• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: 5637 NGK
• Lisainfo: 5637 NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat

• Filter type: Filter Insert
• Height [mm]: 117
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 26
• Manufacturer: JP GROUP
• Lisainfo: Oil filter
• Additional information: Oil filter

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 505.550, 505.540
• Manufacturer: ELRING

• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: M 115.951
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 16
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: AJU

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• DIN/ISO: 7603
• Material: Copper
• Weight [kg]: 0.003
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 036.400, 505.550, 505.540
• Manufacturer: ELRING

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• DIN/ISO: 7603
• Material: Copper
• Weight [kg]: 0.003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Material: Copper
• Inner Diameter [mm]: 14
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.72
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 13447 FEBI
• Additional information: 13447 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:
• Name: Rongastihend
• Manufacturer: FIS

• Vehicle Identification Number (VIN) to: 028148
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.7
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Weight [kg]: 0.03
• Manufacturer: FEBI
• Lisainfo: 13453 FEBI
• Additional information: 13453 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 028149
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 21
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Weight [kg]: 0.04
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 25918110
• Manufacturer: KAMOKA

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 20
• for OE number: 46759688
• Manufacturer: KAMOKA

• Engine Code: M 115.951
• Required quantity: 4
• for OE number: 09482-00392
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
RENAULT 9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
RENAULT 9
(kvaliteediklass: Q)"

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat, Fixed SAE connector

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: BP6ES NGK
• Lisainfo: BP6ES NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat

• Fitting Position: Front, Passenger Side, Driver side, both sides
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: MAX

• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: N9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.65
• Packaging width [cm]: 2.45
• Packaging height [cm]: 2.45
• Projection [mm]: 1.5
• Name: CH OE001/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Outer Diameter 1 [mm]: 68
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 26
• Height [mm]: 116
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Driven Units: Alternator
• Length [mm]: 940
• Width [mm]: 10
• Belts: Open-sided, Toothed
• Name: KIILRIHM
• Manufacturer: BOS

• Construction Year to: 01.1976
• Driven Units: Alternator
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 938
• Outer Length [mm]: 948
• Manufacturer: GATES

• Engine Code: M 115.951
• Required quantity: 4
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN W20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Driven Units: Power steering pump
• Length [mm]: 750
• Width [mm]: 13
• Belts: Open-sided, Toothed
• Manufacturer: BOSCH
• Name: BS 1987947648

• Filter type: Filter Insert
• Height [mm]: 116
• Outer Diameter [mm]: 70
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 26
• SVHC: No SVHC present!
• Manufacturer: FILTRON
• Lisainfo: OM 506 FIL
• Additional information: OM 506 FIL

• Filter type: Filter Insert
• Height [mm]: 114.5
• Outer Diameter 1 [mm]: 68.5
• Inner Diameter 1 [mm]: 26
• Name: OLIFILTER
• Manufacturer: ALC

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 117
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 70
• Inner Diameter 1 [mm]: 26
• Name: Olifilter
• Manufacturer: MAX

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1,25
• Spanner Size: 21 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Construction Year to: 01.1976
• Driven Units: Alternator
• Weight [kg]: 0.074
• Length [mm]: 940
• Name: KIILRIHM
• Manufacturer: CON

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape
• Alternatively:

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Manufacturer: CHAMPION

• for OE number: AVX13X1375
• Length [mm]: 1,375
• Width [mm]: 13
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Construction Year to: 01.1976
• Driven Units: Power steering pump
• Weight [kg]: 0.089
• Length [mm]: 750
• Name: KIILRIHM
• Manufacturer: CON

• Construction Year to: 01.1976
• Driven Units: Power steering pump
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 750
• Outer Length [mm]: 765
• Manufacturer: GATES

• Driven Units: Air conditioning compressor
• Length [mm]: 1,375
• Width [mm]: 13
• Belts: Open-sided, Toothed
• Manufacturer: BOSCH
• Name: BS 1987947622

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 400
• Length 2 [mm]: 400
• Wiper blade type: Bracket wiper blade without spoiler
• Name: Klaasipuhastaja kumm
• Manufacturer: MAX

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 116
• Outer Diameter [mm]: 70
• Inner Diameter 1 [mm]: 26
• Manufacturer: BOSCH
• Name: BS 1457429113

• Filter type: Filter Insert
• Diameter [mm]: 69
• Height [mm]: 117
• Inner Diameter 2 [mm]: 26
• Inner Diameter 3 [mm]: 26
• Packaging height [cm]: 12
• Net Weight [g]: 190
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Manufacturer: KNECHT

• Filter type: Filter Insert
• Outer Diameter [mm]: 70
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 27
• Height [mm]: 117
• Manufacturer: HENGST FILTER

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper

• Fitting Position: Driver side, Front
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Matching Adapter: A
• Wiper blade type: Flat wiper blade
• Styling: with spoiler
• Quantity Unit: Piece
• Length [mm]: 400
• Length [inch]: 16
• Similar to picture:
• Manufacturer: CONTINENTAL WYCIERACZKI

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 117
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 68
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 400
• Length 2 [mm]: 400
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: BOS

• Engine Code: M 115.951
• Required quantity: 4
• Fuel Type: CNG/LPG
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN IW20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Height [mm]: 129
• Outer Diameter 1 [mm]: 197
• Inner Diameter 1 [mm]: 121
• Filter type: Filter Insert
• Name: OHUFILTER
• Manufacturer: ALC

• Height [mm]: 129
• Outer Diameter [mm]: 195
• Inner Diameter [mm]: 120
• Inner Diameter 1 [mm]: 120
• Weight [kg]: 0.64
• Filter type: Filter Insert
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722,1
• Height [mm]: 10
• See accessories list for additionally required parts:
• Length [mm]: 135
• Width [mm]: 180
• Weight [kg]: 0.342
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Number: 722.0,..1,..2,W3A040
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Transmission Code: 722.1, W 4 B 025, 722.2, K 4 C 025
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Transmission Code: 722,1
• Weight [kg]: 0.374
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode

• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape

• Filter type: Filter Insert
• Height [mm]: 129
• Inner Diameter [mm]: 120
• Outer Diameter [mm]: 195
• Inner Diameter 1 [mm]: 120
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 167
• Width [mm]: 136
• Height [mm]: 18.5
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER