Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Name: Radiator
- Quality class: P
Lisainfo: A4 (kvaliteediklass PJ)
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Name: USZCZELKA KORKA ZBIORNIKA WYRàWNAWCZEGO VW
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Main Expansion Tank
- Quantity per packing unit: 25
- Inner Diameter [mm]: 28.3
- Outer Diameter [mm]: 32.1
- Thickness [mm]: 3.9
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 470
- Core Width [mm]: 720
- Core Depth [mm]: 36
- Radiator type: Brazed cooling fins
-
Name: Radiaator,
mootorijahutus - Manufacturer: MAX
- Lisainfo: AC266808
- Additional information: AC266808
- Radiator type: Brazed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Manufacturer: KAMOKA
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 720*474*36
- Additional information: 720*474*36
- Construction Year to: 11.2015
-
Engine Code: CTCC,
CZVB - Vehicle Equipment: for vehicles with automatic climate control
- Core Length [mm]: 720
- Core Width [mm]: 468
- Core Depth [mm]: 34
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1618
- Manufacturer: MAGNETI MARELLI
- Vehicle Equipment: for vehicles with air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with top,
without expansion tank -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
-
Name: Radiaator,
mootorijahutus - Manufacturer: NIS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI
- Vehicle Equipment: for vehicles with air conditioning
- Cooling fins material: Aluminium
- Core Depth [mm]: 36
- Core Length [mm]: 720
- Core Width [mm]: 468
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 38
- for OE number: 8K0121251H
-
Weight [g]: 4,
620 -
Gross Weight [g]: 6,
300 -
alternative item: -
- Manufacturer: DENSO
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 4,
840 - Packaging height [cm]: 62.5
- Packaging length [cm]: 99
- Name: MH CR911000P
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Automatic Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 5,
104 - Packaging height [cm]: 63
- Packaging length [cm]: 99.5
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A4
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks