• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 69.5
• Width [mm]: 62
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 157
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: In-Line Filter
• Length [mm]: 159
• Housing material: Metal
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: A220201
• Engine Code: 120.980
• Filter type: In-Line Filter
• Height [mm]: 165
• Outer Diameter [mm]: 83
• Outer Diameter 1 [mm]: 75
• Inlet Ø [mm]: 9
• Outlet Ø [mm]: 9
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 587004

• Filter type: In-Line Filter
• Housing material: Metal
• Length [mm]: 159
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 045 090 5203
• Filter type: In-Line Filter
• Manufacturer: TRUCKTEC

• Vehicle Identification Number (VIN) to: A220200
• Engine Code: 120.980
• Diameter [mm]: 90
• Outer Diameter 1 [mm]: 80
• Height [mm]: 147.5
• Outer Diameter [mm]: 74.5
• Thread Size Entry: M 12 X 1,5
• Thread Size Exit: M 14 X 1,5
• Filter type: Spin-on Filter
• Weight [kg]: 0.323
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Height [mm]: 168
• Outer Diameter [mm]: 81
• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 89
• Thread Size Entry: M 12 X 1.5
• Thread Size Exit: M 14 X 1.5
• Manufacturer: DRIVE

• Diameter [mm]: 164
• Width [mm]: 25
• Fitting Position: Rear Axle
• Brake System: TEVES
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Filter type: In-Line Filter
• Outer Diameter [mm]: 82
• Thread Size: M14X1,5
• Thread Size 1: M12X1,5
• Height [mm]: 168
• Name: MU FB191
• Manufacturer: MULLER FILTER

• Fitting Position: Rear Axle
• Width 1 [mm]: 61.7
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 91
• Thread Size 1: M12X1.5
• Thread Size 2: M14X1.5
• Height [mm]: 170
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Article number of recommended accessories: 98013500
• Fitting Position: Front Axle
• Height [mm]: 84.5
• Thickness [mm]: 18.8
• Wear Warning Contact: prepared for wear indicator
• Brake System: Girling
• Width [mm]: 102
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: A220201
• Diameter [mm]: 82
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 157
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Length [mm]: 62
• Height [mm]: 69.5
• Thickness [mm]: 16
• WVA Number: 21305
• Manufacturer: ASHIKA

• Vehicle Identification Number (VIN) from: A 220201
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 81
• Height [mm]: 161
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: BOSCH

• Vehicle Identification Number (VIN) to: 220200
• Filter type: In-Line Filter
• Outer Diameter [mm]: 83
• Overall Length [mm]: 147
• Manufacturer: HENGST FILTER

• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 69.8
• Thickness [mm]: 15.3
• Braking System: only in conjunction with steel brake discs
• Fitting Position: Rear Axle
• Width [mm]: 62
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Connecting thread: M14x1,5
• Diameter [mm]: 86
• Supplementary Article/Supplementary Info: with gaskets/seals
• Filter type: Spin-on Filter
• Thread Size: M12X1,5
• Material: Steel
• Height [mm]: 172.3
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Height [mm]: 69.8
• Brake System: ATE
• Width [mm]: 61.7
• Thickness [mm]: 15.3
• Manufacturer: LPR

• Fitting Position: Front Axle
• Width [mm]: 99.6
• Height [mm]: 84.5
• Thickness [mm]: 18.9
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Length [mm]: 61.6
• Width [mm]: 70
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.4
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.84
• Name: SW 10 91 6158
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 69.7
• Thickness [mm]: 15.4
• WVA Number: 21305
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.88
• Manufacturer: VALEO
• Name: VA 301617

• Fitting Position: Rear Axle
• Width [mm]: 62
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 69.6
• Height [mm]: 61.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE-TEVES
• Manufacturer: OPTIMAL ZAWIESZENIE

• for OE number: 004 420 1620
• Fitting Position: Rear Axle
• Manufacturer: TRUCKTEC

• Filter type: Spin-on Filter
• Height [mm]: 167
• Outer Diameter [mm]: 81.5
• Thread Size Entry: M14x1.5
• Thread Size Exit: M 12 X 1.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: 120.980
• Filter type: Spin-on Filter
• Height [mm]: 167
• Outer Diameter [mm]: 82
• Thread Size Entry: M 12x1,25
• Thread Size Exit: M 14x1,5
• Weight [kg]: 0.37
• Name: VA 587205
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Width [mm]: 62
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Thickness [mm]: 15.4
• Length [mm]: 61.6
• Height [mm]: 69.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: Ate-teves
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) from: 220201
• Filter type: In-Line Filter
• Outer Diameter [mm]: 75
• Overall Length [mm]: 155
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• FMSI Code: D603-7484
• Test Mark: E9 90R-01825/1049
• WVA Number: 21305
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 62.1
• Width 2 [mm]: 61.8
• Height 1 [mm]: 69.6
• Height 2 [mm]: 69.6
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP841

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 16
• Length [mm]: 61.4
• Height [mm]: 69.5
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: Teves
• WVA Number: 21305
• Name: SK VKBP90502
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01708/016
• Height [mm]: 69.8
• Width [mm]: 61.7
• Thickness [mm]: 15.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Height [mm]: 70
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Filter type: In-Line Filter
• Outer Diameter [mm]: 91
• Overall Length [mm]: 167
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21305
• Thickness [mm]: 15.4
• Width [mm]: 61.8
• Height [mm]: 69.7
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Filter type: In-Line Filter
• Height [mm]: 168
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 89
• Thread Size Entry: M12x1.5
• Thread Size Exit: M 14 X 1.5
• SVHC: 7439-92-1; Lead
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Rear Axle
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 70
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21305
• Manufacturer: BREMBO
• Name: BR P 50 017

• Fitting Position: Front Axle
• FMSI Code: D689-7564
• Test Mark: E1 90R-011041/1930
• WVA Number: 21303
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 99.7
• Width 2 [mm]: 99.5
• Height 1 [mm]: 84.5
• Height 2 [mm]: 84.5
• Thickness 1 [mm]: 18.8
• Thickness 2 [mm]: 18.8
• Name: DE LP842
• Manufacturer: DELPHI
• Additional information: LP842 DELPHI
• Lisainfo: LP842 DELPHI

• Length [mm]: 99.6
• Width [mm]: 84.5
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.85
• Name: SW 10 91 6096
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Width [mm]: 62
• Height [mm]: 70
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 250-151
• Width [mm]: 61.8
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21305
• Brake System: Teves
• Weight [kg]: 0.8
• Name: HE 8DB355007581
• Manufacturer: HELLA PAGID

• Filter type: In-Line Filter
• Diameter [mm]: 82
• Height [mm]: 168.5
• Thread Size Entry: M12x1,5
• Thread Size Exit: M14x1,5
• Packaging height [cm]: 17.5
• Net Weight [g]: 336
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Name: KN KL38
• Manufacturer: KNECHT

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Brake System: ATE
• Test Mark: E1 90R-02A0498/0585
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 13.0460-0236.2, 13.0460-0239.2, 24.8190-0401.2, 24.8190-0410.2

• Fitting Position: Rear Axle
• Article number of recommended accessories: 98013500
• Width [mm]: 61.8
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21305
• Brake System: Teves
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Thickness [mm]: 16
• Test Mark: R90 Homologated
• Width [mm]: 62
• Height [mm]: 69
• Weight [kg]: 0.85
• Height 1 [mm]: 69
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21305
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Front Axle
• Width [mm]: 100
• Thickness [mm]: 19
• Height [mm]: 86
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Girling
• WVA Number: 21303
• Name: BR P 50 018
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R 01705/033
• Height [mm]: 84.5
• Width [mm]: 99.6
• Thickness [mm]: 18.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate
• Article number of recommended accessories: 1 987 474 403
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21303
• Thickness [mm]: 18.3
• Width [mm]: 99.5
• Height [mm]: 84.7
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle
• Article number of recommended accessories: 98013500, 82500200
• Width [mm]: 99.3
• Height [mm]: 84.4
• Thickness [mm]: 18.8
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21303
• Brake System: Girling
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 2
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Width [mm]: 99.6
• Height [mm]: 84.5
• Thickness [mm]: 18.9
• Brake System: ATE
• Test Mark: E9 90R-02A1162/1050
• MAPP code available:
• Article number of recommended accessories: 13.0460-0263.2, 24.8190-0401.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Brake System: ATE
• Width [mm]: 100
• Height [mm]: 84
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN