• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Fabrication Number: ECT-ME-002
• Manufacturer: NTY
• Name: NTY ECT-ME-002

• Spanner Size: 19
• for OE number: K05103534AA
• Manufacturer: KAMOKA

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY
• Name: CE 17SKV699

• Fitting Depth [mm]: 30
• Number of pins: 2
• Colour: black
• Fabrication Number: ECT-ME-000
• Manufacturer: NTY
• Name: NTY ECT-ME-000

• Length [mm]: 90
• Voltage [V]: 12
• Manufacturer: KAMOKA

• Spanner Size: 19
• Number of pins: 2
• Thread Size: M14 x 1,5
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: MAX

• Housing material: Plastic
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX

• Length [mm]: 86.7
• Sensor Type: Passive sensor
• Number of pins: 2
• Combi Switch Function: Reed Contact
• Plug Type: Round Plug
• Weight [kg]: 0.01
• Operating voltage [V]: 12
• Warranty: 3 years warranty
• Name: CE 17SKV645
• Manufacturer: ESEN SKV

• Length [mm]: 90
• Voltage [V]: 12
• Number of pins: 2
• Name: Andur,Jahutusvedelikutase
• Manufacturer: MAX

• Connector Shape: oval
• Sensor Type: NTC Sensor
• Number of pins: 2
• Thread Pitch [mm]: 1.5
• Thread Size: M 14
• Colour Coding: black
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.012
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 0005426218
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

• for OE number: 007 542 1318
• Number of connectors: 2
• Manufacturer: TRUCKTEC

• Length [mm]: 90
• Width [mm]: 36
• Height [mm]: 21
• Weight [kg]: 0.016
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Plug Type: Round Plug
• Housing material: Plastic
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 193
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 90
• Width [mm]: 35
• Thickness [mm]: 22
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN
• Additional information: FE21751
• Lisainfo: FE21751

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M14 x 1,5
• Manufacturer: ERA

• Height [mm]: 50.6
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Weight [kg]: 0.002
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1.5
• Number of connectors: 2
• Manufacturer: VERNET

• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Name: CE 17SKV642
• Manufacturer: ESEN SKV

• Engine Code: M 111.974
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Length [mm]: 86.7
• Plug Type: Round Plug
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: MEY

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV288
• Manufacturer: ESEN SKV

• Number of connectors: 2
• Weight [kg]: 0.044
• for OE number: 210 540 00 45
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.044
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Manufacturer: SWAG
• Name: SW 10 93 7059

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Combi Switch Function: Normally Open Contact
• Supplementary Article/Info 2: Heated washer fluid reservoir
• Number of pins: 2
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: MEY

• Number of connectors: 2
• Weight [kg]: 0.002
• Manufacturer: SWAG
• Name: SW 10 92 6086

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.002
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Power [W]: 0.06
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: FAE

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,080
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Thread Size: M12 x 1,5
• Switch point from [bar]: 0
• Switch point to [bar]: 3
• Weight [kg]: 0.103
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: FAST

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Length [mm]: 70
• Width [mm]: 32
• Thickness [mm]: 18
• Number of connectors: 2
• Weight [kg]: 0.031
• Name: SW 10 93 0689
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

• Voltage [V]: 12
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Plug Type: Round Plug
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Product must be determined on the vehicle or the motor:
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Thread Size: M14x1,5
• Colour: blue
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 1
• Manufacturer: VERNET

• Number of pins: 1
• Fitting Depth [mm]: 12
• Plug Type: Round Plug
• Number of mounting bores: 2
• Fabrication Number: EPO-ME-000
• Manufacturer: NTY

• Weight [kg]: 0.049
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Depth [mm]: 40
• Resistance [Ohm]: 1,150
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Voltage [V]: 12
• Number of pins: 1
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: M 111.974
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

Manufacturer: FAE

• Number of pins: 1
• Plug Type: Round Plug
• Connector Shape: round
• Number of mounting bores: 2
• Fitting Depth [mm]: 12
• for OE number: A 124 542 00 17
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.1997
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS