• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-ME-004
• Manufacturer: NTY

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 102
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: TRW
• Length [mm]: 93
• Manufacturer: TRW
• Additional information: GIC242
• Lisainfo: GIC242

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 93
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO

• Block Separation:
• Length [mm]: 97
• Number of connectors: 2
• Brake Type: Disc Brake
• Weight [kg]: 0.005
• Name: SW 10 93 9246
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 92.5
• Manufacturer: ATE
• Additional information: 24.8190-0067.2
• Lisainfo: 24.8190-0067.2

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 94
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: BREMBO
• Height [mm]: 96
• Width [mm]: 142
• Thickness [mm]: 18.9
• Wear Warning Contact: prepared for wear indicator

Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package

• Vehicle Equipment: for vehicles with AMG Sports Package
• Fitting Position: Front Axle
• Braking System: for vehicles with sports brake system
• Width [mm]: 141.9
• Height [mm]: 96.2
• Thickness [mm]: 18
• Brake System: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: DENCKERMANN FILTRY

• not for country specific design: USA
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17.3
• Supplementary Article/Supplementary Info: without accessories
• Number of pads: 4
• Test Mark: ECE R90 APPROVED
• Supplementary Article/Info 2: with mounting manual, with bolts/screws
• Manufacturer: TOPRAN HANS PRIES

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact, Change warning contact together with the pads General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• not for SA code: P31, U29
• Vehicle Equipment: for vehicles without sports package
• Quantity per packing unit: 4
• WVA Number: 22047
• Test Mark: E9 90R-02A0841/4136
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 128
• Height 1 [mm]: 92
• Thickness 1 [mm]: 18
• Quality class: PJ
• Name: Brake pads

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with sports package
• Quantity per packing unit: 4
• Thickness [mm]: 18.9
• Width [mm]: 142
• Height [mm]: 96
• Brake System: BREMBO
• Manufacturer: LPR

• Fitting Position: Front Axle
• Braking System: for vehicles with a standard brake system
• Width 1 [mm]: 127.6
• Height 1 [mm]: 92.7
• Thickness 1 [mm]: 18.4
• Brake System: BREMBO
• Warning Contact Length [mm]: 93
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.78
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• for SA code: P31, U29
• Quantity per packing unit: 4
• WVA Number: 22500
• Test Mark: E9 90R-02A0841/4934
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 142
• Height 1 [mm]: 96
• Thickness 1 [mm]: 19
• Quality class: PJ
• Name: Brake pads

Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package

• for brake disc diameter [mm]: 330
• Length [mm]: 175
• Width [mm]: 78, 69
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 19.4
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.904
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 114.3
• Width [mm]: 72.1, 62.2
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.508
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Thickness [mm]: 18.5
• Width [mm]: 127.8
• Height [mm]: 92.6
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 3
• Manufacturer: TOMEX BRAKES

Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: E9 90R-02A0825/4906
• WVA Number: 22792 22793
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 114.3
• Width 2 [mm]: 114.1
• Height 1 [mm]: 71.5
• Height 2 [mm]: 61.7
• Thickness 1 [mm]: 17.2
• Thickness 2 [mm]: 17.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP3359
• Quality class: PJ

• Vehicle Equipment: for vehicles without AMG sports package
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 18.7
• Width [mm]: 127.5
• Height [mm]: 92.1
• Brake System: Brembo
• Manufacturer: OPTIMAL ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Thickness [mm]: 18.9
• Width [mm]: 142
• Height [mm]: 96.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Weight [kg]: 3.25
• Manufacturer: TOMEX BRAKES

Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package

• Fitting Position: Front Axle
• for SA code: P31, U29
• Alternatively:
• Quantity per packing unit: 4
• FMSI Code: D1871-9100
• Test Mark: E9 90R-02A0841/4934
• WVA Number: 22586 22587
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 142
• Width 2 [mm]: 142
• Height 1 [mm]: 96
• Height 2 [mm]: 96
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP3276
• Quality class: PJ

Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Braking System: for vehicles with a standard brake system
• Width [mm]: 114
• Height [mm]: 72.1
• Height 2 [mm]: 62.1
• Thickness [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Fulfils ECE norm: R90
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without sports package
• not for SA code: P31, U29
• Quantity per packing unit: 4
• FMSI Code: D1796-9025
• Test Mark: E9 90R-02A0841/4136
• WVA Number: 22047
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 127.6
• Width 2 [mm]: 127.6
• Height 1 [mm]: 92.2
• Height 2 [mm]: 92.2
• Thickness 1 [mm]: 18.4
• Thickness 2 [mm]: 18.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP3172

• for SA code: P31, U29
• Block Separation:
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Width [mm]: 127.5
• Height [mm]: 93
• Thickness [mm]: 18.8
• Wear Warning Contact: excl. wear warning contact
• Fulfils ECE norm: R90
• Manufacturer: METZGER

Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package

• Fitting Position: Rear Axle
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 22792
• Thickness [mm]: 17.2
• Width [mm]: 114.3
• Height 1 [mm]: 61.7
• Height 2 [mm]: 71.5
• Number of bolts/screws: 4
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 18.2
• Length [mm]: 125.6
• Height [mm]: 92.6
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 22047
• Name: SK VKBP80298
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Article number of recommended accessories: MWI0528
• Width [mm]: 114.2
• Height 1 [mm]: 61.7
• Height 2 [mm]: 71.5
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22792
• Brake System: TRW
• Observe mounting information:
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1.38
• Manufacturer: MINTEX

• Thickness [mm]: 19
• Width [mm]: 127.8
• Wear Warning Contact: prepared for wear indicator
• Vibration: with vibration damper
• Brake System: Brembo
• Height [mm]: 92.7
• Fitting Position: Front Axle
• Weight [kg]: 2.956
• Manufacturer: VAICO
• Additional information: V30-2788 VEMO
• Lisainfo: V30-2788 VEMO

Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for SA code: M274, M20
• Block Separation:
• not for SA code: M013, M014, U29
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Width [mm]: 175.2
• Height 1 [mm]: 69
• Height 2 [mm]: 78
• Thickness [mm]: 19.2
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Wear Warning Contact: prepared for wear indicator
• Fulfils ECE norm: R90
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with sports package
• for SA code: P31, U29
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 18
• Length [mm]: 142
• Height [mm]: 94
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 22500
• Name: SK VKBP80190
• Manufacturer: SKF

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 128
• Thickness [mm]: 19
• Height [mm]: 93
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• Braking System: not for carbon-ceramic brake discs
• WVA Number: 22061
• Manufacturer: BREMBO
• Name: BR P 50 120

Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 114
• Thickness [mm]: 17
• Height [mm]: 62
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22793, 22792
• Manufacturer: BREMBO
• Name: BR P 50 141

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without AMG sports package
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 22047
• Thickness [mm]: 18.1
• Width [mm]: 127.2
• Height [mm]: 92.3
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 114
• Height 1 [mm]: 62.1
• Height 2 [mm]: 72
• Thickness [mm]: 17.6
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0421/0531
• MAPP code available:
• Manufacturer: ATE
• Lisainfo: 13.0460-2626.2
• Additional information: 13.0460-2626.2

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with sports package
• for SA code: P31, U29
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 142
• Height [mm]: 96.3
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R- 02A0107/4610
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 142
• Thickness [mm]: 18
• Height [mm]: 96
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• directional:
• WVA Number: 22586, 22587
• Manufacturer: BREMBO
• Name: BR P 50 139

Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: TRW
• Width [mm]: 114
• Height 1 [mm]: 62
• Height 2 [mm]: 72
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without AMG sports package
• Quantity per packing unit: 4
• Brake System: BREMBO
• Width [mm]: 128
• Height [mm]: 93
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 252-141
• Width [mm]: 114.2
• Height 1 [mm]: 61.7
• Height 2 [mm]: 71.5
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22792
• Brake System: TRW
• Weight [kg]: 1.38
• Technical Information Number: T2748
• Name: HE 8DB355032161
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without sports package
• Quantity per packing unit: 4
• Thickness [mm]: 17, 19
• Test Mark: R90 Homologated
• Width [mm]: 127
• Height [mm]: 95
• Weight [kg]: 2.8
• Height 1 [mm]: 95
• Wear Warning Contact: not prepared for wear indicator
• Brake System: Brembo
• Packing Type: Box
• WVA Number: 22047, 22061
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• Manufacturer: JURID

• Vehicle Equipment: for vehicles without AMG sports package
• Fitting Position: Front Axle
• Braking System: for vehicles without sports brake system
• Width [mm]: 127.5
• Height [mm]: 92.1
• Thickness [mm]: 18.7
• Brake System: Brembo
• Test Mark: E1 90R-02A0334/0126
• MAPP code available:
• Manufacturer: ATE
• Lisainfo: 13.0460-4883.2
• Additional information: 13.0460-4883.2

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Vehicle Equipment: for vehicles with AMG Sports Package
• Fitting Position: Front Axle
• Braking System: for vehicles with sports brake system
• Width [mm]: 141.9
• Height [mm]: 96.2
• Thickness [mm]: 18
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Brembo
• Test Mark: E1 90R-02A0365/0465
• MAPP code available:
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 252-141
• Width [mm]: 127.6
• Height [mm]: 92.6
• Thickness [mm]: 18.9
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 22061
• Brake System: Brembo
• Weight [kg]: 2.8
• Technical Information Number: T2378
• Name: HE 8DB355021671
• Manufacturer: HELLA PAGID

Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package

• Fitting Position: Rear Axle
• Width [mm]: 114
• Height 1 [mm]: 62.1
• Height 2 [mm]: 72
• Thickness [mm]: 17.6
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0573/0534
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Vehicle Equipment: for vehicles without AMG sports package
• Fitting Position: Front Axle
• Braking System: for vehicles without sports brake system
• Width [mm]: 127.5
• Height [mm]: 92.1
• Thickness [mm]: 18.7
• Brake System: Brembo
• Test Mark: E1 90R-02A0258/0127
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Vehicle Equipment: for vehicles with AMG Sports Package
• Fitting Position: Front Axle
• Braking System: for vehicles with sports brake system
• Width [mm]: 141.9
• Height [mm]: 96.2
• Thickness [mm]: 18
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Brembo
• Test Mark: E1 90R-02A0479/0481
• MAPP code available:
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 252-141
• Width [mm]: 142
• Height [mm]: 96
• Thickness [mm]: 18.9
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 22586
• Brake System: Brembo
• Weight [kg]: 2.9
• Technical Information Number: T2556
• Name: HE 8DB355031701
• Manufacturer: HELLA PAGID

Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package