Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Type: for 7-
speed automatic transmission - Supplementary Article/Supplementary Info: without oil
- Manufacturer: ZF
- Name: ZF 5961.303.474
SVHC: No information available, please contact the manufacturer!
-
Transmission ID: 722.600-
722.699 -
Supplementary Article/Supplementary Info: without oil,
with gasket/ seal -
Transmission Code: W5A 900,
W5A 580, W5A 380, W5A 330, 722, 6 -
Transmission Type: 5-
Speed Automatic Transmission - Alternatively:
- Quantity Unit: Set
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- Weight [kg]: 0.718
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission number to: 2834526
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Colour of operating fluid: red
- Capacity [litre]: 6
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with seal ring,
with bolts/ screws - Specification: MB 236.14
- not for special equipment code: A89
- Weight [kg]: 6.05
- Observe service information:
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Colour of operating fluid: blue
- Capacity [litre]: 6
- Specification: MB 236.15
- for special equipment code: A89
- Weight [kg]: 6.369
- Observe service information:
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: FEB
- Lisainfo: 171785 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: 722.998,
722.999 - not for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with accessories
-
Alternative Repair Kit: 014 135 1202/
XK, 014 135 1212 - Vehicle Equipment: for vehicles without torque converter drain screw
- Capacity [litre]: 6
- Supplementary Article/Info 2: with oil quantity for standard oil change
- Specification: MB 236.14
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: MEY
Transmission Code: W7X 700, W7N 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722.9 General Information: MEYLE Hydraulic filter complies with OEM specification Combi-Media® .
- Transmission Code: 722.6
-
Transmission Type: 5-
Speed Automatic Transmission - Capacity [litre]: 7
-
Supplementary Article/Supplementary Info: with gasket/
seal - Filter type: Filter Insert
- Supplementary Article/Info 2: with oil quantity for standard oil change
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: AIC
Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Transmission ID: 722.600-
722.699 - Manufacturer Approval (licensed): 236.14
- Vehicle Equipment: for vehicles with torque converter drain screw
- Capacity [litre]: 7
-
Transmission Code: W5A 580,
W5A 900, W5A 380, W5A 330, 722.6 - Quantity Unit: Set
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Transmission Type: 5-
Speed Automatic Transmission - Weight [kg]: 7.81
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 4
- Name: ZESTAW SERWISOWY WYMIANY OLEJU SKRZYNI BIEGàW DB
- Manufacturer: VAI
Supplementary Article/Info 2: with seal ring, with oil quantity for standard oil change General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission ID: 722.998,
722.999 - not for special equipment code: A89
-
Transmission Type: 7-
Speed Automatic Transmission - Vehicle Equipment: for vehicles without torque converter drain screw
- Capacity [litre]: 12
- Specification: MB 236.14
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: MEY
Transmission Code: W7X 700, W7N 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722.9 Supplementary Article/Supplementary Info: with oil quantity for comprehensive oil change, with accessories General Information: Our MEYLE-KITS are available with various amounts of oil The MEYLE standard kit (100 135 xxxx) contains the necessary amount of oil for the service interval so that an exact oil change can be performed. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
- Manufacturer Approval: 236.15
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 724.2
- suited for engine type: Hybrid
- Quality: ZF LifeGuardFluid
- Specification: 7.2 MB ATF
- Alternative Repair Kit: 5961.303.474
- Capacity [litre]: 9
- Supplementary Article/Supplementary Info: contains complete oil change kit
- Manufacturer: ZF
- Name: ZF 5961.308.372
SVHC: No information available, please contact the manufacturer!
- Manufacturer Approval (licensed): 236.14
- Capacity [litre]: 11
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with seal ring,
with oil quantity for oil flushing - Quantity Unit: Set
- Weight [kg]: 13.631
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 Transmission Code: W7N 700, 7G-Tronic, W7X 700, W7C 700, W7C 1000, W7B 700, K7C 1000, 722,9 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks