• Engine Code: ZY-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 7.8606, 7.8732, 7.8733
• Manufacturer: FACET

• Engine Code: ZY-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-MZ-005
• Manufacturer: NTY

• Housing Colour: green
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Length [mm]: 79
• Thread Size: M10 x 1,25
• Cable Length [mm]: 440
• Number of pins: 1
• Supplementary Article/Info 2: with cable
• Fabrication Number: ESS-MZ-001
• Manufacturer: NTY
• Name: NTY ESS-MZ-001

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: BREMI

• Height [mm]: 26.7
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Cable Length [mm]: 440
• Number of pins: 1
• Manufacturer: JPN

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 27
• for OE number: ZJ0118230
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 1
• Name: Detonatsiooniandur
• Manufacturer: MAX
• Lisainfo: 24-0227
• Additional information: 24-0227

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11462

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-MZ-011
• Manufacturer: NTY

• Number of pins: 1
• Spanner Size: 24 mm
• Thread Size: M10x1,25
• Cable Length [mm]: 410
• Fitting Depth [mm]: 12
• for OE number: ZJ0118921
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-MZ-010
• Manufacturer: NTY

• Construction Year to: 11.2014
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 780
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221761
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Number of pins: 3
• Fitting Depth [mm]: 27
• Manufacturer: ERA

• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 26.7
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Cable Length [mm]: 415
• Number of pins: 1
• Manufacturer: DELPHI ELEKTRONIKA

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV102

• External Thread Size: M10 x 1,25
• Number of connectors: 1
• Weight [kg]: 0.075
• Name: DETONATSIOONIANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV107

• Oxygen Sensor: Diagnostic Probe, Planar probe
• Number of pins: 4
• Cable Length [mm]: 730
• for OE number: Z60218861A
• Manufacturer: MEAT&DORIA

• Engine Code: ZY-VE
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 10
• Pressure to [kPA]: 214
• Output Voltage, from [V]: 0.94
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.201
• Manufacturer: EPS

• Quantity: 1
• Number of pins: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

Manufacturer: MAGNETI MARELLI

Manufacturer: JAPKO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Number of mounting bores: 2
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ZY-VE
• Manufacturer: FACET

• Engine Code: ZY-VE
• Name: EP 1.991.163
• Manufacturer: EPS

• Colour: black
• Number of pins: 3
• Manufacturer: FAE

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Alternatively:
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year to: 11.2014
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 595
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358229041
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 440
• Number of pins: 1
• Fitting Depth [mm]: 12
• Manufacturer: ERA

• Construction Year to: 11.2014
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Length [mm]: 600
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 6
• Connector Shape: oval
• Number of mounting bores: 2
• Vehicle Equipment: for vehicles with manual transmission
• for OE number: DF7841600A
• Name: Pedaalikomplekt
• Manufacturer: MD

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Height [mm]: 12
• Number of connectors: 1
• Weight [kg]: 0.1
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 22204-21010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0113

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Engine Code: ZY66, ZY84
• Block Separation:
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Exhaust System: for pre-catalytic converter
• for OE number: ZJ38188G1D
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 595
• Number of pins: 4
• Weight [g]: 149
• Gross Weight [g]: 194
• Manufacturer: DENSO
• Name: DN DOX-0558

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring