Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Laius (mm): 23
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 69
- Manufacturer: CAFFARO ROLKI NAPINACZY
- Name: CA 500360
- Laius (mm): 25
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 70
- Manufacturer: CAFFARO ROLKI NAPINACZY
- Driven Units: Alternator
-
Engine Number to: 21004,
4956 - Block Separation:
- Supplementary Article/Supplementary Info: without accessories
- Width [mm]: 26
- Outer Diameter [mm]: 70
- Manufacturer: KAMOKA
- Laius (mm): 23
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 64
-
Name: CA 80-
12 - Manufacturer: CAFFARO
- Laius (mm): 25
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 70
-
Seerianumber: RNK-
ME- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Laius (mm): 25
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 70
- Manufacturer: CAFFARO ROLKI NAPINACZY
- Driven Units: Alternator
- Catalytic Converter Type: for vehicles with catalytic converter
- Diameter [mm]: 64
- Width [mm]: 22
- Weight [kg]: 0.241
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Laius (mm): 26,
31, 5 -
Kaal (kg): 0,
24 - vajaminev tükihulk: 1
- Materjal: Metall
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 75
- Kaal (g): 240
- Manufacturer: METALCAUCHO
-
Seerianumber: RNK-
ME- 073 - Välisläbimõõt [mm]: 70
- Siseläbimõõt [mm]: 8
- Laius (mm): 22
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Laius (mm): 22
- Materjal: Plastik
- Siseläbimõõt [mm]: 8
- Välisläbimõõt [mm]: 70
- Manufacturer: CAFFARO ROLKI NAPINACZY
-
Name: CA 140-
22
- Width of castor bearing surface [mm]: 21.5
- Width [mm]: 31.5
- Outer Diameter [mm]: 64
- Number of grooves: 6
- Material: Plastic
- Weight [kg]: 0.195
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 64
- Inner Diameter [mm]: 26
- Material: Plastic
- Width [mm]: 32
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: MAX
- for OE number: 601 200 1070
- Diameter [mm]: 64
- Width [mm]: 21.8
- Number of ribs: 6
- Manufacturer: TRUCKTEC
- Width of castor bearing surface [mm]: 21.5
-
Width [mm]: 21.8,
31.5 - Outer Diameter [mm]: 64
- Number of grooves: 6
- Material: Plastic
- Weight [kg]: 0.195
- Name: SW 10 03 0004
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width 1 [mm]: 26
- Outer Diameter 1 [mm]: 69
- Manufacturer: SNR
- Name: SN GA351.01
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 25
- Material: Plastic
- Width [mm]: 32
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: MAX
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Material: Plastic
- Width [mm]: 25
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: MAX
- Lisainfo: 55124MG
- Additional information: 55124MG
- Outer Diameter [mm]: 70
- Vehicle Equipment: for vehicles without power steering
- Height [mm]: 26
- Inner Diameter [mm]: 8
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: MEY
- Driven Units: Alternator
-
Engine Number to: 4956,
21004 - Block Separation:
- Diameter [mm]: 70
- Width [mm]: 26
- Number of grooves: 6
- SVHC: No SVHC present!
-
Name: PINGUTUSRULL,
SOONRIHM - Manufacturer: INA
- Width 1 [mm]: 26
- Outer Diameter 1 [mm]: 75
- Manufacturer: SNR
- Name: SN GA351.05
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Width [mm]: 25
- Material: Plastic
-
Name: Seade-
/ juhtrull, soonrihm - Manufacturer: MAX
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Width [mm]: 25
- Material: Plastic
-
Name: Pingutusrull,
soonrihm - Manufacturer: MAX
-
Engine Number to: 000057,
000070 -
Transmission Type: Automatic Transmission,
Manual Transmission - Vehicle Equipment: for vehicles without air conditioning
- Block Separation:
- Width of castor bearing surface [mm]: 31.5
- Width [mm]: 26
- Outer Diameter [mm]: 70
- Material: Plastic
- Number of ribs: 6
- Weight [kg]: 0.221
-
Name: SEADE-
/ JUHTRULL, SOONRIHM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Number to: 000057,
000070 -
Transmission Type: Automatic Transmission,
Manual Transmission - Vehicle Equipment: for vehicles without air conditioning
- Block Separation:
- Width of castor bearing surface [mm]: 31.5
- Width [mm]: 26
- Outer Diameter [mm]: 75
- Material: Plastic
- Number of ribs: 6
- Weight [kg]: 0.24
- Name: SW 10 03 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Trim Level: IDLER
- Belt Pulley Ø [mm]: 70
- Height 1 [mm]: 26.4
- Height 2 [mm]: 31.5
- Weight [kg]: 0.3
- Name: DA APV2112
- Manufacturer: DAYCO
- Driven Units: Radiator fan
- Vehicle Equipment: for vehicles with electric secondary air pump
- Supplementary Article/Info 2: with grooves
- Material: Plastic
- Number of grooves: 6
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 8
- Width [mm]: 26
- Manufacturer: GATES PASKI PRZEWODY
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks