Lisainfo: Brake pad set, rear, 16.6 mm

• Driven Units: Camshaft
• Vehicle Identification Number (VIN) from: 85E000 001
• Length [mm]: 1,143
• Width [mm]: 18
• Number of Teeth: 120
• Lisainfo: Timing Belt
• Additional information: Timing Belt

• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 85
• Kõrgus (mm): 169
• keermemõõt, sissepääs: M 14 x 1,5 mm
• keermemõõt, väljapääs: M 14 x 1,5 mm
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 18
• Number of Teeth: 120
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.09
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 88
• Kõrgus (mm): 172
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 84
• Keermemõõt: M 12 X 1,50
• Kõrgus (mm): 150
• OE-numbri jaoks: 893133511
• Manufacturer: MEAT & DORIA

• Ühenduskeere: M14x1,5
• Läbimõõt [mm]: 86
• Piirangutega toode/piirangu info: koos tihenditega
• Filtritüüp: Keeratav filter
• Keermemõõt: M14X1,5
• Kõrgus (mm): 173,3
• Korpuse materjal: Metall
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Filtritüüp: Ühendusfilter
• Pikkus (mm): 172
• Välisläbimõõt [mm]: 88
• Sisekeermemõõde: M14 x 1,5
• Kaal (kg): 0,3
• Manufacturer: FEBI-FILTRY

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 120
• Length [mm]: 1,143
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH PASKI NAPÊDOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.54
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kõrgus 1 (mm): 66,9
• Pidurisüsteem: LUCAS/TRW
• Laius 1 (mm): 87
• Jämedus/Tugevus 1 (mm): 16,5
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.59
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Driven Units: Camshaft
• Number of Teeth: 120
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Brake System: VAG
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Width 1 [mm]: 87
• Height 1 [mm]: 66.9
• Thickness 1 [mm]: 16.5
• Brake System: LUCAS/TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.85
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Driven Units: Camshaft
• Vehicle Identification Number (VIN) from: 85E000 001
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 120
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,143
• Manufacturer: GATES

• Fitting Position: Front Axle
• Width [mm]: 120
• Thickness [mm]: 17
• Height [mm]: 70
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kõrgus 1 (mm): 69,5
• Pidurisüsteem: LUCAS/TRW
• Laius 1 (mm): 118,9
• Jämedus/Tugevus 1 (mm): 16,3
• Manufacturer: PROFIPOWER

• Braking System: for vehicles without brake force regulator
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 30
• Brake Lining: with lining
• Lisainfo: Brake shoe set, without E-mark, 180x30 mm
• Additional information: Brake shoe set, without E-mark, 180x30 mm

• Fitting Position: Rear Axle
• Construction Year from: 09.1986
• Quantity per packing unit: 4
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21144
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP451

• Installatsiooni pool: Tagasild
• Laius (mm): 40
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 200
• Kaal (kg): 1,45
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Height [mm]: 69.6
• Thickness [mm]: 16
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS1625

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Name: BR S 85 508
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D684-7571
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20669
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 119.3
• Width 2 [mm]: 119
• Height 1 [mm]: 69.5
• Height 2 [mm]: 69.5
• Thickness 1 [mm]: 15.8
• Thickness 2 [mm]: 15.8
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Vehicle Identification Number (VIN) to: ******81*H*299000
• for brake disc thickness [mm]: 20
• for brake disc diameter [mm]: 256
• Length [mm]: 118.9
• Width [mm]: 69.5
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.3
• Observe service information:
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Vehicle Identification Number (VIN) to: ******81*H*299000
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Material: Sheet Steel
• Brake Lining: with lining
• Fitting Position: Rear Axle
• Weight [kg]: 1.55
• Manufacturer: FEBI HAMULCE

Braking System: for vehicles with reinforced brakes, for vehicles with brake force regulator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 172
• Välisläbimõõt [mm]: 81
• keermemõõt, sissepääs: M14x1.5
• keermemõõt, väljapääs: M14x1.5
• SVHC: SVHS aineid ei esine
• Manufacturer: FILTRON

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01025/181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Weight [kg]: 1.58
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 176
• Välisläbimõõt [mm]: 80
• Keermemõõt 1: M14x1,5
• Keermemõõt 2: M14x1,5
• Manufacturer: PURFLUX

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 119.3
• Height [mm]: 69.6
• Thickness [mm]: 16
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E1 90R 01024/129
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 80,5
• Kõrgus (mm): 172,5
• keermemõõt, sissepääs: M14x1,5
• keermemõõt, väljapääs: M14x1,5
• pakendi kõrgus [cm]: 18
• Netokaal [g]: 351
• pakendi pikkus [cm]: 9
• pakendi laius [cm]: 9
• Name: KN KL29
• Manufacturer: KNECHT

• Fitting Position: Front Axle
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20669
• Thickness [mm]: 16.5
• Width [mm]: 110
• Height [mm]: 69.5
• Brake System: Lucas-Girling
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 40
• Supplementary Article/Supplementary Info: with wheel brake cylinder
• Mounting Type: not pre-mounted
• Inner brake drum diameter [mm]: 200
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Width [mm]: 18
• Number of Teeth: 120
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.897
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth 1: 120
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Fitting Position: Front Axle
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 2
• Brake System: Lucas / TRW
• Test Mark: E9 90R-02A1251/4450
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Width [mm]: 119
• Height [mm]: 70
• Height 1 [mm]: 70
• Thickness [mm]: 16
• WVA Number: 20168
• Test Mark: R90 Homologated
• Wear Warning Contact: not prepared for wear warning indicator
• Weight [kg]: 1.4
• Packing Type: Carton
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.6
• Number of Teeth: 120
• Width [mm]: 18
• Manufacturer: CONTITECH

• Number of Teeth 1: 120
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer Restriction: VAG
• Mounting Type: Pre-assembled
• Supplementary Article/Supplementary Info: with wheel brake cylinder
• Material: Aluminium
• Test Mark: E1 90R 01195/047
• Piston Diameter [mm]: 15.9
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 85-E-000 001
• Rihmade arv: 1
• Laius (mm): 18
• Hammastehulk: 120
• sisaldab rulle: 1
• Manufacturer: HEPU

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 1.941
• Width [mm]: 18
• Manufacturer: CONTITECH