläbimõõt [mm]: 23
- Manufacturer: MERTZ
- Fitting Position: Front
- Weight [g]: 102
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 50
- Length [mm]: 45
- Name: IM 32128
- Manufacturer: ORIGINAL IMPERIUM
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
071 - Siseläbimõõt [mm]: 24
- Laagritüüp: Kummipuks
- Kaal (g): 71
- Manufacturer: METALCAUCHO
- for OE number: 906 326 0781
- Inner Diameter [mm]: 15.5
- Mounting Type: Rubber Mount
- Fitting Position: Rear Axle both sides
-
Name: Paigutus -
Kndmik DB T. SPRINTER/ CRAFTER 06- - Manufacturer: TRU
-
Vehicle Identification Number (VIN) to: E 074955,
N 531716, S 727201 - Spring Type: for vehicles without air suspension
- old version:
- Width [mm]: 54
- Thickness [mm]: 53
- Inner Diameter [mm]: 15.5
- Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with reinforced stabiliser bar
- Fitting Position: Front
- Stabiliser Bar Diameter [mm]: 23
- for PR number: 0AC
-
Name: Remondikomplekt,
stabilisaatorilaager - Manufacturer: MAX
-
for SA code: -
ZG1- ZG2- ZG3- ZG4+C45 - Fitting Position: Front Axle
- Diameter [mm]: 23
- Weight [kg]: 0.155
- Inner Diameter [mm]: 20
- Packaging length [cm]: 5.5
- Packaging width [cm]: 5.3
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
- Suspension: for vehicles with reinforced stabiliser bar
- Length [mm]: 45
- Width [mm]: 54
- Thickness [mm]: 53
- Inner Diameter [mm]: 20
- Outer Diameter [mm]: 46
- Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 53
- Weight [kg]: 0.092
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- old version:
-
Width [mm]: 112,
38 - Thickness [mm]: 56
- Inner Diameter [mm]: 36
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 11.3
- Weight [kg]: 0.16
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with reinforced stabiliser bar
- Length [mm]: 45
- Width [mm]: 54
- Thickness [mm]: 53
- Inner Diameter [mm]: 20
- Outer Diameter [mm]: 46
- Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 53
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: E 074955,
N 531716, S 727201 - Spring Type: for vehicles without air suspension
- old version:
- Width [mm]: 54
- Thickness [mm]: 53
- Inner Diameter [mm]: 15.5
- Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: SWAG
- Name: SW 10 93 8536
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: OM 642.993,
OM 642.992, OM 642.896 -
Fitting Position: Front Axle both sides,
Rear Axle both sides - Block Separation:
-
Vehicle Identification Number (VIN) from: E 080282,
N 545385 - new version:
- Length [mm]: 111
- Width [mm]: 47
- Thickness [mm]: 59
- Inner Diameter [mm]: 50
- Inner Diameter 1 [mm]: 10.7
- Weight [kg]: 0.21
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kinnitus - Kndmik STAB. DB P. SPRINTER/CRAFTER 06-
-
Fitting Position: Rear Axle both sides,
inner - Required quantity: 2
- Material: Foam
- paired article number: VKDS 358016
- Inner Diameter [mm]: 24
- Name: SK VKDS358016
- Manufacturer: SKF
- Installatsiooni pool: Tagasild mõlemapoolselt
- Jämedus/Tugevus (mm): 53
- Pikkus (mm): 45
- Laius (mm): 54
- Siseläbimõõt [mm]: 20
- Välisläbimõõt [mm]: 46
- Välisläbimõõt 1 [mm]: 53
- Manufacturer: MERTZ
-
Engine Code: OM 642.993,
OM 642.992, OM 642.896 -
Fitting Position: Front Axle both sides,
Rear Axle both sides - Block Separation:
-
Vehicle Identification Number (VIN) from: E 080282,
N 545385 - new version:
- Length [mm]: 111
- Width [mm]: 47
- Thickness [mm]: 59
- Inner Diameter [mm]: 50
- Inner Diameter 1 [mm]: 10.7
- Weight [kg]: 0.21
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: esisild vasakul,
esisild paremal - vajaminev tükihulk: 2
- Läbimõõt stabilisaator (mm): 20
- Manufacturer: FAST
- Diameter 4 [mm]: 17
- Installatsiooni pool: Tagasild mõlemapoolselt
- pikkus üle kõige (mm): 45
-
Siseläbimõõt [mm]: 15,
5 - Manufacturer: DENCKERMANN FILTRY
-
for SA code: -
ZG1- ZG2- ZG3- ZG4+C40, C42+ZM1, C42+XB6+ZM1 - Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [kg]: 0.157
- Inner Diameter [mm]: 16
- Packaging length [cm]: 5.8
- Packaging width [cm]: 5.3
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 20
- SVHC: No SVHC present!
- Name: LU 819026910
- Manufacturer: FAG
- Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [g]: 150
- Name: IM 32025
- Manufacturer: ORIGINAL IMPERIUM
- Installatsiooni pool: Esisild
- Siseläbimõõt [mm]: 20
- Välisläbimõõt [mm]: 45
- Pikkus (mm): 52
- vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Kõrgus (mm): 47
- Name: ALT 88159AL
- Manufacturer: ALTE AUTOMOTIVE
-
Vehicle Identification Number (VIN) to: N 531716,
E 074955, S 727201 - Spring Type: for vehicles without air suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 15.5
- Required quantity: 2
-
Name: Paigutus -
Kndmik DB P. SPRINTER/ CRAFTER 06- - Manufacturer: MEY
-
Fitting Position: Right,
Left, Front Axle - Diameter [mm]: 23
- Supplementary Article/Info 2: without ball bearing
- Name: COC 80004529
- Manufacturer: CORTECO
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20
- Inner Diameter [mm]: 18.5
- Length [mm]: 60
- Width [mm]: 48
- Height [mm]: 52
- for OE number: 2E0411041E
- Manufacturer: SASIC
-
Installatsiooni pool: esisild paremal,
esisild vasakul - Jämedus/Tugevus (mm): 56
- Laius (mm): 45
- Siseläbimõõt [mm]: 24
- Manufacturer: FAST
- for OE number: 2E0511413
- Fitting Position: Rear Axle
-
Material: Rubber/
Metal - Weight [g]: 160
- Inner Diameter [mm]: 18
- Name: IM 34801
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle,
outer, Upper - paired article number: 1
- Inner Diameter 1 [mm]: 12.2
- Outer Diameter 1 [mm]: 32
- Thickness 1 [mm]: 36
- Manufacturer: DELPHI
- Name: DE TD1831W
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 20
- paired article number: VKDS 358010
- Manufacturer: SKF
- Name: SK VKDS358010
- Fitting Position: Front Axle
- Suspension: for vehicles with reinforced stabiliser bar
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 24
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Vehicle Identification Number (VIN) from: E 074956,
N 531717 - Suspension: for vehicles with heavy duty suspension
- Length [mm]: 48
- Width [mm]: 52
- Inner Diameter [mm]: 18
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.14
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Version: LE&RI
- Inner Diameter 1 [mm]: 15.5
- Thickness 1 [mm]: 45
- Manufacturer: DELPHI
- Name: DE TD4217W
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 11
- Inner Diameter [mm]: 9.5
- Length [mm]: 56
- Width [mm]: 48
- Height [mm]: 47
- for OE number: 9063262181
- Manufacturer: SASIC
- Suspension: for vehicles without reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Stabiliser Bar Diameter [mm]: 20
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- R. WEW20M
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 57
- Pikkus (mm): 48
- Laius (mm): 48
- Siseläbimõõt [mm]: 22
- Välisläbimõõt [mm]: 48
- Manufacturer: FAST
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Materjal: Kumm
- Pikkus (mm): 48
- Laius (mm): 52
- Siseläbimõõt [mm]: 18
- Manufacturer: FAST
-
Fitting Position: Right,
Left, Front Axle - Diameter [mm]: 20
- Supplementary Article/Supplementary Info: without holder
- Manufacturer: CORTECO
- Name: COC 80004531
-
Engine Code: OM 642.992,
OM 642.896, OM 642.993 - Vehicle Identification Number (VIN) to: N 446052
- Suspension: for vehicles with reinforced stabiliser bar
- Block Separation:
- Width [mm]: 45
- Thickness [mm]: 56
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.086
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: OM642
- Vehicle Identification Number (VIN) to: N 446052
- Suspension: for vehicles with reinforced stabiliser bar
- Block Separation:
- Siseläbimõõt [mm]: 24
-
Väliskeere [mm]: M10 x 1,
5 - Manufacturer: DENCKERMANN FILTRY
-
Fitting Position: Rear Axle,
both sides, Rear - Name: DE TD1141W
- Manufacturer: DELPHI
- Installatsiooni pool: esisild mõlemapoolselt
- Pikkus (mm): 47
- Siseläbimõõt [mm]: 23
- Jämedus/Tugevus (mm): 57
- Laius (mm): 53
- Manufacturer: FAST
-
Vehicle Identification Number (VIN) from: E 074956,
N 531717 - Special Purpose Vehicle: not for motor home
- new version:
- Length [mm]: 48
- Width [mm]: 52
- Thickness [mm]: 55
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 50
- Fitting Position: Rear Axle
- Weight [kg]: 0.15
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Paigutus - Kndmik DB T. SPRINTER/CRAFTER 06- 17MM
-
Vehicle Identification Number (VIN) from: E 074956,
N 531717 - Suspension: for vehicles with heavy duty suspension
- Length [mm]: 48
- Width [mm]: 52
- Inner Diameter [mm]: 18
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.14
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with standard suspension
-
Drive Type: Rear-
Wheel Drive - Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles without heavy duty suspension
- Length [mm]: 52
- Width [mm]: 47
- Thickness [mm]: 57
- Inner Diameter [mm]: 16
- Fitting Position: Front Axle
- Weight [kg]: 0.15
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- R. WEW20M
-
Inner Diameter [mm]: 15,
16 - Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: TEDGUM
- Suspension: for vehicles with reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Stabiliser Bar Diameter [mm]: 23
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- 23MM
- Length [mm]: 48
- Width [mm]: 48
- Thickness [mm]: 57
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 48
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.145
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: E 057184,
N 446053 - Length [mm]: 47
- Width [mm]: 53
- Thickness [mm]: 57
- Inner Diameter [mm]: 20
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.15
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: E 074956,
N 531717 - Special Purpose Vehicle: not for motor home
- new version:
- Length [mm]: 48
- Width [mm]: 52
- Thickness [mm]: 55
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 50
- Fitting Position: Rear Axle
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 48
- Width [mm]: 48
- Thickness [mm]: 57
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 48
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.145
- Manufacturer: SWAG
- Name: SW 10 10 8043
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: OM 642.992,
OM 642.896, OM 642.993 - Vehicle Identification Number (VIN) to: N 446052
- Suspension: for vehicles with reinforced stabiliser bar
- Block Separation:
- Width [mm]: 45
- Thickness [mm]: 56
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.086
- Manufacturer: SWAG
- Name: SW 10 94 5446
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: S 727202,
E 074956 - Suspension: for vehicles with heavy duty suspension
- Observe dimensions:
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 18
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB BM 906 SPRINTER 06/06- VW CRAFTER 04/06-07/11 (WZMOCNIONA ALUMINIUM)
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 31.5
- Inner Diameter [mm]: 30
- Length [mm]: 75
- Width [mm]: 70
- Height [mm]: 60
- for OE number: 9063262681
- Manufacturer: SASIC
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 28
- Inner Diameter [mm]: 26.5
- Length [mm]: 68
- Width [mm]: 71
- Height [mm]: 57
- for OE number: 9063262581
- Manufacturer: SASIC
- Suspension: for vehicles without heavy duty suspension
- Length [mm]: 52
- Width [mm]: 47
- Thickness [mm]: 57
- Inner Diameter [mm]: 16
- Fitting Position: Front Axle
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 10
- Stabiliser Bar Diameter [mm]: 17
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB T. SPRINTER/CRAFTER 06- 17MM
-
Vehicle Identification Number (VIN) from: E 057184,
N 446053 - Length [mm]: 47
- Width [mm]: 53
- Thickness [mm]: 57
- Inner Diameter [mm]: 20
- Material: Rubber
- Fitting Position: Front Axle
- Manufacturer: SWAG
- Name: SW 10 93 8683
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 52
- Manufacturer: MAX
Name: Paigutus - Kndmik DB BM 906 SPRINTER 06/06- WZM.ALUMINIUM
-
Fitting Position: inner,
Rear Axle - Inner Diameter [mm]: 29
-
Material: PU
(Polyurethane) - Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Manufacturer: TED
Name: Paigutus - Kndmik DB T. SPRINTER 06- !!!POLIURETAN!!!
-
Material: PU
(Polyurethane) -
Fitting Position: inner,
Front Axle - Inner Diameter [mm]: 23
- Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Manufacturer: TED
Name: Paigutus - Kndmik DB P. SPRINTER 06- Q:23MM !!!POLIURETAN!!!
- Vehicle Identification Number (VIN) from: N 350740
- Length [mm]: 112
- Width [mm]: 38
- Thickness [mm]: 56
- Inner Diameter [mm]: 36
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 11.3
- Weight [kg]: 0.193
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 18
- Outer Diameter [mm]: 52
- Name:
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Left
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Right
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Front Axle,
Lower - Stabiliser Bar Diameter [mm]: 20
- Inner Diameter 1 [mm]: 20
- Thickness 1 [mm]: 45
- Name: DE TD910W
- Manufacturer: DELPHI
- Inner Diameter [mm]: 19
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: PU
(Polyurethane) - Supplementary Article/Info 2: with grease cap
- Manufacturer: TED
Name: Paigutus - Kndmik DB T. SPRINTER 906 ALL 2,1-3,5 06- !!!POLIURETAN!!!
- Suspension: for vehicles with reinforced stabiliser bar
- Quantity per axle: 2
- Fitting Position: Front Axle
- Stabiliser Bar Diameter [mm]: 23
- for PR number: 0AC
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- 23MM
- Suspension: for vehicles without reinforced stabiliser bar
- Quantity per axle: 2
- Fitting Position: Front Axle
- Stabiliser Bar Diameter [mm]: 20
- for PR number: 0AB
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- R. WEW20M
- for OE number: 906 326 1940
- Manufacturer: TRUCKTEC
-
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 10
- Stabiliser Bar Diameter [mm]: 17
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
-
Name: Ootshoovad -
Kndmik. DB SPRINTER BM906 06/ 06- - Manufacturer: MEY
-
Engine Code: OM 642.992,
OM 642.896, OM 642.993 - Vehicle Identification Number (VIN) to: N 446052
- Suspension: for vehicles with reinforced stabiliser bar
- Block Separation:
- Inner Diameter [mm]: 24
-
External Thread Size: M10 x 1,
5 - Fitting Position: Front Axle
- Weight [kg]: 0.62
-
Name: Laagrikomplekt,
stabilisatoor - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles without reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 16
- Stabiliser Bar Diameter [mm]: 20
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- R. WEW20M ZESTAW NA DWIE STRONY Z OBEJMAMI
- Suspension: for vehicles with reinforced stabiliser bar
-
Fitting Position: Front Axle Left,
Front Axle Right - Stabiliser Bar Diameter [mm]: 23
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik DB P. SPRINTER 06- 23MM KPL NA DWIE STRONY Z OBEJMAMI
- Fitting Position: Rear Axle both sides
- Length [mm]: 47
- Width [mm]: 105
- Thickness [mm]: 60
-
Supplementary Article/Info 2: with bolts/
screws - Hole Spacing [mm]: 75
- Weight [kg]: 0.342
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles without reinforced stabiliser bar
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 16
- SVHC: No SVHC present!
- Name: LU 820001330
- Manufacturer: FAG
-
Vehicle Identification Number (VIN) from: E 080282,
N 545385 - Special Purpose Vehicle: not for motor home
- new version:
- Inner Diameter [mm]: 11
- Fitting Position: Rear Axle
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with holder
-
Name: Laagrikomplekt,
stabilisatoor - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quality: OE Performance
-
Material: Rubber,
Cast Aluminium - Operating Mode: Manual
- Fitting Position: Front
- Colour: black
- Weight [g]: 972
- Manufacturer: GATES PASKI PRZEWODY
- Inner Diameter [mm]: 11
- Fitting Position: Rear Axle
- Hole Spacing [mm]: 84
- Weight [kg]: 0.984
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with holder
-
Name: Laagrikomplekt,
stabilisatoor - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks