Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
-
Axle number from: S482214,
Y422060, T300000 - Block Separation:
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Kõrgus (mm): 77
- Veljeaukude hulk: 5
- Piduriketta liik: õhutusega
-
Tsentri läbimõõt (mm): 85,
1 - Pealispind: õlitatud
-
Netokaal [kg]: 6,
85 - Lisainfo: 1tk. juurde tellida ei saa
- Additional information: 1tk. juurde tellida ei saa
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Aukude arv: 5
- Pealispind: kaetud
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Aukude arv: 5
- Pealispind: kaetud
- Lisainfo: Brake Disc
- Additional information: Brake Disc
- for brake disc thickness [mm]: 22
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Materjal: Terasvalu
- Välisläbimõõt [mm]: 276
- Ava Ø (mm): 130
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 77.2
- Centering Diameter [mm]: 85
- Test Mark: ECE R90
- Replace in pairs only:
- Required quantity: 2
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pealispind: kaetud
- Aukude arv: 5
- Ava Ø (mm): 130
- Kõrgus (mm): 77
- Välisläbimõõt [mm]: 276
- Tsentri läbimõõt (mm): 85
- Pidurikettajämedus [mm]: 22
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Front Axle
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 77.2
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 156.3
- Bore Ø [mm]: 15
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pealispind: kaetud
- Aukude arv: 5
- Ava Ø (mm): 130
- Kõrgus (mm): 96
- Välisläbimõõt [mm]: 258
- Tsentri läbimõõt (mm): 85
- Pidurikettajämedus [mm]: 12
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 77
- Aukude arv: 5
- Ava Ø (mm): 130
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 19
- Name: PIDURIKETAS
- Manufacturer: MAX
- Wheelbase: for shortened wheelbase
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 97
- Aukude arv: 5
- Ava Ø (mm): 130
- Piirangutega toode/piirangu info 2: koos kruvidega
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 10
- Name: PIDURIKETAS
- Manufacturer: MAX
-
Lisainfo: 19-
0793 -
Additional information: 19-
0793
- Construction Year from: 05.2001
-
Payload [kg]: 3,
500 -
Piduriketta rummu kõrgus [mm]: 80,
8 - Installatsiooni pool: Tagasild
- Veljeaukude hulk: 5
-
Kõrgus (mm): 96,
7 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 16
- Miinimumjämedus (mm): 14
- Välisläbimõõt [mm]: 272
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 96.7
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 15
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Installatsiooni pool: Tagasild
- Piduriketta liik: õhutusega
- Pealispind: kaetud
- Aukude arv: 6
- Ava Ø (mm): 145
- Kõrgus (mm): 93
- Välisläbimõõt [mm]: 285
- Tsentri läbimõõt (mm): 120
- Pidurikettajämedus [mm]: 22
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 258
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 96.7
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 15
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
-
Payload [kg]: 2,
800 - Tsentri läbimõõt (mm): 85
- Aukude arv: 5
- Välisläbimõõt [mm]: 258
- Miinimumjämedus (mm): 10
- Pidurikettajämedus [mm]: 12
- Kõrgus (mm): 96
- Piduriketta liik: täis
- Manufacturer: LPR
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pealispind: kaetud
- Aukude arv: 5
- Ava Ø (mm): 130
- Kõrgus (mm): 96
- Välisläbimõõt [mm]: 272
- Tsentri läbimõõt (mm): 85
- Pidurikettajämedus [mm]: 16
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 276
- Height [mm]: 77
- Number of Holes: 5
- Centering Diameter [mm]: 85
- Bolt Hole Circle Ø [mm]: 130
- Surface: Painted
- Weight [kg]: 13.75
- Minimum thickness [mm]: 19
- Manufacturer: TOMEX BRAKES
- OE-numbri jaoks: 904 423 0312
- suunatud:
- Installatsiooni pool: Tagasild
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 285
- Aukude arv: 6
- Ava Ø (mm): 145
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Fitting Position: Rear Axle
- Piduriketta liik: täis
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0241/ 1832 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 272
- Pidurikettajämedus [mm]: 16
- Miinimumjämedus (mm): 14
- Tsentri läbimõõt (mm): 85
-
Kõrgus (mm): 96,
5 - Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG3237
-
Payload [kg]: 2,
800 -
Piduriketta rummu kõrgus [mm]: 84,
6 - Veljeaukude hulk: 5
-
Kõrgus (mm): 96,
7 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
- Välisläbimõõt [mm]: 258
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Installatsiooni pool: Tagasild
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 272
- Pidurikettajämedus [mm]: 16
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 97
- Aukude arv: 5
- Ava Ø (mm): 130
- Piirangutega toode/piirangu info 2: koos kruvidega
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 14
- Name: PIDURIKETAS
- Manufacturer: MAX
- Construction Year to: 05.2001
-
Piduriketta rummu kõrgus [mm]: 80,
8 - Installatsiooni pool: Tagasild
- Veljeaukude hulk: 5
-
Kõrgus (mm): 96,
7 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 16
- Miinimumjämedus (mm): 14
- Välisläbimõõt [mm]: 272
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Rear axle number from: I 040001,
L 847989, X 304 861 - Axle Code: 741.407
- for SA code: 504014 01
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
-
Jämedus/Tugevus (mm): 96,
5 - Välisläbimõõt [mm]: 258
- Ava Ø (mm): 130
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 10
- Tsentri läbimõõt (mm): 85
-
Kaal (kg): 6,
135 - Manufacturer: FEBI HAMULCE
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- for article number: LP3664
- Piduriketta liik: täis
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0344/ 1403 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
- Tsentri läbimõõt (mm): 85
-
Kõrgus (mm): 96,
6 - Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Front Axle
- Piduriketta liik: õhutusega
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0339/ 1676 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 77
- Manufacturer: DELPHI LOCKHEED HAMULCE
-
Rear axle number to: I 04000,
L 874988, X 304860, Z 161213 - Axle Code: 741.407
- for SA code: 504014 01
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
-
Jämedus/Tugevus (mm): 95,
5 - Välisläbimõõt [mm]: 258
- Ava Ø (mm): 130
- Läbimõõt,kinnituspunktid (mm): 15
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 10
- Kaal (kg): 6
- Hooldusinfot jälgida:
- Manufacturer: FEBI HAMULCE
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 258
- Height [mm]: 97
- Number of Holes: 5
- Centering Diameter [mm]: 85
- Bolt Hole Circle Ø [mm]: 130
- Surface: Painted
- Weight [kg]: 6.7
- Drum diameter [mm]: 160
- Minimum thickness [mm]: 10
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
- Piduriketta liik: õhutusega
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0339/ 0048 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: hochgekohlt
- Välisläbimõõt [mm]: 285
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 72
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG4067
- Pidurikettajämedus [mm]: 22
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 76
- Välisläbimõõt [mm]: 276
- Ava Ø (mm): 130
- Läbimõõt,kinnituspunktid (mm): 15
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Kaal (kg): 7
- Hooldusinfot jälgida:
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
-
Payload [kg]: 3,
500 - Pidurikettajämedus [mm]: 16
- Piduriketta liik: täis
- Miinimumjämedus (mm): 14
- Välisläbimõõt [mm]: 272
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 96
- Aukude arv: 5
- Manufacturer: LPR
- Fitting Position: Front Axle
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Kõrgus (mm): 77
- Miinimumjämedus (mm): 19
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 156,
2 - Ava Ø (mm): 130
-
Tsentri läbimõõt (mm): 85,
1 -
Puurpilt/auguarv: 05/
07 -
Ø auguga kinnitus polt ratta [mm]: 15,
3 -
pakendi pikkus [cm]: 30,
8 -
pakendi laius [cm]: 30,
8 -
pakendi kõrgus [cm]: 18,
5 -
Kaal (kg): 6,
7 - Manufacturer: MINTEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
-
Rear axle number from: I 040001,
L 847989, X 304 861 - Axle Code: 741.407
- for SA code: 504014 01
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
-
Jämedus/Tugevus (mm): 96,
5 - Välisläbimõõt [mm]: 258
- Ava Ø (mm): 130
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 10
- Tsentri läbimõõt (mm): 85
-
Kaal (kg): 6,
135 - Name: SW 10 92 2860
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Construction Year to: 04.2001
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Height [mm]: 77
- Rim Hole Number: 5
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 130
- Hub Diameter [mm]: 180
- Weight [kg]: 6.67
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Pidurikettajämedus [mm]: 22
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 76
- Välisläbimõõt [mm]: 276
- Ava Ø (mm): 130
- Läbimõõt,kinnituspunktid (mm): 15
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Kaal (kg): 7
- Name: SW 10 90 7517
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 272
- Pidurikettajämedus [mm]: 16
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 97
- Aukude arv: 5
- Ava Ø (mm): 130
- Piirangutega toode/piirangu info 2: koos kruvidega
- Pealispind: värvitud
- Miinimumjämedus (mm): 14
- Name: PIDURIKETAS
- Manufacturer: MAX
-
Rear axle number to: I 04000,
L 874988, X 304860, Z 161213 - Axle Code: 741.407
- for SA code: 504014 01
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
-
Jämedus/Tugevus (mm): 95,
5 - Välisläbimõõt [mm]: 258
- Ava Ø (mm): 130
- Läbimõõt,kinnituspunktid (mm): 15
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 10
- Kaal (kg): 6
- Name: SW 10 90 9102
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 276
- Keskaugu läbimõõt (mm): 180
- Tsentri läbimõõt (mm): 85
- Pidurikettajämedus [mm]: 22
-
Kõrgus (mm): 77,
5 - Veljeaukude hulk: 5
- Ava Ø (mm): 130
- ainult paarina välja vahetada:
- Manufacturer: TOPRAN HANS PRIES
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 05.2001
- Wheelbase: short wheelbase
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 258
-
Kõrgus (mm): 96,
6 - Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 112
- Ø auguga kinnitus polt ratta [mm]: 15
- Aukude arv: 5
- Piduriketta liik: täis
- vajaminev tükihulk: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Piduriketta liik: õhutusega
- Aukude arv: 6
-
Kontrolltähistus: E1 90R-
02C0958/ 2530 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 285
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 20
- Tsentri läbimõõt (mm): 120
- Kõrgus (mm): 93
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE BG3399
- Fitting Position: Rear Axle
- for model code: 902.###
- Construction Year to: 04.2001
- Axle Number: 741.408
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 16
- Height [mm]: 96.5
- Rim Hole Number: 5
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 130
- Weight [kg]: 6.93
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Construction Year to: 05.2001
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 272
-
Kõrgus (mm): 96,
6 - Pidurikettajämedus [mm]: 16
- Miinimumjämedus (mm): 14
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Ø auguga kinnitus polt ratta [mm]: 15
- Aukude arv: 5
- Piduriketta liik: täis
- vajaminev tükihulk: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Veljeaukude hulk: 5
-
Kõrgus (mm): 77,
2 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Välisläbimõõt [mm]: 276
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Piduriketta rummu kõrgus [mm]: 55
- Installatsiooni pool: Esisild
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
-
Kõrgus (mm): 96,
7 - Miinimumjämedus (mm): 10
- Siseläbimõõt [mm]: 160
- Ava Ø (mm): 130
- Tsentri läbimõõt (mm): 85
-
Puurpilt/auguarv: 05/
07 - Ø auguga kinnitus polt ratta [mm]: 15
-
pakendi pikkus [cm]: 29,
8 -
pakendi laius [cm]: 29,
8 -
pakendi kõrgus [cm]: 21,
5 -
Kaal (kg): 6,
3 - Manufacturer: MINTEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 258
- Brake Disc Thickness [mm]: 12
- Brake Disc Type: solid
- Minimum thickness [mm]: 10
- Height [mm]: 96.7
- Bolt Hole Circle Ø [mm]: 130
- Centering Diameter [mm]: 85
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Name: PIDURIKETAS
- Manufacturer: QUARO
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Parameter: DP1010.11.0122
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Height [mm]: 96.6
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 15.9
- Minimum thickness [mm]: 14
- Outer Diameter [mm]: 272
- Number of Holes: 1
- Centering Diameter [mm]: 85
- No. of holes 1: 1
- Manufacturer: DRIVE
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Parameter: DP1010.11.0735
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Height [mm]: 76.8
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 275.7
- Number of Holes: 1
- Centering Diameter [mm]: 85
- No. of holes 1: 1
- Manufacturer: DRIVE
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 276
- Kõrgus (mm): 77
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Ø auguga kinnitus polt ratta [mm]: 15
- Aukude arv: 5
- Piduriketta liik: õhutusega
- vajaminev tükihulk: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Fitting Position: Rear Axle
- for model code: 901.###
- Construction Year from: 05.2001
- Axle Number: 741.407
- Outer Diameter [mm]: 258
- Brake Disc Thickness [mm]: 12
- Height [mm]: 95.5
- Rim Hole Number: 5
- Weight [kg]: 6.16
- Brake Disc Type: solid
- Surface: Coated
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Wheelbase: for shortened wheelbase
- Parameter: DP1010.11.0143
- Fitting Position: Rear Axle
- Height [mm]: 96.5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Number of bores: 5
- Outer Diameter [mm]: 258
- Centering Diameter [mm]: 85
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Piduriketta liik: täis
- Töötlus: hochgekohlt
- Pealispind: kaetud
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Kõrgus (mm): 96
- Veljeaukude hulk: 5
- Ava Ø (mm): 130
- Tsentri läbimõõt (mm): 85
- Kontrolltähistus: ECE R90 APPROVED
-
Loatüüp: lubatud M1/
N1 klassi sõidukitele - Miinimumjämedus (mm): 10
-
Kaal (kg): 6,
1 -
Puurpilt/auguarv: 7/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Bolt Hole Circle Ø [mm]: 130
- Number of Holes: 5
- Height [mm]: 77
- Centering Diameter [mm]: 85
- Colour: black
- Outer Diameter [mm]: 276
- Manufacturer: FAST
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 19
- Height [mm]: 77
- Bolt Hole Circle Ø [mm]: 130
- Centering Diameter [mm]: 85.1
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Name: PIDURIKETAS
- Manufacturer: QUARO
- Fitting Position: Front Axle
- Construction Year from: 05.2001
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Height [mm]: 77
- Rim Hole Number: 5
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 130
- Weight [kg]: 6.85
- Surface: Coated
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Construction Year to: 04.2001
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 77
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 276
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 19
- Väändejõud [Nm]: 175
- Manufacturer: BREMBO
- Name: BR 09.9618.14
Lühiinformatsioon: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
- Tyres: for dual tyres
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 285
-
Kõrgus (mm): 92,
9 - Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 120
- Ava Ø (mm): 145
- Ø auguga kinnitus polt ratta [mm]: 15
- Aukude arv: 6
- Piduriketta liik: õhutusega
- vajaminev tükihulk: 2
- Name: PIDURIKETAS
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
-
Kõrgus (mm): 96,
7 - Ava Ø (mm): 130
- Piduriketta liik: täis
- Tsentri läbimõõt (mm): 85
- Aukude arv: 5
- Pealispind: õlitatud
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 - Ava läbimõõt kuni [mm]: 15
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 272
- Pidurikettajämedus [mm]: 16
- Miinimumjämedus (mm): 14
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 97
- Aukude arv: 5
- Keermemõõt: 15
- Ava Ø (mm): 130
- Trumli läbimõõt [mm]: 160
- Piirangutega toode/piirangu info 2: koos kruvidega
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E190R-
02C0204/ 0187 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Name: PIDURIKETAS
- Manufacturer: TRW
- Quality class: Q
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Bolt Hole Circle Ø [mm]: 130
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 97
- Centering Diameter [mm]: 85
- Colour: black
- Outer Diameter [mm]: 272
- Manufacturer: FAST
- Fitting Position: Front Axle
- Construction Year from: 05.2001
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Aukude arv: 5
- Kõrgus (mm): 77
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 276
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 19
- Väändejõud [Nm]: 175
- Manufacturer: BREMBO
- Name: BR 09.9618.24
Lühiinformatsioon: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
- Fitting Position: Front Axle
- Piduriketta liik: sisemine õhutus
- Töötlus: hochgekohlt
- Pealispind: kaetud
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Kõrgus (mm): 77
- Veljeaukude hulk: 5
- Ava Ø (mm): 130
- Tsentri läbimõõt (mm): 85
- Kontrolltähistus: ECE R90 APPROVED
-
Loatüüp: lubatud M1/
N1 klassi sõidukitele - Miinimumjämedus (mm): 19
-
Kaal (kg): 6,
7 -
Puurpilt/auguarv: 7/
5 - Manufacturer: ZIMMERMANN
- Fitting Position: Rear Axle
- Construction Year from: 05.2001
-
Payload [kg]: 2,
800 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Aukude arv: 5
- Kõrgus (mm): 97
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 258
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 10
- Väändejõud [Nm]: 130
- Name: BR 08.7724.20
- Manufacturer: BREMBO
- Parameter: DP1010.11.0766
- Rim Hole Number: 6
- Fitting Position: Rear Axle
- Height [mm]: 92.9
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 284.8
- Centering Diameter [mm]: 120.2
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Construction Year from: 05.2001
-
Payload [kg]: 3,
500 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 16
- Aukude arv: 5
- Kõrgus (mm): 97
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 272
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 14
- Väändejõud [Nm]: 130
- Manufacturer: BREMBO
- Name: BR 08.7725.20
- Fitting Position: Front Axle
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
- Number of Holes: 5
-
Machining: Alloyed/
High- carbon - Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 77.2
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 156.3
- Bore Ø [mm]: 15
-
Test Mark: E1 90R-
02C0115/ 0425 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
- Fitting Position: Rear Axle
- Construction Year to: 04.2001
-
Payload [kg]: 3,
500 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 16
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 97
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 272
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 14
- Väändejõud [Nm]: 130
- Manufacturer: BREMBO
- Name: BR 08.7725.10
- Fitting Position: Rear Axle
- Construction Year to: 04.2001
-
Payload [kg]: 2,
800 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 97
- Tsentri läbimõõt (mm): 85
- Välisläbimõõt [mm]: 258
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 10
- Väändejõud [Nm]: 130
- Name: BR 08.7724.10
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Brake Disc Type: solid
- Number of Holes: 5
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 96.7
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 15
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0248/ 0947 - Name: PIDURIKETAS
- Manufacturer: ATE
- Quality class: Q
- Fitting Position: Front Axle
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Kõrgus (mm): 77
- Ava Ø (mm): 130
- Piduriketta liik: õhutusega
-
Tsentri läbimõõt (mm): 85,
1 - Aukude arv: 5
- Pealispind: õlitatud
- Töötlus: hochgekohlt
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 - Ava läbimõõt kuni [mm]: 15
- Name: PIDURIKETAS
- Manufacturer: BOS
- Fitting Position: Front Axle
- Construction Year to: 04.2001
- Wheelbase: for extended wheelbase
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 77
- Aukude arv: 5
- Keermemõõt: 15
- Ava Ø (mm): 130
- Värv: must
- Pealispind: värvitud
- Tehnilisi andmeid jälgida:
-
Kontrolltähistus: E190R-
02C0176/ 0569 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Name: PIDURIKETAS
- Manufacturer: TRW
- Quality class: Q
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 258
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
-
Machining: Alloyed/
High- carbon - Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 96.7
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 15
-
Test Mark: E1 90R-
02C0248/ 0930 - Name: PIDURIKETAS
- Manufacturer: ATE
- Installatsiooni pool: Esisild
- Veljeaukude hulk: 5
-
Kõrgus (mm): 77,
2 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Välisläbimõõt [mm]: 276
- Tsentri läbimõõt (mm): 85
- Ava Ø (mm): 130
- Piduriketta rummu kõrgus [mm]: 55
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Wheelbase: for shortened wheelbase
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
- Tsentri läbimõõt (mm): 85
- Kõrgus (mm): 97
- Aukude arv: 5
- Keermemõõt: 15
- Ava Ø (mm): 130
- Trumli läbimõõt [mm]: 160
- Piirangutega toode/piirangu info 2: koos kruvidega
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E1 90R-
02 C0204/ 0283 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Name: PIDURIKETAS
- Manufacturer: TRW
- Quality class: Q
- Fitting Position: Rear Axle
-
Payload [kg]: 4,
600 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Aukude arv: 6
- Kõrgus (mm): 93
- Tsentri läbimõõt (mm): 120
- Välisläbimõõt [mm]: 285
- Töötlus: hochgekohlt
- Miinimumjämedus (mm): 19
- Väändejõud [Nm]: 175
- Name: BR 09.8475.10
- Manufacturer: BREMBO
Lühiinformatsioon: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
- Fitting Position: Rear Axle
- Wheelbase: long wheelbase
- Height [mm]: 96
- Weight [kg]: 7
- Bore Ø [mm]: 26
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Outer Diameter [mm]: 272
- Number of Holes: 5
- Centering Diameter [mm]: 85
- Tightening Torque [Nm]: 130
- Bolt Hole Circle Ø [mm]: 112
- Surface: Oiled
-
Brake System: Ate /
Bosch - Packing Type: Box
- Quantity Unit: Piece
-
Supplementary Article/Info 2: without bolts/
screws - Version: J
- Number of mounting bores: 2
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Manufacturer: JURID
- Fitting Position: Front Axle
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 276
- Pidurikettajämedus [mm]: 22
- Kõrgus (mm): 77
- Miinimumjämedus (mm): 19
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 156,
2 - Ava Ø (mm): 130
-
Tsentri läbimõõt (mm): 85,
1 -
Puurpilt/auguarv: 05/
07 -
Ø auguga kinnitus polt ratta [mm]: 15,
3 -
pakendi pikkus [cm]: 30,
8 -
pakendi laius [cm]: 30,
8 -
pakendi kõrgus [cm]: 18,
5 -
Kaal (kg): 6,
7 - Name: PIDURIKETAS
- Manufacturer: TEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Fitting Position: Rear Axle
- Wheelbase: for shortened wheelbase
- Height [mm]: 96
- Weight [kg]: 6
- Bore Ø [mm]: 26
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Outer Diameter [mm]: 258
- Number of Holes: 5
- Centering Diameter [mm]: 85
- Tightening Torque [Nm]: 130
- Bolt Hole Circle Ø [mm]: 112
- Surface: Oiled
-
Brake System: Ate /
Bosch -
Axle Number: 7027519,
bis L874988/ X304860, Z161213/ 1040000 - Packing Type: Box
- Quantity Unit: Piece
-
Supplementary Article/Info 2: without bolts/
screws - Hub Diameter [mm]: 5
- Version: J
- Number of mounting bores: 2
- Packaging length [cm]: 26
- Packaging width [cm]: 26
- Packaging height [cm]: 10.5
- Manufacturer: JURID
- Fitting Position: Rear Axle
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 258
- Pidurikettajämedus [mm]: 12
-
Kõrgus (mm): 96,
7 - Miinimumjämedus (mm): 10
- Pealispind: kaetud
- Siseläbimõõt [mm]: 160
- Ava Ø (mm): 130
- Tsentri läbimõõt (mm): 85
-
Puurpilt/auguarv: 05/
07 - Ø auguga kinnitus polt ratta [mm]: 15
-
pakendi pikkus [cm]: 29,
8 -
pakendi laius [cm]: 29,
8 -
pakendi kõrgus [cm]: 21,
5 -
Kaal (kg): 6,
3 - Name: PIDURIKETAS
- Manufacturer: TEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Fitting Position: Front Axle
- Outer Diameter [mm]: 276
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
- Number of Holes: 5
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Bolt Hole Circle Ø [mm]: 130
- Height [mm]: 77.2
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 156.3
- Bore Ø [mm]: 15
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0858/ 1315 - MAPP code available:
- Name: PIDURIKETAS
- Manufacturer: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Height [mm]: 77
- Weight [kg]: 7
- Bore Ø [mm]: 26
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 276
- Number of Holes: 5
- Centering Diameter [mm]: 85
- Tightening Torque [Nm]: 170
- Bolt Hole Circle Ø [mm]: 130
- Surface: Oiled
-
Brake System: Ate /
Perrot - Packing Type: Box
- Quantity Unit: Piece
-
Supplementary Article/Info 2: without bolts/
screws - Version: J
- Number of mounting bores: 2
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 9.5
- Manufacturer: JURID
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks