• Construction Year from: 12.1997
• Exhaust System: for pre-catalytic converter
• for OE number: 46521170
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 610
• Number of pins: 4
• Weight [g]: 104
• Gross Weight [g]: 134
• Name: DN DOX-1548
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
DELTA II (836), 06.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
DELTA II (836), 06.9
(kvaliteediklass: Q)"

• Thread Size: M14x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: 182 A4.000
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• for OE number: 71728656
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• Fabrication Number: ECT-FT-000
• Manufacturer: NTY
• Name: NTY ECT-FT-000

• Engine Code: 182 A4.000
• Cable Length [mm]: 730
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Housing Colour: black
• Number of pins: 3
• Thread Size: M12
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10374

• Pressure from [kPA]: 20
• Pressure to [kPA]: 10
• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 182 A4.000
• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 3
• Socket colour: black
• Spanner Size: 21
• Thread Size: M12x1.5
• for OE number: 46474712
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Pressure from [kPA]: 15
• Pressure to [kPA]: 10
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Thread Size: M12 x 1,5
• Number of pins: 3
• Manufacturer: ERA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, inner
• for OE number: 40555010
• New Part:

• Number of pins: 4
• Name: OHUSURVEANDUR,
• Manufacturer: MAX

• Engine Code: 182 A4.000
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.115, 1.880.117, 1.880.118, 1.880.119, 1.880.121, 1.880.122, 1.880.149, 1.880.150, 1.880.151, 1.880.181, 1.880.189, 1.880.190, 1.880.495, 1.880.497

• Voltage [V]: 12
• Length [mm]: 715
• Number of pins: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV291

Manufacturer: MAGNETI MARELLI

• Engine Code: 182 A4.000
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV100

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: MEAT&DORIA

• Engine Code: 182 A4.000
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 21
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Number of pins: 3
• Connector Shape: rectangular
• Colour: black
• for OE number: 7700706876
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 02.1997
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV107

• for OE number: 77363792
• Required quantity: 1
• Manufacturer: BRM

Name: CZUJNIK CI—N. POWIETRZA FIAT BRAVO, PALIO, MULTIPLA, STILO 95-

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,000
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Cable Length [mm]: 590
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of pins: 3
• Housing Colour: grey
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Voltage [V]: 12
• Resistor [Ohm]: 1,350
• Tolerance [%]: 10
• Cable Length [mm]: 720
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009146431

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 730
• Manufacturer: FAST

• Construction Year from: 12.1997
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 700
• Weight [kg]: 0.08
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Colour: black
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.064
• Alternative Repair Kit: 550140
• Manufacturer: ERA

• Construction Year from: 12.1997
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 1,350
• Weight [kg]: 0.1
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Length [mm]: 400
• Alternatively:
• Number of pins: 3
• Housing Colour: white
• Weight [kg]: 0.048
• Alternative Repair Kit: 550094
• Resistor M[ohm]: 1.8
• Manufacturer: ERA

• Engine Code: 182 A4.000
• Length [mm]: 730
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Voltage [V]: 12
• Number of pins: 3
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 213
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114311
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Cable Length [mm]: 660
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 4
• Weight [kg]: 0.028
• Alternative Repair Kit: 550125
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 20
• for OE number: 46481306
• Manufacturer: MEAT&DORIA

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.21
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: 182 A4.000
• Length [mm]: 76.5
• Width [mm]: 65
• Height [mm]: 30
• Weight [kg]: 0.03, 0.061
• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• for OE number: 71728656
• Manufacturer: MEAT&DORIA

• Pressure [Pa] from: 15,000
• Pressure [Pa] to: 105,000
• Voltage [V]: 5
• Number of pins: 4
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with gaskets/seals
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 550
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221361
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 720
• Manufacturer: FAE

• Engine Code: 182 A4.000
• Length [mm]: 200
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: 182 A4.000
• Number of pins: 3
• Pressure from [kPA]: 20
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10226

• Sensor Type: Passive sensor
• Cable Length [mm]: 1,000
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MEY

• Cable Length [mm]: 200
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Construction Year from: 12.1997
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Length [mm]: 630
• Resistor [Ohm]: 6
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 630
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM095

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 100,000
• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 182 A4.000
• Number of pins: 4
• Pressure from [kPA]: 17
• Pressure to [kPA]: 104
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 02.1997
• Engine Code: 182 A4.000
• Voltage [V]: 12
• Length [mm]: 610
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: 182 A4.000
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Connector Shape: oval
• Number of pins: 4
• Thread Size: M18 x 1,5
• Weight [kg]: 0.149
• for OE number: 46 521 170
• Cable Length [mm]: 550
• Socket colour: black
• Length [mm]: 650
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 4
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 182 A4.000
• Name: EP 1.995.083
• Manufacturer: EPS

• Construction Year from: 01.1998
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 630
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: 182 A4.000
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year from: 12.1997
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 02.1997
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV594
• Manufacturer: ESEN SKV

• Engine Code: 182 A4.000
• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Name: EP 1.993.001
• Manufacturer: EPS

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Operating Mode: Pneumatic
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Construction Year from: 12.1997
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 630
• Name: LAMBDA ANDUR
• Manufacturer: PIE