Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Diameter 4 [mm]: 18
- Mounting Type: Rubber Mount
- for OE number: 124 323 49 85
-
Fitting Position: outer,
Front Axle both sides - Inner Diameter [mm]: 18
- Weight [kg]: 0.051
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18.5
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 15
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
rear, ®15 mm -
Additional information: Grommet for stabilizer,
rear, ®15 mm
- Length [mm]: 85
- Width [mm]: 31
- Height [mm]: 28
- Mounting points diameter [mm]: 9
- Fitting Position: Front Axle
- Weight [kg]: 0.061
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 25
- Width [mm]: 28
- Thickness [mm]: 31
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 25
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.017
- Manufacturer: SWAG
- Name: SW 10 10 8170
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 25
- Width [mm]: 28
- Thickness [mm]: 31
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 25
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.017
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: inner,
outer, Front Axle - Required quantity: 4
- Inner Diameter [mm]: 15
- Manufacturer: TEDGUM
- Name: TG 00413002
-
Fitting Position: Front Axle Right,
Front, inner - Manufacturer: JP GROUP
-
Lisainfo: Bracket,
stabilizer mounting, right -
Additional information: Bracket,
stabilizer mounting, right
-
Fitting Position: Front Axle Left,
Front, inner -
Lisainfo: Bracket,
stabilizer mounting, left -
Additional information: Bracket,
stabilizer mounting, left
-
Fitting Position: Front Axle,
inner - Diameter [mm]: 24
- Required quantity: 2
- Manufacturer: TEDGUM
-
Fitting Position: inner,
Front - Required quantity: 2
-
Material: Rubber,
Rubber with fabric lining - Weight [g]: 55
- Inner Diameter [mm]: 28
- Name: IM 35806
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- paired article number: VKDS 458007
- Inner Diameter [mm]: 15.5
- Name: SK VKDS458007
- Manufacturer: SKF
- Construction Year to: 08.1989
- Block Separation:
- Suspension: for vehicles without sports suspension
- Construction Year from: 09.1989
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 22
- Outer Diameter 1 [mm]: 47
- Outer Diameter 2 [mm]: 40
- Height [mm]: 38
- Required quantity: 2
-
Name: Paigutus -
Kndmik DB P. W124/ 201/ 202 - Manufacturer: MEY
- Material: Rubber
-
Fitting Position: Front Axle,
outer, inner - Name:
- Manufacturer: TED
-
Fitting Position: inner,
Front, Front Axle Left - paired article number: 014 032 0059
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: MEY
-
Fitting Position: inner,
Front, Front Axle Right - Required quantity: 1
- paired article number: 014 032 0058
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: MEY
- Fitting Position: Front Axle both sides
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle,
both sides - SVHC: No SVHC present!
- Manufacturer: FAG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks