Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle,
both sides - Supplementary Article/Info 2: with mounting sleeves
-
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: MAX
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 38
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 B T - Manufacturer: MEY
-
Fitting Position: Left,
Right, Lower - Thickness 1 [mm]: 43
- Inner Diameter 1 [mm]: 12.1
- Outer Diameter 1 [mm]: 32.2
- Name: DE TD450W
- Manufacturer: DELPHI
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 38
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 36
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: MEY
-
Fitting Position: Rear Axle,
both sides -
Name: Puks -
Kndmik DB T. W124/ 201/ 210 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 43
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 - Manufacturer: MEY
-
Fitting Position: Rear Axle,
both sides -
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
Lisainfo: Track control arm, rear
- Fitting Position: Front Axle
- Rod/Strut: Push Rod
- Quantity Unit: Set
- Quality class: PJ
- Name: Tension rod left=right
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Pull Rod
- Length [mm]: 247
- Material: Sheet Steel
- Quantity Unit: Piece
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MAX
-
Fitting Position: Front,
Rear Axle, Upper - Rod/Strut: Pull Rod
-
Alternative Repair Kit: V30-
7541 - Weight [kg]: 0.828
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Name: LMI 2963101
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Name: COC 49398571
- Manufacturer: CORTECO
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left, Front - Rod/Strut: Guide Rod
- Length [mm]: 247
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MEY
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Supplementary Info: with attachment material
-
Name: Stabilisaator,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left, Front - Rod/Strut: Guide Rod
- Length [mm]: 247
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR KPL ZE RUBAMI
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
-
paired article number: V30-
7542 - Weight [kg]: 1.189
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Upper, both sides, Front - Rod/Strut: Pull Rod
- Article number of recommended accessories: 21685 01
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left, Rear - Rod/Strut: Guide Rod
- Length [mm]: 298
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR GàRNY - Manufacturer: MEY
- Fitting Position: Rear Axle
- Rod/Strut: Pull Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093510
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle,
both sides, Upper, Front -
Name: Stabilisaator,
kndmik - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Guide Rod
- Length [mm]: 245
- Thread Size: M10x1
- Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MEY
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- SVHC: No SVHC present!
-
Name: Stabilisaator,
kndmik - Manufacturer: FAG
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Lisainfo: 29630 01 LEM
- Additional information: 29630 01 LEM
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 245
- Thread Size 1: M10x1
- Supplementary Article/Supplementary Info: with accessories
- Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR ZE RUB¤
-
Fitting Position: Upper,
Rear Axle Left, Rear Axle Right, Rear - Rod/Strut: Guide Rod
- Length [mm]: 298
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093610
- Rod/Strut: Coupling Rod
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: CORTECO
- Fitting Position: Rear Axle
- Rod/Strut: Push Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
-
Name: Stabilisaator,
kndmik - Manufacturer: FAG
-
Fitting Position: Rear Axle Lower,
Rear, both sides - Rod/Strut: Guide Rod
- Length [mm]: 315
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Upper, both sides, Rear -
Rod/Strut: Pull Rod,
Camber Link - Supplementary Article/Supplementary Info: with accessories
-
Name: STABILISAATOR,
KNDMIK - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks