• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Thread Size: M14 x 1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 4
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Length [mm]: 52
• External Thread [mm]: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Switch Point [°C]: 120
• Colour Coding: black
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Length [mm]: 52
• Housing Colour: black
• Spanner Size: 19
• Manufacturer: KAMOKA

• Length [mm]: 52
• Spanner Size: 19
• Colour Coding: black
• Number of pins: 1
• Thread Size: M14x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Spanner Size: 19
• for OE number: A0085424517
• Manufacturer: KAMOKA

• Spanner Size: 19
• Number of pins: 2
• Thread Size: M14x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Number of pins: 1
• Colour: black
• Thread Size: M14x1,5 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 005 542 10 17, 6615423017, 2D0 919 501 C
• Manufacturer: MEAT&DORIA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 2D0919501C
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour Coding: black
• Switch Point [°C]: 120
• Weight [kg]: 0.034
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour Coding: black
• Switch Point [°C]: 120
• Weight [kg]: 0.034
• Manufacturer: SWAG
• Name: SW 99 90 8668

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Manufacturer: ERA

• Thread Size: M 14x1,5
• Plug Type: Round Plug
• Manufacturer: FAE

• Engine Code: M 104.980
• Number of pins: 1
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

Manufacturer: FAST

• Length [mm]: 90
• Width [mm]: 36
• Height [mm]: 21
• Weight [kg]: 0.016
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14x1.5
• Number of connectors: 1
• Plug Type: Round Plug
• Manufacturer: VERNET

• External Thread Size: M14 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.15
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M14x1.5
• for OE number: 0085423217
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 628, 70
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M14x1,5
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 104.980
• Housing Colour: black
• Number of pins: 4
• Thread Size: M14X1.5-6g
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Name: Andur,Olisurve
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY
• Lisainfo: 0140540035
• Additional information: 0140540035

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: M 104.980
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Name: EP 1.830.139
• Manufacturer: EPS

• Engine Code: M 104.980
• Number of pins: 4
• Keermemõõt: M14x1,5
• Võtmekaugus: 22
• Name: EP 1.830.151
• Manufacturer: EPS

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 350
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Weight [kg]: 0.05
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14x1,5
• Colour: blue
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• valikuliselt:
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 24
• alternatiivne remondikomplekt: 550369
• Takistus [koom]: 1,1
• Manufacturer: ERA

• Number of pins: 2
• Connector Shape: round
• Plug Type: Round Connector Sleeve
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 24
• Number of mounting bores: 2
• Manufacturer: MEAT&DORIA

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 4,700, 560
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M14x1,5
• Colour: blue
• Sensor Type: NTC Sensor
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Corresponds to the original part in colour: light blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 104.980
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SS10936

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Length [mm]: 52.3
• Width [mm]: 57
• Number of connectors: 2
• Hole Spacing [mm]: 38
• Weight [kg]: 0.039
• Name: SW 10 93 2421
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52.3
• Width [mm]: 57
• Number of connectors: 2
• Hole Spacing [mm]: 38
• Weight [kg]: 0.039
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 104.980
• Connector Shape: round
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: B 091699, F 124697
• Block Separation:
• Pistikkontaktide arv: 2
• Manufacturer: METZGER

• Kaablipikkus (mm): 1 270
• Pistikkontaktide arv: 2
• Pistikute teostus: Ümarpistik
• Kaal (kg): 0,12
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV526

• Lambda Sensor: Regulating Probe, Planar probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Length [mm]: 60
• Switch point to [bar]: 3
• Outer Diameter [mm]: 39.5, 45.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 17
• Number of connectors: 1
• Weight [kg]: 0.12
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PU009121081

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 60
• Switch point to [bar]: 3
• Outer Diameter [mm]: 39.5, 45.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 17
• Number of connectors: 1
• Weight [kg]: 0.12
• Name: SW 10 23 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 12x1,5
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M 104.980
• Cable Length [mm]: 755
• Manufacturer: DELPHI
• Name: DE ES10276-12B1

• Number of pins: 2
• Connector Shape: round
• Cable Length [mm]: 1,340
• Sensor Type: Inductive Sensor
• Manufacturer: MEAT&DORIA

• Length [mm]: 1,385, 40
• Outer Diameter [mm]: 14.61
• Number of connectors: 2
• Cable Length [mm]: 1,293
• Weight [kg]: 0.105
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 1,385, 40
• Outer Diameter [mm]: 14.61
• Number of connectors: 2
• Cable Length [mm]: 1,293
• Weight [kg]: 0.105
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Voltage [V]: 12
• Resistor [Ohm]: 830
• Tolerance [%]: 10
• Cable Length [mm]: 1,340
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Plug Type: Round Plug
• Fitting Position: Flywheel side
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009110441
• Manufacturer: HELLA

SVHC: 96-45-7; Imidazolidine-2-thione; (2-imidazoline-2-thiol), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 780
• Available as universal article as well, see article no.: 0258986504
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH