• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,125
• Socket colour: black
• Manufacturer: JP GROUP

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: OM 654.920
• Required quantity: 1
• Name: EP 1.994.014
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Engine Code: OM 654.920
• Required quantity: 1
• Manufacturer: FACET

• Thread Size: 15 mm
• Manufacturer: VERNET

• Engine Code: OM 654.920
• Thread Size: M12x1,25
• Spanner Size: 19
• Name: EP 1.830.400
• Manufacturer: EPS

• Engine Code: OM 654.920
• Thread Size: M12x1,25
• Spanner Size: 19
• Manufacturer: FACET

• for OE number: 005 153 50 28, 2E0 906 051 A
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Fabrication Number: ECM-ME-000
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Sensor Type: NTC Sensor
• Housing Colour: black
• Manufacturer: FAE

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Required quantity: 1
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Engine Code: OM 654.920
• Required quantity: 1
• Fitting Position: after EGR cooler
• Thread Size: M12x1
• Spanner Size: 16
• Manufacturer: FACET

• Number of pins: 3
• Fabrication Number: ECM-ME-002
• Manufacturer: NTY

• Quantity: 1
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Socket colour: black
• Plug Type: Female
• Number of pins: 3
• Number of used contacts: 3
• Number of circuits: 3
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 700
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Manufacturer: METZGER

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 940
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Quantity: 1
• Number of pins: 3
• Name: DE PS20145-12B1
• Manufacturer: DELPHI

• Frequency Range [MHz]: 433
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,040
• Length [mm]: 27
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 950
• paired article number: 31995
• Weight [kg]: 0.15
• Manufacturer: A.B.S.

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 1,135
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 920
• Number of pins: 2
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU230048271
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 05.2019
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Fitting Position: before soot particulate filter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV876

• Fitting Position: Front Axle
• Overall Length [mm]: 1,135
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,060
• paired article number: 30237
• Weight [kg]: 0.05
• Manufacturer: A.B.S.

• Engine Code: OM 654.920
• Manufacturer: FACET

• Required quantity: 2
• Fitting Position: Front Axle
• Cable Length [mm]: 1,065
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012679951
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 05.2019
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00466

• Construction Year from: 05.2019
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Name: BS F026C00469
• Manufacturer: BOSCH

• Construction Year from: 05.2019
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00468

• Construction Year from: 05.2019
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Engine Code: OM 654.920
• Thread Size: M10x1
• Spanner Size: 24
• Name: EP 1.980.018
• Manufacturer: EPS

• Engine Code: OM 654.920
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Required quantity: 2
• Fitting Position: Rear Axle
• Cable Length [mm]: 945
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012679961
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• Vehicle Equipment: for vehicles with park distance control
• for special equipment code: EZ7, EZ8
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 66
• Cable Length [mm]: 999
• Number of pins: 2
• Thread Size: M12X1
• Manufacturer: METZGER

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year to: 02.2024
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Mounting Type: Bolted
• Manufacturer: BH SENS HUF

• Fitting Position: Front, outer
• for special equipment code: EZ7, EZ8
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: angled
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• for special equipment code: MU6
• Cable Length [mm]: 570
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.1
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Required quantity: 4
• Fitting Position: both sides, inner, Front
• Vehicle Equipment: for vehicles with park distance control
• for special equipment code: EZ7, EZ8
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: EGT-ME-039
• Cable Length [mm]: 400
• Manufacturer: NTY

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• for special equipment code: M654+M014
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Number of connectors: 3
• Fabrication Number: ECS-ME-008
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: EPO-ME-007
• Manufacturer: NTY

• Fabrication Number: ECS-RE-004
• Number of pins: 3
• Manufacturer: NTY

• Fabrication Number: ECS-ME-010
• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Number of connectors: 2
• Manufacturer: NTY

• Fabrication Number: EGT-ME-041
• Fitting Position: before catalytic converter
• Number of pins: 2
• Cable Length [mm]: 470
• Sensor Type: PTC
• for OE number: A0009059604
• Manufacturer: NTY

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Surface: primed
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,064
• Weight [kg]: 0.044
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Soot Particulate Filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Length [mm]: 1,030
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.042
• Manufacturer: TEXTAR

• Production date to: 16.11.2021
• for special equipment code: MT0, MT2
• Vehicle production plant: 3, 4
• Block Separation:
• Production date from: 16.11.2021
• Cable Length [mm]: 490
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.09
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Fitting Position: after catalytic converter, before catalytic converter

Manufacturer: KAMOKA

• Fitting Position: Oil Filter Housing
• Connector Shape: oval
• Manufacturer: METZGER

• not for special equipment code: 926, 926K, F118, F177, F247, F910
• Fitting Position: EGR Valve
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 947
• Weight [kg]: 0.042
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV770

• Number of pins: 3
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• not for vehicle production country: USA
• Manufacturer: HELLA

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Quantity: 1
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• Length [mm]: 940
• MAPP code available:
• Manufacturer: ATE

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after catalytic converter
• Production date to: 16.11.2021
• Vehicle production plant: 3, 4
• for special equipment code: MT0, MT2
• Block Separation:
• Production date from: 16.11.2021
• Shape: Bent
• Connector Shape: oval
• Cable Length [mm]: 455
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• for special equipment code: MU6
• Shape: Bent
• Connector Shape: oval
• Cable Length [mm]: 530
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Fabrication Number: EPP-ME-017
• Manufacturer: NTY
• Name: NTY EPP-ME-017

• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 1,135
• MAPP code available:
• Manufacturer: ATE
• Additional information: 24.0711-5529.3
• Lisainfo: 24.0711-5529.3

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Engine Code: OM 654.920
• Sensor Length [mm]: 133.6
• Name: EP 1.800.245
• Manufacturer: EPS

• Engine Code: OM 654.920
• Sensor Length [mm]: 133.6
• Manufacturer: FACET

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Number of pins: 4
• Connector Shape: oval
• Voltage [V]: 5
• for OE number: A6450900048
• Manufacturer: MEAT & DORIA

Exhaust System: before soot particulate filter

Exhaust System: for two-part exhaust system