• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Version: 9015400117
• Pikkus (mm): 105
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Netokaal [kg]: 0,02

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Pikkus (mm): 120
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Netokaal [kg]: 0,01
• Lisainfo: .
• Additional information: .

• Fitting Position: Front Axle
• Connecting thread: M12x1.5
• Quantity per packing unit: 2
• Pikkus (mm): 21
• Keermemõõt: M12x1,5
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-50
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M12x1.5 21,0mm Torx-50 2tk
• Additional information: M12x1.5 21,0mm Torx-50 2tk

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-ME-002

• Fitting Position: Rear Axle, Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 205
• Manufacturer: JPN

• Fitting Position: Front Axle
• Connecting thread: M8x1.25
• Quantity per packing unit: 2
• Pikkus (mm): 20
• Keermemõõt: M8x1,25
• Pöördeliik: koos väliskeermega
• Võtmekaugus: PH3
• Name: Kruvi,piduriketas
• Manufacturer: QBK

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-ME-003
• Manufacturer: NTY

• Fitting Position: Rear Axle, Front Axle
• Pikkus (mm): 185
• Piduriliik: Ketaspidur
• Kaal (kg): 0,005
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2000
• Engine Code: OM 602.980
• Piduriliik: Ketaspidur
• Pikkus (mm): 120
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Installatsiooni pool: Esisild
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Pikkus (mm): 185
• Manufacturer: FAST

• Engine Code: OM 602.980 D LA
• Construction Year to: 03.2000
• Installatsiooni pool: Esisild, Tagasild
• Piduriliik: Ketaspidur
• Hoiatuskontakti pikkus (mm): 205
• Kaal (kg): 0,004
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake System: ATE, Bosch, Perrot
• WVA Number: 21576, 21577
• Quantity per packing unit: 2
• Pikkus 1 [mm]: 190
• Piduriliik: Ketaspidur
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Wear indicator
• Quality class: PJ

Additional information: "Tootja: DELPHI
MERCEDES
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MERCEDES
(kvaliteediklass: PJ)"

• Construction Year to: 03.2000
• Fitting Position: Front Axle
• Pikkus (mm): 210
• Piduriliik: Ketaspidur
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Pikkus (mm): 185
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Brake System: ATE
• for brake disc diameter [mm]: 258
• Installatsiooni pool: Tagasild
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: Perrot
• Brake Caliper Type: Brake Caliper (2 pistons)
• for piston diameter [mm]: 44
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 210
• Kaal (kg): 0,03
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake System: Bosch
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Installatsiooni pool: Tagasild
• Pidurisüsteem: BOSCH
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2611A

• Fitting Position: Rear Axle
• alternative OE number: 9015400117
• Piduriliik: Ketaspidur
• Pikkus (mm): 190
• Kaal (kg): 0,03
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE, Bosch, Perrot
• WVA Number: 21576, 21577
• Quantity per packing unit: 2
• Pikkus (mm): 99
• Piirangutega toode/piirangu info: Sillakomplekt
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Manufacturer Restriction: Bosch
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 210
• pakendi pikkus [cm]: 20
• pakendi laius [cm]: 12
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,01
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE, Bosch, Perrot
• WVA Number: 23990, 23991
• Quantity per packing unit: 2
• Pikkus (mm): 105
• Piirangutega toode/piirangu info: Sillakomplekt
• Manufacturer: QUICK BRAKE
• Name: QB WS0251A

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc diameter [mm]: 258
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: ATE, Bosch, Perrot
• WVA Number: 23990, 23991
• Quantity per packing unit: 2
• Pikkus 1 [mm]: 185
• Piduriliik: Ketaspidur
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0191

• Fitting Position: Rear Axle
• Pidurisüsteem: BOSCH
• Kaal (kg): 0,04
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Connecting thread: M8x1.25
• Quantity per packing unit: 2
• Pikkus (mm): 20
• Keermemõõt: M8x1,25
• Pöördeliik: koos väliskeermega
• Võtmekaugus: PH3
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Pidurisüsteem: ATE
• Kaal (kg): 0,04
• Tootja piirang: ATE
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Pidurisüsteem: ATE
• Installatsiooni pool: Esisild
• Name: Lisakomplekt,Pidurisadul
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (1 piston)
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Pidurisüsteem: ATE
• Kaal (kg): 0,08
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, Rear Axle
• Pidurisüsteem: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 185
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 185
• pakendi pikkus [cm]: 20
• pakendi laius [cm]: 12
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,011
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Brake System: Bosch
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0370
• Quality class: PJ

Additional information: "Tootja: DELPHI
MERCEDES SPRINTER
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MERCEDES SPRINTER
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Connecting thread: M12x1.5
• Quantity per packing unit: 2
• Pikkus (mm): 21
• Keermemõõt: M12x1,5
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-50
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Tootja piirang: BOSCH
• Piduriketta liik: täis
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc diameter [mm]: 258
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0294

Additional information: "Tootja: DELPHI
SPRINTER 4-T PLATFOR
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SPRINTER 4-T PLATFOR
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Brake System: Bosch
• Brake Caliper Type: Brake Caliper (2 pistons)
• for piston diameter [mm]: 45
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Tootja piirang: ATE
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: Esisild, Tagasild
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901213

• Construction Year to: 03.2000
• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc diameter [mm]: 258
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-014
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-VW-015
• Manufacturer: NTY

• Fitting Position: Front Axle
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (1 piston)
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake pads fitting kit
• Quality class: PJ

Additional information: "Tootja: DELPHI
MERC.SPRINTER/VITO
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MERC.SPRINTER/VITO
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear Axle
• Tootja piirang: PERROT
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: Tagasild vasakul
• Siseläbimõõt [mm]: 78
• Välisläbimõõt [mm]: 310
• paaris tootenumbrid: 131-07-602
• Värv: must
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Tootja piirang: ATE
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Construction Year to: 03.2000
• Fitting Position: Rear Axle
• Brake System: Bosch
• Manufacturer: BOSCH

• Construction Year to: 03.2000
• Fitting Position: Front Axle, Rear Axle
• Brake System: ATE
• Brake Caliper Type: Brake Caliper (1 piston)
• Block Separation:
• for brake disc diameter [mm]: 272
• Manufacturer: BOSCH

• Installatsiooni pool: Tagasild vasakul
• Välisläbimõõt [mm]: 310
• Siseläbimõõt [mm]: 78
• Manufacturer: JP GROUP
• Lisainfo: Splash Panel, brake disc
• Additional information: Splash Panel, brake disc

• Installatsiooni pool: Tagasild paremal
• Siseläbimõõt [mm]: 78
• Välisläbimõõt [mm]: 310
• paaris tootenumbrid: 131-07-601
• Värv: must
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 03.2000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• paaris tootenumbrid: 19-3257
• Installatsiooni pool: Tagasild vasakul
• Name: PLEKK,PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-3256
• Additional information: 19-3256

• Construction Year to: 03.2000
• Engine Code: OM 602.980
• Installatsiooni pool: Tagasild
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 670
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Required quantity: 2
• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Name: CZUJNIK ABS DB T. SPRINTER /LT 96- 1750MM
• Manufacturer: BRM

• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: 8125 23226
• Pealispind: Krundeeritud keemiliselt
• Läbimõõt 1/Läbimõõt 2 (mm): 310/78
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: 8125 23227
• Pealispind: Krundeeritud keemiliselt
• Läbimõõt 1/Läbimõõt 2 (mm): 310/78
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Manufacturer: AUTO-GH

• paaris tootenumbrid: 233314
• Läbimõõt 1/Läbimõõt 2 (mm): 310/78
• Installatsiooni pool: Tagasild vasakul
• Netokaal [kg]: 0,5
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Required quantity: 2
• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Quantity: 2
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 2 260
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: V30-2572
• Materjal: Raudplekk
• Pealispind: tsingitud
• Kaal (kg): 0,557
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paaris tootenumbrid: 171528
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 0,51
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 171527
• Installatsiooni pool: Tagasild paremal
• Kaal (kg): 0,51
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2000
• Fitting Position: Front Axle
• for piston diameter [mm]: 44
• Manufacturer Restriction: Perrot
• Brake Caliper Type: Brake Caliper (2 pistons)
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Length [mm]: 2,300
• Number of pins: 2
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV148
• Manufacturer: ESEN SKV

• Kaablipikkus (mm): 2 244
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Length [mm]: 2,220
• Number of pins: 2
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV149
• Manufacturer: ESEN SKV

• Installatsiooni pool: Tagasild paremal
• Materjal: Raudplekk
• Pealispind: tsingitud
• paaris tootenumbrid: V30-2571
• Kaal (kg): 0,544
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kaablipikkus (mm): 1 749
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Quantity: 2
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 790
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Front Axle
• Quantity: 2
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 2 260
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Ühenduste arv: 2
• Takistus [oom]: 1 800
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 2 244
• Kaal (kg): 0,154
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Takistus [oom]: 1 800
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 2 244
• Kaal (kg): 0,154
• Name: SW 10 10 6838
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: Bosch
• Brake Caliper Type: Brake Caliper (2 pistons)
• for piston diameter [mm]: 45
• Quantity per packing unit: 7
• Name: DE LX0575
• Manufacturer: DELPHI

• Ühenduste arv: 2
• Takistus [oom]: 1 800
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 749
• Kaal (kg): 0,125
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• pikkus üle kõige (mm): 1 823
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 745
• paaris tootenumbrid: 30765
• Kaal (kg): 0,19
• Manufacturer: A.B.S.

• Ühenduste arv: 2
• Takistus [oom]: 1 800
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 749
• Kaal (kg): 0,125
• Name: SW 10 10 6887
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.