Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 06.2000
- Fitting Position: Left
-
for OE number: 0005409017,
0005407517 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 815
- Number of pins: 4
- Weight [g]: 117
- Gross Weight [g]: 147
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA S (W140), 02.9
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA S (W140), 02.9
(kvaliteediklass: Q)"
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Construction Year from: 03.1997
-
Construction Year to: 06.2000,
01.2003 -
Lambda Sensor: Regulating Probe,
Finger probe -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Block Separation:
-
Emission Standard: Euro 3
(D3), D4 - Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
505 -
Additional information: MGS-
505
Fitting Position: Left, Right, after catalytic converter, before catalytic converter
- Construction Year from: 07.2000
- Construction Year to: 01.2003
-
Lambda Sensor: Regulating Probe,
Heated - Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: after catalytic converter, Left, Right, before catalytic converter
-
Lambda Sensor: Diagnostic Probe,
Regulating Probe - Construction Year from: 03.1997
- Construction Year to: 01.2003
- Voltage [V]: 12
- Length [mm]: 480
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV057
Exhaust System: after catalytic converter, before catalytic converter
- Construction Year to: 06.2000
- Fitting Position: Left
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
- Construction Year from: 03.1997
- Fitting Position: Right
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Cable Length [mm]: 630
- Manufacturer: DELPHI
-
Name: DE ES10580-
12B1
- Construction Year to: 06.2000
-
Fitting Position: both sides,
after catalytic converter - Vehicle Identification Number (VIN) to: B173999
- Cable Length [mm]: 380
-
Lambda Sensor: Finger probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES10632-
12B1
- Engine Code: M 112.921
- Fitting Position: Left Front
-
Emission Standard: Euro 3
(D3) -
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: round
- Length [mm]: 515
-
Thread Size: M18 x 1,
5 - Conductor Number: 4
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0.132
-
Lambda Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: B 173999,
X 044900 - for OE number: 0003122V005
- Lambda Sensor: Heated
-
External Thread [mm]: M18 x 1,
5 - Number of circuits: 4
- Manufacturer: TRUCKTEC
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 07.1999
- Construction Year to: 01.2003
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Length [mm]: 830
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV031
- Manufacturer: ESEN SKV
- Resistor [Ohm]: 9
- Length [mm]: 900
- Conductor Number: 4
- Number of circuits: 4
- Cable Length [mm]: 900
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Engine Code: M 112.921
- Required quantity: 2
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 07.1999
- Fitting Position: Left
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Emission Standard: Euro 2
- Cable Length [mm]: 585
- Manufacturer: DELPHI
-
Name: DE ES20346-
12B1
- Construction Year from: 06.2000
-
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Block Separation:
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Cable Length [mm]: 919
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Fitting Position: Right Front, before catalytic converter, Left Front
- Construction Year from: 06.2000
- Vehicle Identification Number (VIN) from: B040000
- Quantity: 2
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 07.2000
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Construction Year from: 06.2000
- Fitting Position: Left
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year from: 07.2000
- Construction Year to: 01.2003
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Left -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Emission Standard: Euro 2
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 03.1997
-
Construction Year to: 06.2000,
01.2003 - Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Left -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Emission Standard: Euro 2,
Euro 3 (D3), D4 - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986505
- Construction Year from: 06.2000
-
Fitting Position: Left Front,
before catalytic converter -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Cable Length [mm]: 470
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
- Lambda Sensor: Regulating Probe
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Exhaust System: before catalytic converter
- Fitting Position: Left Front
- Construction Year from: 06.2000
- Length [mm]: 470
- Number of connectors: 4
- Manufacturer: VERNET
- Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) from: B040000,
X037890 - Lambda Sensor: Planar probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 320
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
- Construction Year from: 06.2000
- Fitting Position: Left
-
for OE number: 0005408517,
15400717 -
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 900
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 136
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"
- Construction Year from: 03.1997
- Construction Year to: 01.2003
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Right -
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Number of circuits: 4
- Overall Length [mm]: 770
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Construction Year from: 03.1997
- Construction Year to: 06.2000
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Right, Left - Number of circuits: 4
- Overall Length [mm]: 580
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Construction Year from: 03.1997
- Construction Year to: 06.2000
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 347
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Construction Year from: 07.2000
- Construction Year to: 01.2003
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 340
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 07.2000
- Construction Year to: 01.2003
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Right, Left - Number of circuits: 4
- Overall Length [mm]: 580
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks