• Fitting Position: Front Axle, Lower, Rear, outer
• Control/Trailing Arm Type: Control Arm
• Lisainfo: MERCEDES
• Additional information: MERCEDES

• Construction Year to: 07.2006
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

Fitting Position: Front Axle Left, Front Axle Right, Rear, Lower, inner Lisainfo: Rubber mount for wishbone, front, inner, left/right Additional information: Rubber mount for wishbone, front, inner, left/right

Lisainfo: Control arm bushing, rear

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Fabrication Number: ZTT-ME-011A

• Fitting Position: Rear Axle, both sides
• Inner Diameter [mm]: 12
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)"

• Length [mm]: 40.45
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 41.5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.08
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for SA code: -Z04
• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Name: Puks
• Manufacturer: MAX

• Thickness [mm]: 40.4
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.5
• Fitting Position: Rear Axle Left, inner, Rear Axle Right
• Weight [kg]: 0.07
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.13
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Length [mm]: 40.45
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 41.5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.08
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 40.4
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.7
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.7
• Name: Puks - K„„ndmik DB T. W211 02- GàRNEGO TYLNA LE/PR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP
• Lisainfo: 510452 GSP
• Additional information: 510452 GSP

• Fitting Position: Front Axle, outer, Rear, Lower
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 53
• Thickness 1 [mm]: 56
• Manufacturer: DELPHI
• Name: DE TD741W

• Thickness [mm]: 40.4
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.7
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.7
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 52
• for OE number: 2113331914
• paired article number: 2256118
• Manufacturer: SASIC

• Width [mm]: 38
• Thickness [mm]: 39
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Weight [kg]: 0.07
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right, outer General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for SA code: -Z04
• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Weight [kg]: 0.081
• Packaging length [cm]: 3.9
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Lower, Centre, Front Axle Right, Front Axle Left
• Name: COC 49400765
• Manufacturer: CORTECO

• Fitting Position: outer, Rear, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 338012
• Name: SK VKDS338012
• Manufacturer: SKF

• for SA code: -Z04
• Fitting Position: outer, inner, Upper, Rear Axle Upper, Centre
• Name: Puks
• Manufacturer: MAX

• for SA code: -Z04
• Fitting Position: Rear Axle Upper, outer, Front
• Weight [kg]: 0.087
• Packaging length [cm]: 4.1
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• for OE number: 211 330 81 07, 211 330 82 07
• Thickness [mm]: 56
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 52
• Material: Rubber/Metal
• Fitting Position: Front Axle, inner
• Shape: slotted
• Weight [kg]: 0.151
• Name: Puks - K„„ndmik DB P. W211 DOLNEGO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 52
• Thickness 1 [mm]: 62
• Manufacturer: DELPHI
• Name: DE TD740W

• Fitting Position: Rear Axle, Upper, both sides, Front
• Rod/Strut: Pull Rod
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Width [mm]: 38
• Thickness [mm]: 39
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Weight [kg]: 0.07
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right, outer General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Right, Left, Upper
• Name: COC 49398173
• Manufacturer: CORTECO

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Camber Link
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for OE number: 211 330 81 07, 211 330 82 07
• Thickness [mm]: 56
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 52
• Material: Rubber/Metal
• Fitting Position: Front Axle, inner
• Shape: slotted
• Weight [kg]: 0.143
• Manufacturer: SWAG
• Name: SW 10 92 1540

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 45
• Weight [kg]: 0.68
• Name: DY 37-05050-5
• Manufacturer: DYS

• Fitting Position: Rear, outer, Rear Axle Lower
• Weight [kg]: 0.092
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.5
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST
• Additional information: FSTBZAB-034
• Lisainfo: FSTBZAB-034

• Construction Year from: 04.2003
• Construction Year to: 07.2006
• Fitting Position: both sides, Rear
• Quality: OE Performance
• Colour: silver
• Weight [g]: 213
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Rear Axle, Upper, both sides, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: Control Arm
• Name: Puks - K„„ndmik DB T. W211 02- GàRNEGO TYLNA LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, both sides, Front, outer
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 38
• Outer Diameter [mm]: 38.5
• Inner Diameter [mm]: 12.1
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front Axle, Lower, both sides, Rear, outer
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 62
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 60, 52
• Material: Rubber/Metal
• Fitting Position: Upper Front Axle, both sides
• Weight [kg]: 0.186
• Name: Puks - K„„ndmik DB P. W211 GàRNEGO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides, Upper, Lower, outer
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik DB T. W211
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: inner, Upper Front Axle
• Weight [kg]: 0.203
• Packaging length [cm]: 6.2
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Rear, Lower
• Outer Diameter [mm]: 70
• for OE number: 2113331114
• paired article number: 2256119
• Manufacturer: SASIC

• Height [mm]: 56
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 52
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik DB P. W211 DOLNEGO
• Manufacturer: MEY

Fitting Position: outer, Rear, Lower, Front Axle Left, Front Axle Right

• Fitting Position: Rear Axle Upper, Front, both sides
• Mounting Type: Rubber-Metal Mount
• for OE number: 2303503606, 2303503506
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Weight [g]: 221
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Length [mm]: 24
• Overall Length [mm]: 48
• Name: IM 31816
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: inner, Rear Axle Lower, Rear
• Weight [kg]: 0.076
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST

• Thickness [mm]: 62
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 60, 52
• Material: Rubber/Metal
• Fitting Position: Upper Front Axle, both sides
• Weight [kg]: 0.262
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper Front Axle, both sides
• Mounting Type: Rubber-Metal Mount
• for OE number: 2113306807, 2113309007, 2113306707, 2113308907
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: A989999, X211967
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 17
• Outer Diameter [mm]: 70
• Width [mm]: 45
• Quantity per axle: 2
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Upper
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 51.5
• for OE number: Part of 2113306707
• Manufacturer: SASIC

• Construction Year to: 07.2006
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Height [mm]: 62
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 52
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik DB P. W211 GàRNEGO
• Manufacturer: MEY

• Fitting Position: Front Axle, both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 52
• Outer Diameter [mm]: 10
• Height [mm]: 62
• Required quantity: 4
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle, Lower, Front, outer
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Height [mm]: 48
• Name: ALT 81086AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower, Front, Front Axle both sides
• Overall Length [mm]: 80
• Outer Diameter [mm]: 70.4
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.233
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Mounting Type: Bushing
• Packaging length [cm]: 5.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST
• Additional information: FSTMBAB-027Z
• Lisainfo: FSTMBAB-027Z

• Fitting Position: Rear Axle Right, Rear Axle Left
• Mounting Type: Rubber-Metal Mount
• Name: COC 49401189
• Manufacturer: CORTECO

• Trim Level: HYDRO SB
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides, Upper
• Manufacturer: LEMFÖRDER
• Name: LMI 4349501

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower, Rear Axle Right, Rear Axle Left
• Material: Rubber/Metal
• Manufacturer: CORTECO
• Name: COC 49398204

• Fitting Position: Front Axle, Lower, both sides, Rear, outer
• Control/Trailing Arm Type: Control Arm
• Article number of recommended accessories: 39447 01
• Observe service information:
• Name: Puks - K„„ndmik DB P. W211 02- DOLNEGO
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 70.3
• Width [mm]: 80
• SVHC: No SVHC present!
• Manufacturer: FAG

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, both sides, inner
• Name: Puks - K„„ndmik DB P. W211 DOLNEGO
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear, Lower
• Outer Diameter [mm]: 70
• for OE number: 2113332914
• Manufacturer: SASIC
• Additional information: 2256151
• Lisainfo: 2256151

• for OE number: 211 333 11 14
• Fitting Position: outer
• Manufacturer: GSP

• Construction Year from: 07.2005
• Construction Year to: 06.2006
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 211 02-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, both sides, inner, Lower
• Control/Trailing Arm Type: for control arm
• Name: PUKS
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for SA code: -Z04
• Fitting Position: inner, Upper, Rear Axle Upper, Centre, outer
• Weight [kg]: 0.152
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Thickness [mm]: 78
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 51
• Weight [kg]: 0.27
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 70
• Height [mm]: 80
• Name: ALT 81096AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 24
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 80
• Manufacturer: DELPHI
• Name: DE TD732W

• Fitting Position: Lower, outer
• Outer Diameter 1 [mm]: 70
• Inner Diameter 1 [mm]: 24
• Thickness 1 [mm]: 80
• Manufacturer: BGA

• Fitting Position: Rear, inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 338011
• Name: SK VKDS338011
• Manufacturer: SKF

• Thickness [mm]: 78
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 51
• Weight [kg]: 0.27
• Name: PUKS
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 80
• Diameter 1 [mm]: 70
• Diameter 2 [mm]: 46
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 17.5
• Fitting Position: Front Axle, Lower, both sides, Rear, inner
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Trim Level: HYDRO SB
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 203 00-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W 203 00-
(kvaliteediklass: PJ)"

• Mounting Type: Hydro Mount
• Fitting Position: Front Axle, Lower, both sides, Front
• Name: Puks - K„„ndmik DB P. W211 GàRNEGO
• Manufacturer: MAX

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Block Separation:
• Width [mm]: 45, 80
• Thickness [mm]: 80
• Inner Diameter [mm]: 24
• Outer Diameter [mm]: 71, 38
• Weight [kg]: 0.342
• Observe service information:
• Name: Puks - K„„ndmik DB P. W211 02- DOLNEGO
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.