• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Number of pins: 4
• Fitting Position: Front, Right
• Manufacturer: KAMOKA

• Fitting Position: Front, Left
• Manufacturer: KAMOKA

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Right
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Left
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Front Axle Right
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Fabrication Number: ECX-AU-012
• paired article number: ECX-AU-011
• Manufacturer: NTY
• Name: NTY ECX-AU-012

• Fitting Position: Front Axle Left
• Fabrication Number: ECX-AU-011
• paired article number: ECX-AU-012
• Manufacturer: NTY

• Fitting Position: Rear, Left
• Manufacturer: KAMOKA

• Fitting Position: Rear, Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Number of pins: 4
• Fabrication Number: ECX-AU-041
• Manufacturer: NTY

• Fitting Position: Left Rear
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with coupling rod
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Fitting Position: Front Axle Right
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Fabrication Number: ECX-AU-010
• Manufacturer: NTY
• Name: NTY ECX-AU-010

• Number of pins: 4
• Fitting Position: Rear, Left
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Fabrication Number: ECX-AU-013
• Manufacturer: NTY
• Name: NTY ECX-AU-013

• Fitting Position: Rear Axle Left
• Number of pins: 4
• Fabrication Number: ECX-AU-022
• Manufacturer: NTY
• Name: NTY ECX-AU-022

• Fitting Position: Front Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Front Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• paired article number: 17SKV430
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV429
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle, Right
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• paired article number: 17SKV429
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV430
• Additional information: SKV17SKV430
• Lisainfo: SKV17SKV430

• Spring Type: for vehicles without air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spring Type: for vehicles without air suspension
• Number of pins: 4
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX
• Lisainfo: 27-1999
• Additional information: 27-1999

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Rear Axle, Right
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• paired article number: 17SKV428
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV431

• Fitting Position: Front Axle Right
• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• paired article number: 17SKV431
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV428

• Fitting Position: Left Rear
• General Information: Height level sensor; rear left
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.21
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV710

• Fitting Position: Front Axle
• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• paired article number: 623 146
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Right
• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Spring Type: for vehicles without air suspension
• Fitting Position: Rear Axle Left
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• Manufacturer: ENERGY

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle, Right
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Fitting Position: Front Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without electronic suspension control
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle, Left, only fitted on one side
• Quantity per axle: 1
• Housing Colour: black
• Number of pins: 4
• Sensor Type: Lever Sensor
• Connector Shape: D Shape
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

Housing material: Plastic, PA 66 GF 30, GRP (Glass fibre Reinforced Plastic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle, Left
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Number of pins: 4
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle, Right
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle, Left
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• paired article number: 623 144
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV561

• Fitting Position: Left Front
• General Information: Height level sensor; front left
• Manufacturer: VIKA

• Fitting Position: Right Front
• General Information: Height level sensor; front right
• Manufacturer: VIKA

• Fitting Position: Right Rear
• General Information: Height level sensor; rear right
• Manufacturer: VIKA

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle, Right
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

• Fitting Position: Left Rear
• General Information: Height level sensor; rear left
• Manufacturer: VIKA

• Fitting Position: Left Front
• General Information: Height level sensor; front left
• Manufacturer: VIKA

• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle, Right
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• paired article number: 623 145
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Number of connectors: 4
• Connector Shape: D Shape
• Manufacturer: ERA

• Fitting Position: Rear Axle Right
• Number of connectors: 4
• Manufacturer: ERA

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle Left
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 8R0941309E
• Manufacturer: MEAT&DORIA

• Fitting Position: Left Front
• Spring Type: for vehicles with air suspension
• paired article number: RH-3587
• Manufactured in: China
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.3
• Net weight [kg]: 0.2
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Fitting Position: Right Front
• Spring Type: for vehicles with air suspension
• paired article number: RH-3588
• Manufactured in: China
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.3
• Net weight [kg]: 0.2
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Fitting Position: Right Rear
• Spring Type: for vehicles with air suspension
• paired article number: RH-3590
• Manufactured in: China
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.4
• Net weight [kg]: 0.2
• replacement in pairs recommended:
• Manufacturer: ARNOTT

• Fitting Position: Left Rear
• paired article number: RH-3589
• Manufactured in: China
• Packaging length [cm]: 21
• Packaging width [cm]: 11.5
• Packaging height [cm]: 11.5
• Weight [kg]: 0.4
• Net weight [kg]: 0.2
• replacement in pairs recommended:
• Manufacturer: ARNOTT