• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-MZ-019
• Manufacturer: NTY

• Manufacturer: MAGNETI MARELLI
• Name: MM SPA116

• Production date from: 04/02
• for OE number: 5072891
• Manufacturer: SASIC

• Thread Size: M 12x1,5
• Number of pins: 2
• Colour: grey
• Supplementary Article/Supplementary Info: with gasket/seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Number of pins: 3
• Name: DE SS12277-12B1
• Manufacturer: DELPHI

• Number of pins: 4
• Fabrication Number: ECM-MZ-000
• Manufacturer: NTY

• Fabrication Number: ESS-FR-002
• Manufacturer: NTY

• Engine Code: L813
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Engine Code: L813
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Engine Code: L813
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Engine Code: L813
• Resistor [Ohm]: 450
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 34
• Housing Colour: black
• Weight [kg]: 0.032
• Alternative Repair Kit: 550040
• Manufacturer: ERA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Fabrication Number: ECD-MZ-001
• Manufacturer: NTY
• Name: NTY ECD-MZ-001

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 550
• Manufacturer: VALEO
• Name: VA 253839

• Length [mm]: 33.5
• Outer Diameter [mm]: 21.38
• Number of connectors: 3
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 34
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-MZ-020
• Manufacturer: NTY

• Vehicle Equipment: for vehicles without start-stop function
• Fitting Depth [mm]: 33.7
• Rated Voltage [V]: 12
• Number of connectors: 3
• Number of mounting bores: 1
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP170.06
• Manufacturer: SNR

• Number of pins: 5
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: AB 120-08-085
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• OE-numbri jaoks: 1 367 334
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Laius (mm): 50
• Kõrgus (mm): 25
• Pikkus (mm): 65
• Manufacturer: AT AUTOTEILE

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: L813
• Length [mm]: 300
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: L813
• Length [mm]: 300
• Manufacturer: FACET

• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 260
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Surve alates (Pa): 10 000
• Surve (Pa) kuni: 115 000
• Pinge [V]: 5
• Pistikkontaktide arv: 4
• Kinnitusaukude hulk: 1
• Piirangutega toode/piirangu info: koos tihenditega
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PP358152531
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 300
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Manufacturer: FAE

• Number of pins: 3
• Manufacturer: METZGER

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: L8-DE
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: L813
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: L8-DE
• Construction Year to: 12.2012
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Number of pins: 3
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Number of pins: 5
• Recommended additional repairs: Air Filter
• Used part return not required:
• Fitting Position: Air Filter Housing
• New Part:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV107

• Engine Code: L8-DE
• Construction Year to: 12.2012
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: VDO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: L813
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: L813
• Manufacturer: FACET

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: L813
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 10.2007
• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: sinine
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV906
• Manufacturer: ESEN SKV

• Number of pins: 5
• for OE number: 22204-21010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 79
• alternative item: -
• Name: DN DMA-0113
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Engine Code: L813
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 33.7
• Supplementary Article/Info 2: with seal ring