• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ZJ-VE
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: EP 1.830.177
• Manufacturer: EPS

• Fabrication Number: ECP-MZ-005
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-MZ-004
• Manufacturer: NTY

• Length [mm]: 79
• Thread Size: M10 x 1,25
• Cable Length [mm]: 440
• Number of pins: 1
• Supplementary Article/Info 2: with cable
• Fabrication Number: ESS-MZ-001
• Manufacturer: NTY
• Name: NTY ESS-MZ-001

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Thread Size: M 12x1,5, M12x1,5
• Supplementary Article/Supplementary Info: with seal
• Housing Colour: green
• Power [W]: 0.06
• Manufacturer: METZGER

• Supplementary Article/Info 2: with cable
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-MZ-047
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: BREMI

• Fitting Position: Rear
• Manufacturer: ASHIKA

• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 895
• Weight [kg]: 0.054
• Number of connectors: 2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Fabrication Number: ECT-MZ-001

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 689
• Weight [kg]: 0.052
• Number of connectors: 2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV484

• Construction Year from: 09.2010
• Construction Year to: 08.2013
• Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 27
• for OE number: ZJ01 18 230
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MZ-046

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11462

Manufacturer: MAGNETI MARELLI

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-MZ-011
• Manufacturer: NTY

• Fabrication Number: ECM-MZ-002
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-MZ-010
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 700
• Number of pins: 2
• Manufacturer: ERA

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Component Number: 120-08-106
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: ZJ-VE
• Fitting Position: Front Axle
• Cable Length [mm]: 705
• Sensor Length [mm]: 27.9
• Name: EP 1.960.212
• Manufacturer: EPS

• Number of pins: 1
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: ZJ46
• Construction Year to: 10.2014
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• Engine Code: ZJ46
• Construction Year to: 10.2014
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Engine Code: ZJ46
• Construction Year to: 10.2014
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Engine Code: ZJ46
• Construction Year to: 10.2014
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00466

• Fitting Position: Front
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Cable Length [mm]: 440
• Alternatively:
• Number of pins: 1
• Fitting Depth [mm]: 12
• Alternative Repair Kit: 550340
• Manufacturer: ERA

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358139461

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of pins: 3
• Fitting Depth [mm]: 27
• Manufacturer: ERA

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Metal
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358139481

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Colour: Aluminium
• Name: HE 6PP358139471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of pins: 3
• Fitting Depth [mm]: 17
• Manufacturer: ERA

• External Thread Size: M10 x 1,25
• Number of connectors: 1
• Weight [kg]: 0.075
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV102

• Model Year from: 2011
• Model Year to: 2013
• Transmission Type: Automatic Transmission
• Required quantity: 1
• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 29
• Number of pins: 3
• Sensor Type: Hall Sensor
• Fitting Position: in transmission housing
• Manufacturer: METZGER

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV107
• Manufacturer: ESEN SKV

• Height [mm]: 26.7
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Valve type: Air Valve
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Recommended change interval [km]: 160,000
• Recommended change interval [years]: 5
• Weight [kg]: 0.048
• Observe the vehicle manufacturer specifications:
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Number of pins: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4.5
• Valve stem material: Metal
• Colour: silver
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

Manufacturer: MAGNETI MARELLI

Manufacturer: JAPKO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Number of mounting bores: 2
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PV009517701

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

Manufacturer: JAPANPARTS

• Engine Code: ZJ-VE
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 10
• Pressure to [kPA]: 214
• Output Voltage, from [V]: 0.94
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.201
• Manufacturer: EPS

• Engine Code: ZJ-VE
• Name: EP 1.991.163
• Manufacturer: EPS

• Number of pins: 5
• Manufacturer: KAVO

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Number of pins: 3
• Colour: black
• Manufacturer: FAE

• Alternatively:
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Cable Length [mm]: 440
• Number of pins: 1
• Fitting Depth [mm]: 12
• Manufacturer: ERA

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142891

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10135-12B1

• for OE number: 22204-21010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Exhaust System: for pre-catalytic converter
• for OE number: ZJ38188G1D
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 595
• Number of pins: 4
• Weight [g]: 149
• Gross Weight [g]: 194
• Manufacturer: DENSO
• Name: DN DOX-0558

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased