Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Height [mm]: 10
- Weight [kg]: 0.132
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Height [mm]: 21
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. DB P. W202/ 210 - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Block Separation:
- Thickness [mm]: 20.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 35
- Material: Rubber
- Weight [kg]: 0.018
-
Name: Laager -
Kndmik. DB P. W202/ 210 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Thickness [mm]: 27
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 37.7,
54 - Material: Rubber
- Weight [kg]: 0.031
-
Name: Laager -
Kndmik. DB T. W210/ 211 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with standard suspension
- not for trim level: AVANTGARDE
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 93
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 87
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 62
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Suspension: for vehicles with standard suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Height [mm]: 162
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KAITSEMTS/
KAITSEKUMM, AMORT - Manufacturer: MEY
- Suspension: for vehicles with sports suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Height [mm]: 64
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Fitting Position: Front Axle
- Weight [kg]: 0.074
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Spring Type: for vehicles without air suspension
- Manufacturer: JP GROUP
- Spring Type: for vehicles without air suspension
- not for vehicle type: Avantgarde
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Spring Type: for vehicles without air suspension
- not for vehicle type: Avantgarde
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
-
for SA code: -
489 - Fitting Position: Front Axle
- Weight [kg]: 0.077
- Packaging length [cm]: 15.3
- Packaging width [cm]: 6.8
- Packaging height [cm]: 6.8
- Manufacturer: FEBEST
- Vehicle Identification Number (VIN) to: A967489
- Replace in pairs only:
- Length [mm]: 122
-
External Thread Size: M14 x 1,
5 - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.25
- for OE number: 000 330 00 18
-
Name: MONTAA?IKOMPLEKT,
ROOLISSTEEM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: A967489
- Replace in pairs only:
- Length [mm]: 122
-
External Thread Size: M14 x 1,
5 - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.25
- for OE number: 000 330 00 18
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Spring Type: for vehicles without air suspension
- not for vehicle type: Avantgarde
- Fitting Position: Front Axle
- Name: CFD PK2305
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Spring Type: for vehicles without air suspension
- Suspension: for vehicles with standard suspension
- not for trim level: Avantgarde
- Thickness [mm]: 87
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 62
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.068
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Spring Type: for vehicles without air suspension
- Suspension: for vehicles with standard suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- not for trim level: Avantgarde
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Suspension: for vehicles with sports suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Spring Type: for vehicles without air suspension
- not for vehicle type: Avantgarde
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Fitting Position: Front Axle
- Material: Thermoplast
- Weight [g]: 235
- Component Number: 4
- Name: IM 50311
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Observe technical data:
- Plug housing design: Plug sleeve housing
- Cable insulation material: Silicone
- Cable Length [mm]: 500
-
Manufacturer Restriction: BMW,
Mercedes- Benz - Socket Width [mm]: 2.8
- Number of pins: 2
- Cable Cross Section [mm²]: 1
-
Contact surface: Silver-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +125
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli paranduskomplekt, vntvolli positsiooniandur
- Spring Type: for vehicles without air suspension
- Suspension: for vehicles with standard suspension
- not for trim level: Avantgarde
- Fitting Position: Front Axle
- Weight [kg]: 0.212
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- not for trim level: Avantgarde
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Spring Type: for vehicles without air suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Suspension: for vehicles with sports suspension
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Spring Type: for vehicles without air suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Spring Type: for vehicles without air suspension
- Suspension: for vehicles without increased ground clearance
- Weight [kg]: 0.3
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Upper - Material: Rubber
-
Manufacturer: AUTO-
GH