Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)




-
Fitting Position: Front Axle Left,
Front Axle Right -
Lisainfo: Ball bearing for strut bearing,
upper -
Additional information: Ball bearing for strut bearing,
upper


- Fitting Position: Front Axle
- SVHC: No SVHC present!
-
Name: Laager,
amorditugilaager - Manufacturer: FAG


- Installatsiooni pool: esisild mõlemapoolselt
- Välisläbimõõt [mm]: 37
- Name: Top mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"


- Vehicle Equipment: for vehicles with air conditioning
-
Vehicle Identification Number (VIN) from: F 89-
J- 373 599, 8A- L- 038 758* -
Vehicle Identification Number (VIN) to: 8A-
L- 038 757*, 89- J- 373 598 -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 14
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: DELLO AUTOMEGA


-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Alternative Repair Kit: 80001653
- Weight [kg]: 0.18
- Name: COC 80000243
- Manufacturer: CORTECO



-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Inner Diameter [mm]: 14
-
Name: Laager -
Kndmik. VW P. A80/ PASS - Manufacturer: MAX


- Fitting Position: Front Axle
- OE-numbri jaoks: 191 412 249
- Installatsiooni pool: esisild mõlemapoolselt
- Piirangutega toode/piirangu info 2: koos laagriga
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3
(kvaliteediklass: PJ)"


-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP


- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
for OE number: 823 412 249,
SE 021 156 017 A -
Name: Laager -
Kndmik VW PASSAT/ A80/ IBIZA 86- 93 - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!




-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Weight [kg]: 0.25
- Name: COC 21652956
- Manufacturer: CORTECO



- Suspension: for vehicles without sports suspension
- Installatsiooni pool: Esisild
- Manufacturer: DENCKERMANN AMORTYZATORY




-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut with bearing,
front -
Additional information: Bearing for strut with bearing,
front


- old version:
- Thickness [mm]: 41
- Inner Diameter [mm]: 14
- Colour: black
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. AUDI P. 80, 90/ VW PASSAT 1.3-2.8 08.78-08.00 WYS. 37MM LE/PR Z O½YSKIEM


- old version:
- Thickness [mm]: 41
- Inner Diameter [mm]: 14
- Colour: black
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Name: SW 30 54 0007
- Manufacturer: SWAG
- Lisainfo: 30 54 0007 SWA
- Additional information: 30 54 0007 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- new version:
- Inner Diameter [mm]: 14
- Height [mm]: 37
- Colour Coding: green
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. AUDI P. 80, 90/ VW PASSAT 1.3-2.8 08.78-08.00 WYS. 37MM LE/PR Z O½YSKIEM


- Fitting Position: Front Axle
- Height [mm]: 41
- Replace in pairs only:
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 814007310


- new version:
- Height [mm]: 37
- Inner Diameter [mm]: 14
- Colour Coding: green
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.246
- Supplementary Article/Info 2: with ball bearing
- Name: SW 30 54 0005
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Manufacturer: KYB
- Additional information: SM1702
- Lisainfo: SM1702
Technical Information: Suspension mounting w/ integrated suspension bearing Name: Laager - Kndmik. AUDI P. 80, 90, CABRIOLET, COUPE/ VW PASSAT, SANTANA 1.3-2.8 08.78-08.00 LE/PR


- Fitting Position: Front Axle
- OE-numbri jaoks: 8AO 412 323 B
- Installatsiooni pool: esisild mõlemapoolselt
- Piirangutega toode/piirangu info 2: koos laagriga
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 80/VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/VW PASSAT
(kvaliteediklass: PJ)"



-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without rolling bearing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Fitting Position: Front Axle
- Thickness [mm]: 37
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal - Colour Coding: green
- Required quantity: 2
- Manufacturer: TRW AMORTYZATORY
for OE number: 811 412 323, 811 412 323 B, 811 412 323 C, 811 412 323 D, 811 412 355, 811 412 365, 857 412 323 A, 857 412 323 B, 8A0 412 323 B, 8A0 412 323 D SVHC: No information available, please contact the manufacturer!


- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- reinforced version:
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. A80/ - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.


- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Supplementary Info: with integrated ball bearing
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!


- Number of Parts [parts]: 1
- Supplementary Article/Info 2: with rolling bearing
- Width 1 [mm]: 34
- Outer Diameter 1 [mm]: 75
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Fitting Position: Front Axle Right,
Front Axle Left -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.02


- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Supplementary Info: with integrated ball bearing
-
Name: Laager -
Kndmik. VW P. A80/ PASS - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!


- Fitting Position: Front Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Name: SK VKDC35100
- Manufacturer: SKF



- Alternatively:
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Supplementary Article/Supplementary Info: with integrated ball bearing
-
for OE number: 8A0 412 323 B,
8A0 412 323 D -
Name: Laager -
Kndmik. VW P. A80 91- 94 - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!



- Alternatively:
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Supplementary Article/Supplementary Info: with integrated ball bearing
-
for OE number: 8A0 412 323 B,
8A0 412 323 D -
Name: Laager -
Kndmik. VW P. A80/ PASS - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!





- Inner Diameter [mm]: 14
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
244652 - Quality class: Q









- Fitting Position: Front Axle
- Suspension: for vehicles without heavy duty suspension
- Supplementary Article/Info 2: with bearing
- Guarantee: 5 years guarantee
- Weight [kg]: 0.3
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Packaging height [cm]: 9
- Manufacturer: MONROE




- Fitting Position: Front Axle
-
Material: Rubber/
Metal - Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
117475 - Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"