Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission ID: 0B3
-
API specification: GL-
5 - Colour: yellow
- Capacity [litre]: 1
-
SAE viscosity class: 75W-
90 - Weight [kg]: 0.9
- Observe service information:
- Name: KASTIOLI
- Manufacturer: FEB
- Additional information: F32590
- Lisainfo: F32590
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 0AW
- Colour of operating fluid: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.945
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 0B3
- Colour: yellow
- Capacity [litre]: 1
-
SAE viscosity class: 75W-
80 - Weight [kg]: 0.967
- Observe service information:
- Name: KIGUKASTOLI
- Manufacturer: FEB
- Lisainfo: 40580 FEBI
- Additional information: 40580 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 0AW
- Colour of operating fluid: yellow
- Capacity [litre]: 1
- Weight [kg]: 0.945
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 0B3
-
API specification: GL-
4 - Capacity [litre]: 1
-
SAE viscosity class: 75W-
80 - Weight [kg]: 0.85
- Observe service information:
-
Manufacturer: FEBI-
OLEJE
Specification: BMW MTF LT-3, Fiat 9.55550-MX3, Fiat 9.55550-MZ1, Ford M2C200-C, JWS 227, LAND ROVER MTF-94, NISSAN MT-XZ TYP TL, NISSAN MT-XZ TYP JR, NISSAN MT-XZ, PSA B71 2330, Volvo 97308, VW 501 50, Ford M2C200-C2, Ford M2C200-C3 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 0B3
- Quantity per packing unit: 12
-
Oil manufacturer recommendation: MIL-
L- 2105 E, G 052 145 S2, 235.8 - Packing Type: Bottle
- Length [mm]: 60
- Transmission Type: for manual transmission
- Colour: yellow
- Height [mm]: 225
- Capacity [litre]: 1
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Oil: Full Synthetic Oil
- Observe service information:
- Width [mm]: 115
- Weight [kg]: 0.9
- Quantity Unit: Box
-
API specification: GL-
4, GL- 5, MT- 1 -
SAE viscosity class: 75W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: CVT automatic transmission
(stepless) - Quality: ZF LifeGuardFluid
- Specification: CVT 1
- Packing Type: Bottle
- Capacity [litre]: 1
- Name: Automaatkigukasti oli
- Manufacturer: ZF
SVHC: No information available, please contact the manufacturer!
-
Transmission Type: Dual-
Clutch Transmission - Colour: brown
- Capacity [litre]: 1
- Chemical Properties: Synthetic
-
Recommended change interval [km]: 60,
000 - Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Recommended change interval [years]: 5
-
Article number of recommended accessories: V10-
3025, V10- 3223 - Length [mm]: 60
- Width [mm]: 115
- Height [mm]: 225
- Quantity Unit: Litre
-
Article number of the recommended special tool: V99-
1017 - Transmission Code: DSG
- Packing Type: Bottle
- Weight [kg]: 1.17
- Manufacturer: VAICO
Oil manufacturer recommendation: Ford WSS-M2C936-A, BMW MTF LT-5, Dia Queen SSTF-I, PSA DCS 6-speed, VW TL 521 82, Pentosin FFL-4, MB 236.21, Renault BOT 450, PSA 6DCT451, BMW DCTF-1, Pentosin FFL-3, Ford WSS-M2C-200-D2, Renault EDC 6-speed, VW TL 525 29-C, MTF-LT-5 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Packing Type: Bottle
- Capacity [litre]: 1
- Colour: yellow
- Chemical Properties: Synthetic
- Manufacturer Approval: TF DSG
- Manufacturer: AIC
Transmission Type: for dual-clutch transmission, not for CVT automatic transmission (stepless) Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Transmission Number: 0AW 1/
1 -
Article number of recommended accessories: V10-
3231, V30- 2253, V30- 2252 -
Transmission Type: CVT automatic transmission
(stepless) - Width [mm]: 115
- Colour: yellow
- Chemical Properties: Synthetic
- Capacity [litre]: 5
- Weight [kg]: 4.52
-
Recommended change interval [km]: 60,
000 - Observe the vehicle manufacturer specifications:
- Recommended change interval [years]: 5
- Observe system fill quantity:
- Packing Type: Canister
- Height [mm]: 230
- Length [mm]: 300
-
Article number of the recommended special tool: V99-
1017 - Manufacturer: VAICO
-
Additional information: V60-
0211 VEMO -
Lisainfo: V60-
0211 VEMO
Oil manufacturer recommendation: VW TL 521 80, BMW EZL799/-A, AMMIX CVTF-DC/-DFE, MB 236.20, TOYOTA TC, Subaru Lineart CV-30, TOYOTA CVT FE, ATF CVT, VW TL 525 16, SUBARU E-CVT, FORD CVT23, SUBARU CVTF II, CHRYSLER CVTF+4, Ford MERCON C, DODGE/JEEP NS-2/CVTF, SUZUKI CVT Green 1, SUZUKI CVT Green 2, SUBARU CV-30, MAZDA CVTF 3320, MITSUBISH CVTF-J1/J4, SUZUKI TC, HONDA HCF-2, SUZUKI NS-2, NISSAN NS-1, GM DEX-CVT, HYUNDAI/KIA SP-CVT1, NISSAN NS-2, SUZUKI CVTF 3320, GM HP CVTF, NISSAN NS-3, SUBARU iCVT General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks