• Fitting Position: Rear Axle
• Inner Diameter [mm]: 92
• Width [mm]: 11
• Outer Diameter [mm]: 96
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: MERCEDES
• Additional information: MERCEDES

• Fitting Position: Rear Axle both sides
• Width [mm]: 11
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 92
• Outer Diameter [mm]: 96
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Rear Axle both sides
• Inner Diameter [mm]: 92
• Outer Diameter [mm]: 96
• Material: Steel
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0307
• Additional information: 27-0307

• Inner Diameter [mm]: 92
• Outer Diameter [mm]: 96
• Material: Steel
• Number of Teeth, ABS ring: 48
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.03
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 96
• Outer Diameter [mm]: 92
• Number of Teeth, ABS ring: 48
• Material: Steel
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.03
• Name: SW 10 10 0505
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-ME-003
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-ME-044
• Number of pins: 2

• Vehicle Identification Number (VIN) to: F 980773
• Fitting Position: Rear Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Length [mm]: 390
• Manufacturer: DENCKERMANN FILTRY

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Active sensor
• Required quantity: 1
• Cable Length [mm]: 520
• Number of pins: 2
• Fitting Position: Front Axle Right
• paired article number: 20-0461
• Name: CZUJNIK ABS DB P. W202 PR
• Manufacturer: MAX

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Active sensor
• Required quantity: 1
• Cable Length [mm]: 570
• Number of pins: 2
• Fitting Position: Front Axle Left
• paired article number: 20-0462
• Name: CZUJNIK ABS DB P. W202 LE
• Manufacturer: MAX

• Fitting Position: Front Axle Left
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 550
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Right
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 550
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Braking/Drive Dynamics: for vehicles with ESP
• Fitting Position: Front Axle Right
• Sensor Type: Hall Sensor
• Manufacturer Restriction: Teves
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Braking/Drive Dynamics: for vehicles with ESP
• Fitting Position: Front Axle Left
• Sensor Type: Hall Sensor
• Manufacturer Restriction: Teves
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle Left
• Braking/Drive Dynamics: for vehicles without ESP
• Length [mm]: 503
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Right
• Braking/Drive Dynamics: for vehicles without ESP
• Sensor Type: Passive sensor
• Length [mm]: 503
• Socket colour: black

• Fitting Position: Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 958
• Socket colour: black
• Braking/Drive Dynamics: for vehicles with ASR

• Braking/Drive Dynamics: for vehicles with ASR
• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 650
• Socket colour: black

• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 503
• Socket colour: black

• Fitting Position: Rear
• Length [mm]: 415
• Number of pins: 2
• Plug Type: Male
• Voltage [V]: 12
• Weight [kg]: 0.1
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV065

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 430
• Socket colour: black
• Braking/Drive Dynamics: for vehicles without ASR

• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-ME-004
• paired article number: HCA-ME-005

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-ME-005
• paired article number: HCA-ME-004
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Vehicle Identification Number (VIN) from: F331441->F894083
• for model code: (+) ASR, (+) ETS
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 690
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front Axle Left
• Vehicle Identification Number (VIN) to: F894083
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 575
• Manufacturer: DELPHI
• Name: DE SS20492

• Fitting Position: Front Axle Right
• Vehicle Identification Number (VIN) to: F894083
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 575
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear
• Length [mm]: 990
• Number of pins: 2
• Plug Type: Female
• Voltage [V]: 12
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Socket colour: black
• Name: CE 06SKV299
• Manufacturer: ESEN SKV

• Fitting Position: Front
• Length [mm]: 530
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV137

• Fitting Position: Rear Axle, Left, Rear Axle Left
• Braking/Drive Dynamics: for vehicles with ASR, for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.07
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Left, Front Axle Left
• Braking/Drive Dynamics: for vehicles with ESP, for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.058
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left
• Braking/Drive Dynamics: for vehicles with ASR
• Cable Length [mm]: 634
• Sensor Type: Passive sensor
• paired article number: 06-S263
• Manufacturer: OPTIMAL ZAWIESZENIE

• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Position: Front Axle Right
• Cable Length [mm]: 520
• Sensor Type: Passive sensor
• paired article number: 06-S260
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front
• Length [mm]: 56
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 06SKV136
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Brakes-/Drive Dynamics Articles: not for ASR
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 500
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle Left
• Required quantity: 1
• Cable Length [mm]: 517
• Fitting Depth [mm]: 25
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 517
• Fitting Depth [mm]: 25
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Manufacturer Restriction: ATE
• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Active sensor
• Cable Length [mm]: 520
• Number of pins: 2
• Fitting Position: Front Axle Right
• paired article number: 014 800 0100
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front Axle, Front Axle Right
• Braking/Drive Dynamics: for vehicles with ESP
• Vehicle Identification Number (VIN) from: F894084
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 588
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ASR
• Cable Length [mm]: 979
• Sensor Type: Passive sensor
• paired article number: 06-S262
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle, Front Axle Left
• Braking/Drive Dynamics: for vehicles with ESP
• Vehicle Identification Number (VIN) from: F894084
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 517
• Manufacturer: DELPHI
• Name: DE SS20321

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: F331441->F894083
• for model code: (+) ASR, (+) ETS
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Active sensor
• Cable Length [mm]: 570
• Number of pins: 2
• Fitting Position: Front Axle Left
• paired article number: 014 800 0101
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: F 980774
• Braking/Drive Dynamics: for vehicles with ESP
• Number of pins: 2
• Cable Length [mm]: 938
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Vehicle Identification Number (VIN) to: F 980773
• Fitting Position: Rear Axle Left
• Braking/Drive Dynamics: for vehicles with ASR
• Length [mm]: 621
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Braking/Drive Dynamics: for vehicles with ESP
• Length [mm]: 549
• MAPP code available:
• Manufacturer: ATE

• Vehicle Identification Number (VIN) to: F 980773
• Fitting Position: Rear Axle Left
• Braking/Drive Dynamics: for vehicles with ESP
• Length [mm]: 632
• MAPP code available:
• Manufacturer: ATE

• Vehicle Identification Number (VIN) from: F 980774
• Fitting Position: Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ASR
• Length [mm]: 958
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• Braking/Drive Dynamics: for vehicles with ESP
• Length [mm]: 549
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Braking/Drive Dynamics: for vehicles without ESP
• Length [mm]: 503
• MAPP code available:
• Manufacturer: ATE