Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Rims: for steel rims
- Wheel Fastening: Conical Seat F
- Internal Thread [mm]: M 12
- Thread Pitch [mm]: 1.5
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle,
Front Axle - Rims: for steel rims
- Thickness [mm]: 17
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Tightening Torque [Nm]: 110
- Weight [kg]: 0.021
- Observe service information:
- Name: RATTAMUTTER
- Manufacturer: FEB
- Additional information: FE11939
- Lisainfo: FE11939
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Rims: for steel rims
- Manufacturer: ACKOJA
-
Lisainfo: A32-
0146 VEMO -
Additional information: A32-
0146 VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Front Axle - Rims: for steel rims
- Thickness [mm]: 17
- Outer Diameter [mm]: 21
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Tightening Torque [Nm]: 110
- Weight [kg]: 0.021
- Observe service information:
- Name: RATTAMUTTER
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date from: 2006
- Production date to: 2012
- Length [mm]: 48
- Weight [kg]: 0.046
-
Thread Size: M12x1,
5 - Packaging length [cm]: 4.9
- Packaging width [cm]: 1.9
- Packaging height [cm]: 1.9
- Manufacturer: FEBEST
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 29.3
- Outer Diameter [mm]: 24
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Bolt/Nut Version: Cap Nut
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.06
- Observe service information:
- Name: RATTAMUTTER
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
-
Fitting Position: Rear Axle,
Front Axle -
Internal Thread [mm]: M12 x 1,
5 - Spanner Size: 21
- Quantity: 1
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 29.3
- Outer Diameter [mm]: 24
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Bolt/Nut Version: Cap Nut
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.06
- Observe service information:
- Manufacturer: SWAG
- Name: SW 83 93 4754
- Lisainfo: 83 93 4754 SWA
- Additional information: 83 93 4754 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Thickness [mm]: 29.3
- Outer Diameter [mm]: 24
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Bolt/Nut Version: Cap Nut
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.06
- Observe service information:
- Name: RATTAMUTTER
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
-
Internal Thread [mm]: M12 x 1,
5 - Spanner Size: 21
-
Fitting Position: Front Axle,
Rear Axle - Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Front Axle - Thickness [mm]: 29.3
-
Internal Thread [mm]: M 12 x 1,
5 - Spanner Size: 21
- Quality/ Grade: 8
- Wheel Fastening: Conical Seat F
- Manufacturer: METALCAUCHO
-
for OE number: B002-
37- 160B -
Fitting Position: Front Axle,
Rear Axle - Material: Steel
- Spanner Size: 21
- Bolt Head-/Nut Design: Male Hex
- Quality/ Grade: 8
- Surface: Chromed
- Wheel Fastening: Conical Seat F
- Bolt/Nut Version: Cap Nut
- Observe service information:
-
Fabrication Number: KSP-
MZ- 001 - Manufacturer: NTY
-
Name: NTY KSP-
MZ- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- for OE number: M115
- Lockable: Lockable
- Manufacturer: SWAG
- Name: SW 81 92 7057
- Lisainfo: 81 92 7057 SWA
- Additional information: 81 92 7057 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 26
- Outer Diameter [mm]: 23.7
-
Internal Thread Size: M12 x 1,
5 - Quality/ Grade: 8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.26
- Lockable: Lockable
- for OE number: M115
- Name: RATTAMUTTER
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks