Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Left
- Vehicle Identification Number (VIN) from: B00379
-
for OE number: C2P8810,
C2C22681 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 300
- Number of pins: 4
- Weight [g]: 90
- Gross Weight [g]: 123
- Manufacturer: DENSO
-
Name: DN DOX-
0426
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
Additional information: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"
- Fitting Position: Left
- Vehicle Identification Number (VIN) from: B00379
- for OE number: C2C22679
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 480
- Number of pins: 4
- Weight [g]: 95
- Gross Weight [g]: 128
- Manufacturer: DENSO
-
Name: DN DOX-
0427
Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
S-TYPE (CCX), 01.99-
(kvaliteediklass: Q)"
Manufacturer: MAGNETI MARELLI
Manufacturer: MAGNETI MARELLI
- Number of pins: 2
- Connector Shape: oval
- Socket colour: green
-
Thread Size: M12x1,
5 - Sensor Type: NTC Sensor
- Spanner Size: 19 mm
-
for OE number: XM34 12A648 AA,
LNA1600AA, 13650 61B00 - Manufacturer: MEAT&DORIA
-
Thread Size: M 12x1,
5 - Number of pins: 2
- Colour: grey
- Supplementary Article/Supplementary Info: with seal
- Power [W]: 0.06
- Manufacturer: METZGER
Manufacturer: MAGNETI MARELLI
- Number of pins: 2
- Housing Colour: grey
-
Thread Size: M 12x1,
5 - Manufacturer: FAE
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Fitting Position: Left
- Required quantity: 1
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: BREMI
- Housing Type: without housing
-
Fabrication Number: EPP-
SB- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda Sensor: Diagnostic Probe
- Number of circuits: 4
- Supplementary Article/Info 2: without plug
- Manufacturer: ENERGY
- for OE number: 442 7657
- Cable Length [mm]: 190
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 29
- Connector Shape: oval
- Weight [kg]: 0.037
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Left
- Required quantity: 1
- for OE number: 436 2957
- Cable Length [mm]: 140
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 29
- Connector Shape: oval
- Weight [kg]: 0.03
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: Front
- Vehicle Identification Number (VIN) from: B32753
- Length [mm]: 875
- Number of connectors: 4
- Manufacturer: VERNET
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: MAGNETI MARELLI
- Vehicle Identification Number (VIN) from: B00379
- Vehicle Identification Number (VIN) to: B32752
-
Engine Code: AJ-
V8 -
for OE number: 22204-
46020 - Quality: OE
- Operating Mode: Electric
- Number of pins: 5
- Gross Weight [g]: 79
- Manufacturer: DENSO
-
Name: DN DMA-
0114 - Quality class: Q
Additional information: "Tootja: DENSO
FORESTER (SG), 07.02
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
FORESTER (SG), 07.02
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks