• Filter type: Spin-on Filter
• Length [mm]: 155
• Outer Diameter [mm]: 85
• Fitted Diameter [mm]: 69
• Internal Thread [mm]: M16 x 1,5
• Manufacturer: JAPKO

• Height [mm]: 152
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 85
• Outer Diameter 2 [mm]: 70
• Inner Diameter [mm]: 62.5
• Thread Size 1: M 16 X 1,5
• Filter type: Filter Insert
• Manufacturer: SOFIMA
• Lisainfo: S 8500 NR SOF
• Additional information: S 8500 NR SOF

• Filter type: Spin-on Filter
• Height [mm]: 158
• Outer Diameter [mm]: 81
• Inner Diameter 1 [mm]: 61
• Inner Diameter 2 [mm]: 70
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Height [mm]: 149
• Thread Size: Purge M8x1.25
• Diameter 3 [mm]: 62
• Diameter 4 [mm]: 71
• Fuel Type: Diesel
• Outer Diameter [mm]: 84
• Filter type: Spin-on Filter
• Internal Thread 2 [mm]: M16x1.5
• Manufacturer: DRIVE

• Outer Diameter 1 [mm]: 62
• Thread Size 1: M16X1.5
• Height [mm]: 156
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 158
• Thread Size: M16x1
• Outer Diameter [mm]: 81
• Manufacturer: FAST

• Construction Year from: 07.1999
• Engine Code: 8140-63
• Filter type: Spin-on Filter
• Height [mm]: 154
• Outer Diameter [mm]: 87
• Inner Diameter 1 [mm]: 70
• Inner Diameter 2 [mm]: 63
• Thread Size: M 16x1,5
• Weight [kg]: 0.41
• Manufacturer: VALEO
• Name: VA 587700

• Height [mm]: 151
• Outer Diameter [mm]: 78
• Packing Type: Box
• Filter type: Spin-on Filter
• Thread Size 1: M 16 x 1.5
• Packaging length [cm]: 8.7
• Packaging width [cm]: 8.7
• Packaging height [cm]: 17.5
• Sealing Ring Diameter from [mm]: 61
• Sealing Ring Diameter up to [mm]: 71
• Name: CH CFF100111
• Manufacturer: CHAMPION

• Filter type: Spin-on Filter, with water drain screw
• Height [mm]: 150
• Outer Diameter [mm]: 81
• Internal Thread Size: M16 x 1,5
• Seal Diameter [mm]: 69
• Weight [kg]: 0.436
• Name: KšTUSEFILTER
• Manufacturer: BLP
• Additional information: ADZ92302
• Lisainfo: ADZ92302

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 81
• Seal Diameter [mm]: 70
• Thread Size: M16x1,5
• Height [mm]: 152
• Manufacturer: HENGST FILTER
• Lisainfo: H70WK02
• Additional information: H70WK02

• Filter type: Spin-on Filter
• Fuel Type: Diesel
• Height [mm]: 155
• Outer Diameter [mm]: 85
• Seal Diameter [mm]: 70
• for OE number: 116760469600
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: Spin-on Filter
• Fuel Type: Diesel
• Height [mm]: 152
• Outer Diameter [mm]: 85
• Seal Diameter [mm]: 62
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: Spin-on Filter
• Height [mm]: 155
• Thread Size: M16x1.5
• Outer Diameter 1 [mm]: 84.5
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Height [mm]: 160
• Thread Size: M16x1,5 mm
• Outer Diameter [mm]: 84
• Lisainfo: (kvaliteediklass: PJ)
• Name: Fuel filter
• Quality class: PJ
• Additional information: (kvaliteediklass: PJ)

• Filter type: Spin-on Filter
• Gasket inner diameter: 61
• Seal Ring Outer Diameter: 70
• Height [mm]: 158
• Outer Diameter [mm]: 81
• Thread Size Exit: M 16 X 1.5
• SVHC: 7439-92-1; Lead
• Manufacturer: MANN FILTRY

• Filter type: Spin-on Filter, with water drain screw
• Height [mm]: 150
• Outer Diameter [mm]: 81
• Internal Thread Size: M16 x 1,5
• Seal Diameter [mm]: 69
• Weight [kg]: 0.436
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Hydraulic
• Manufacturer: SNR
• Name: SN GT355.47

• Engine Code: 8140.63.2585
• Height [mm]: 155
• Fuel Type: Diesel
• Filter type: Spin-on Filter
• Outer Diameter [mm]: 85
• Thread Size: M 16X1,5
• Manufacturer: MAGNETI MARELLI

• Width [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Outer Diameter [mm]: 84
• Thread Size: M16x1,5
• Height [mm]: 160
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
SANTANA (32B), 08.81
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
SANTANA (32B), 08.81
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 63.7
• Width [mm]: 34
• Diameter [mm]: 63.7
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Fitting Position: Front Axle
• Thickness [mm]: 20.3
• Length [mm]: 165
• Width [mm]: 66
• Brake System: Brembo
• WVA Number: 29121
• Manufacturer: JAPKO

• Article number of recommended accessories: 98028500
• Fitting Position: Rear Axle
• Height [mm]: 66.3
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Width [mm]: 165
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Inner brake drum diameter [mm]: 170
• Width [mm]: 45
• Brake System: BREMBO
• Blade Thickness [mm]: 6
• Base Plate Thickness [mm]: 2.5
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 5,500, 6,000, 6,500
• Manufacturer Restriction: BREMBO
• Height [mm]: 67.9
• Thickness [mm]: 20.2
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 260
• Supplementary Article/Info 2: with brake caliper screws
• Width [mm]: 165
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Driven Units: Camshaft
• Trim Level: HSN
• for OE number: 5001847819
• Number of Teeth: 153
• Width [mm]: 30
• Name: HAMMASRIHM
• Manufacturer: DAY

• Construction Year to: 06.2001
• Fitting Position: Front Axle
• Width [mm]: 164.6
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Wear Warning Contact: incl. wear warning contact
• Brake System: Brembo
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Rear Axle
• Width [mm]: 165
• Height [mm]: 66.3
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Filter type: Spin-on Filter
• Diameter [mm]: 79
• Height [mm]: 198
• Thread Size: 3/8"x16
• Diameter 2 [mm]: 21.5
• Seal Diameter [mm]: 17
• Packaging height [cm]: 21
• Net Weight [g]: 283
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Manufacturer: KNECHT

• Number of Teeth: 153
• Length [mm]: 1,457
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Driven Units: Camshaft
• Number of Teeth: 152
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.26
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4865, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 153
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,457
• Observe technical data:
• Manufacturer: GATES

• Fitting Position: Front Axle
• FMSI Code: D1487-8687
• Test Mark: E9 90R-01841/2908
• WVA Number: 29121
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 164.9
• Width 2 [mm]: 164.5
• Height 1 [mm]: 66.3
• Height 2 [mm]: 66.3
• Thickness 1 [mm]: 20
• Thickness 2 [mm]: 20
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1616

• Fitting Position: Rear Axle, Front Axle
• Brake System: BREMBO
• Width [mm]: 165
• Height [mm]: 66.4
• Thickness [mm]: 20
• WVA Number: 29121
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.56
• Manufacturer: VALEO
• Name: VA 301029

• Fitting Position: Front Axle
• Number of pads: 4
• Thickness [mm]: 19.5
• Length [mm]: 164.5
• Height [mm]: 66.4
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: Brembo
• WVA Number: 29121
• Name: SK VKBP90130
• Manufacturer: SKF

• Parameter: DP1010.10.0845
• Fitting Position: Front Axle
• Thickness [mm]: 20.1
• Length [mm]: 164.5
• Height [mm]: 66.6
• Brake System: Brembo
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 164.7
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 29121
• Brake System: Brembo
• Article number of recommended accessories: MBA1768
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.44
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Thickness [mm]: 20
• Width [mm]: 164.6
• Height [mm]: 66.6
• Brake System: BREMBO
• Manufacturer: OPTIMAL ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle, Rear Axle
• Gross vehicle weight [kg]: 3,500, 5,000
• Block Separation:
• Article number of recommended accessories: 1 987 474 709
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 29121
• Number of bolts/screws: 4
• Thickness [mm]: 17
• Width [mm]: 164.5
• Height [mm]: 66.6
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle, Rear Axle
• Width [mm]: 165
• Height [mm]: 66.3
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle, Rear Axle
• Parameter: DP1010.10.1046
• Thickness [mm]: 20.1
• Length [mm]: 164.5
• Height [mm]: 66.6
• Wear Warning Contact: incl. wear warning contact
• Brake System: Brembo
• Warning Contact Length [mm]: 260
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 3,500, 5,000
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 29121
• Test Mark: E1 90R-01812/077
• Length [mm]: 164.6
• Thickness [mm]: 20
• Height [mm]: 66.6
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle, Rear Axle
• Article number of recommended accessories: 98028500
• Width [mm]: 165
• Thickness [mm]: 20
• Height [mm]: 66
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 29121
• Name: BR P A6 017
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 3,500, 5,000
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 29121
• Test Mark: E1 90R-01812/077
• Length [mm]: 164.6
• Thickness [mm]: 17
• Height [mm]: 66.6
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle, Rear Axle
• Number of pads: 4
• Thickness [mm]: 19.5
• Length [mm]: 164.6
• Height [mm]: 66.4
• Wear Warning Contact: incl. wear warning contact
• Brake Pad: Without Bevelled Edges
• Brake System: Brembo
• WVA Number: 29121
• Name: SK VKBP80422E
• Manufacturer: SKF

• Construction Year to: 06.2001
• Fitting Position: Rear Axle
• Width [mm]: 164.6
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Brembo
• Test Mark: E1 90R-011136/1073
• MAPP code available:
• Article number of recommended accessories: 24.8190-1304.2, 24.8190-0833.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 252-251, 8DZ 355 205-401
• Width [mm]: 164.7
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 29121
• Brake System: Brembo
• Weight [kg]: 2.44
• Name: HE 8DB355005371
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Article number of recommended accessories: 98028500, 82519900
• Width [mm]: 164.7
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 29121
• Quality: T3035
• Brake System: Brembo
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.44
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 5,500, 6,000, 6,500
• Wear Warning Contact: incl. wear warning contact
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 29160
• Thickness [mm]: 19.6
• Width [mm]: 164.7
• Height [mm]: 67.8
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: incl. wear warning contact
• Test Mark: E9 90R - 01705/025
• Height [mm]: 66.5
• Width [mm]: 164.8
• Thickness [mm]: 20.2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Manufacturer Restriction: Stanadyne
• Filter type: with water separator, Spin-on Filter
• Height [mm]: 173
• Outer Diameter [mm]: 83
• Outer Diameter 1 [mm]: 69
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 5,500, 6,000, 6,500
• Manufacturer Restriction: BREMBO
• Width [mm]: 164.8
• Height [mm]: 67.9
• Thickness [mm]: 20.2
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 260
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R - 01705/025 E
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 5,500, 6,000, 6,500
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 29160
• Test Mark: E20 90R-02A0130/016
• Length [mm]: 164.8
• Thickness [mm]: 20.2
• Height [mm]: 67.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Number of Teeth: 152
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 1.45
• Manufacturer: DOLZ
• Name: DO SKD130

• Fitting Position: Front Axle
• Brake System: BREMBO
• Width [mm]: 165
• Height [mm]: 67
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle, Rear Axle
• Thickness [mm]: 20.3
• Width [mm]: 165
• Height [mm]: 66
• Weight [kg]: 2.47
• Number of wear indicators [per axle]: 0
• Height 1 [mm]: 66
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: BREMBO
• Packing Type: Box
• WVA Number: 29121
• Packaging length [cm]: 20
• Packaging width [cm]: 11.5
• Packaging height [cm]: 10.5
• Number of threaded bolts: 4
• Manufacturer: JURID

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 152
• Width [mm]: 30
• Length [mm]: 1,448
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth 1: 152
• Manufacturer: SNR
• Name: SN KD455.35

• Number of Teeth 1: 152
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Construction Year to: 06.2001
• Fitting Position: Front Axle
• Width [mm]: 164.6
• Height [mm]: 66.5
• Thickness [mm]: 20.3
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 260
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Brembo
• Test Mark: E1 90R-011136/1073
• MAPP code available:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

• Belt Width [mm]: 30
• Colour: black
• Number of Teeth: 152
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMA 02383 SKF
• Additional information: VKMA 02383 SKF

• Driven Units: Camshaft
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4865, STT-1
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Number of Teeth: 125
• Length [mm]: 1,457
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 2
• Supplementary Article/Info 2: without tensioner element
• Manufacturer: BOSCH

• Alternatively:
• Number of Teeth 1: 152
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Number of Teeth: 153
• Length [mm]: 1,457
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 3
• Manufacturer: BOSCH

Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.43
• Number of Teeth: 152
• Width [mm]: 30
• Supplementary Article/Info 2: without tensioner pulley damper
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Width [mm]: 29.8
• Belt Material: PTFE (polytetrafluoroethylene)
• Colour: black
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth: 152
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF
• Name: SK VKMA02983

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.59
• Number of Teeth: 152
• Width [mm]: 30
• Supplementary Article/Info 2: with tensioner pulley damper
• Alternatively:
• Technical Information: Please note: Technical Info in the attachment
• Manufacturer: CONTITECH