Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
rear -
Additional information: Rubber mount for wishbone,
rear
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear - Manufacturer: JP GROUP
- Lisainfo: Rubber mount for rear axle beam
- Additional information: Rubber mount for rear axle beam
- Fitting Position: Rear Axle
- Weight [kg]: 0.116
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
-
Name: KINNITUS,
SILLATALA - Manufacturer: MAX
- Fitting Position: Rear
-
Material: Rubber/
Metal - Weight [g]: 105
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 47
- Length [mm]: 30
- Name: IM 31889
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 7
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
-
Fitting Position: Rear Axle,
Centre -
Mounting Type: Rubber-
Metal Mount - SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 30
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
General Information: MEYLE recomments to use the reinforced version (HD)
- Mounting Type: Hydro Mount
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: MAX
Fitting Position: Front, outer, Lower, Rear Axle Left, Rear Axle Right
-
Fitting Position: Centre,
Front, Rear Axle - Height [mm]: 18
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 64
- Required quantity: 1
- Outer Diameter 1 [mm]: 57
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
- Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Weight [kg]: 0.297
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 38
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Required quantity: 2
- reinforced version:
- Replace in pairs only:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
-
Fitting Position: Rear Axle,
Front -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829045810
- Mounting Type: Hydro Mount
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: LMI
Fitting Position: Rear Axle Left, Rear Axle Right, Front, outer, Lower SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front - Mounting Type: Rubber Mount
- Height [mm]: 57
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 66,
80 - Required quantity: 1
- Manufacturer Restriction: Hinterachsträger
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
-
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
-
Name: REMONDIKOMPLEKT,
KNDMIK - Manufacturer: MAX
-
Name: Paigutus -
Kndmik DB T. W124 TY (DU½A) - Manufacturer: LMI
Fitting Position: Rear Axle Left, Rear Axle Right, Lower, outer, Rear SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
-
Name: REMONDIKOMPLEKT,
SILLATALA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks