• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature, 2 pins
• Additional information: Sender for water temperature, 2 pins

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Manufacturer: JP GROUP
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Housing Colour: black
• Manufacturer: KAMOKA

• Fabrication Number: ECT-ME-002
• Manufacturer: NTY
• Name: NTY ECT-ME-002

• Spanner Size: 19
• for OE number: K05103534AA
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Colour Coding: black
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0292
• Additional information: 21-0292

• for OE number: 099 905 3800
• Manufacturer: TRUCKTEC

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

Manufacturer: FAST

• Engine Code: OM 612.981
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Fitting Position: Suction Pipe
• Vehicle Identification Number (VIN) from: R337627
• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECP-ME-001
• Manufacturer: NTY

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020
• Manufacturer: NTY

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-027
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Manufacturer: ERA

Manufacturer: FAST

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Name: CE 17SKV682
• Manufacturer: ESEN SKV

• Cable Length [mm]: 470
• Sensor Type: Passive sensor
• for OE number: 46437264
• Manufacturer: KAMOKA

• Height [mm]: 86.2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Passive sensor
• for OE number: 05080352AA
• Manufacturer: KAMOKA

• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 003 153 27 28
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: OM 612.981
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• for OE number: 099 905 38 00
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M14 x 1,5
• Manufacturer: ERA

• Height [mm]: 50.6
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 51
• Fabrication Number: ECP-CH-019
• Manufacturer: NTY

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358058181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• for OE number: 099 905 38 00
• Name: SW 10 93 4074
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAE

• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966431

• Fabrication Number: ESS-ME-000
• Manufacturer: NTY

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10269

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 3
• Colour: black
• Warranty: 3 years warranty
• Name: CE 17SKV834
• Manufacturer: ESEN SKV

• Required quantity: 1
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 0031532728
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV330

• Sensor Type: Active sensor
• for OE number: 05080346AA
• Manufacturer: KAMOKA

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Manufacturer: NTY

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Engine Code: OM 612.981
• Name: EP 1.953.578
• Manufacturer: EPS

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: grey
• Number of mounting bores: 1
• Manufacturer: FAST

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,080
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Sensor Type: Inductive Sensor
• Number of pins: 2

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: OM 612.981
• Required quantity: 1
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

• Height [mm]: 24.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Name: SW 10 92 4455
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 612.981
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 51
• Number of connectors: 3
• Weight [kg]: 0.035
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Manufacturer: FAST

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Alternative Repair Kit: 550509
• Resistor [kOhm]: 145
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAE

• Length [mm]: 51
• Number of connectors: 3
• Weight [kg]: 0.035
• Name: SW 10 93 2317
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 24.3
• for article number: 87435E
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Construction Year to: 02.2006
• Engine Code: 612.981
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253825
• Additional information: VAL253825

• Number of pins: 3
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Required quantity: 1
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: grey
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 003 153 27 28
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Voltage [V]: 12
• Number of pins: 5
• Fabrication Number: EPP-ME-014

• Construction Year to: 02.2006
• Engine Code: 612.981
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 254008