Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
rear -
Additional information: Rubber mount for wishbone,
rear
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear - Manufacturer: JP GROUP
- Lisainfo: Rubber mount for rear axle beam
- Additional information: Rubber mount for rear axle beam
- Construction Year from: 01.1989
- Special Purpose Vehicle: not for taxis
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front - Quantity Unit: Set
- Manufacturer: JP GROUP
- Lisainfo: Rubber mount for rear axle beam
- Additional information: Rubber mount for rear axle beam
- Fitting Position: Rear Axle
- Weight [kg]: 0.116
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
-
Name: KINNITUS,
SILLATALA - Manufacturer: MAX
- Construction Year from: 01.1989
- Fitting Position: Rear
-
Material: Rubber/
Metal - Weight [g]: 105
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 47
- Length [mm]: 30
- Name: IM 31889
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 7
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Thickness [mm]: 7
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
-
Mounting Type: Rubber-
Metal Mount -
Name: KINNITUS,
SILLATALA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 30
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
General Information: MEYLE recomments to use the reinforced version (HD)
- Mounting Type: Hydro Mount
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: MAX
Fitting Position: Front, outer, Lower, Rear Axle Left, Rear Axle Right
-
Fitting Position: Centre,
Front, Rear Axle - Height [mm]: 18
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 64
- Required quantity: 1
- Outer Diameter 1 [mm]: 57
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear - Lisainfo: Rubber mount for rear axle beam
- Additional information: Rubber mount for rear axle beam
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Suspension frame bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MB W201/ W202/ W124
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
MB W201/ W202/ W124
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Weight [kg]: 0.297
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 38
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Required quantity: 2
- reinforced version:
- Replace in pairs only:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
-
Fitting Position: Rear Axle,
Front - Width 1 [mm]: 57
- Outer Diameter 1 [mm]: 80
- Manufacturer: DELPHI
- Construction Year from: 01.1989
- Special Purpose Vehicle: not for taxis
- Width [mm]: 58
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Front, Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.254
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1243511942
- Fitting Position: Rear
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 225
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
- Name: IM 31814
- Manufacturer: ORIGINAL IMPERIUM
- Construction Year from: 01.1989
- Special Purpose Vehicle: not for taxis
- Width [mm]: 58
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Front, Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.254
- Name: SW 10 79 0018
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829045810
- Construction Year to: 12.1988
- Block Separation:
- Special Purpose Vehicle: not for taxis
- Construction Year from: 01.1989
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front - Height [mm]: 16
- Inner Diameter [mm]: 58
- Outer Diameter [mm]: 61
- Required quantity: 2
- reinforced version:
- Replace in pairs only:
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- Mounting Type: Hydro Mount
-
Name: Paigutus -
Kndmik DB T. W124/ 201/ - Manufacturer: LMI
Fitting Position: Rear Axle Left, Rear Axle Right, Front, outer, Lower SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front - Mounting Type: Rubber Mount
- Height [mm]: 57
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 66,
80 - Required quantity: 1
- Manufacturer Restriction: Hinterachsträger
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Height [mm]: 69
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 83
- Required quantity: 2
- replacement in pairs recommended:
-
Name: KINNITUS,
SILLATALA - Manufacturer: MEY
-
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
-
Name: REMONDIKOMPLEKT,
KNDMIK - Manufacturer: MAX
-
Name: Paigutus -
Kndmik DB T. W124 TY (DU½A) - Manufacturer: LMI
Fitting Position: Rear Axle Left, Rear Axle Right, Lower, outer, Rear SVHC: No information available, please contact the manufacturer!
- Construction Year from: 01.1989
- Special Purpose Vehicle: not for taxis
- Width [mm]: 58
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
- Weight [kg]: 0.74
- Supplementary Article/Info 2: with screw set
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1989
- Special Purpose Vehicle: not for taxis
- Width [mm]: 58
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 61
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
- Weight [kg]: 0.74
- Supplementary Article/Info 2: with screw set
-
Name: REMONDIKOMPLEKT,
SILLATALA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1988
- Block Separation:
- Special Purpose Vehicle: not for taxis
- Construction Year from: 01.1989
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front - Supplementary Article/Supplementary Info: with accessories
- replacement in pairs recommended:
- Required quantity: 2
-
Name: REMONDIKOMPLEKT,
SILLATALA - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- for OE number: A1243506408
-
Fitting Position: Rear Axle,
Left, Right, Front - Required quantity: 1
- Weight [g]: 877
- Name: IM 35732
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle,
Front - Mounting Type: Hydro Mount
-
Name: REMONDIKOMPLEKT,
SILLATALA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!