• Filtritüüp: Keeratav filter
• OE-numbri jaoks: 116760469600
• Kõrgus (mm): 155
• Kütuseliik: Diisel
• Välisläbimõõt [mm]: 85
• Rõngastihendi läbimõõt (mm): 70
• Manufacturer: KAMOKA
• Lisainfo: F300301
• Additional information: F300301

• Length [mm]: 45
• Surface: Zinc-coated
• Weight [kg]: 0.001
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• OE-numbri jaoks: 190658
• Kõrgus (mm): 173
• Kütuseliik: Diisel
• Välisläbimõõt [mm]: 88
• Manufacturer: KAMOKA

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 152
• Kütuseliik: Diisel
• Välisläbimõõt [mm]: 85
• Rõngastihendi läbimõõt (mm): 62
• Manufacturer: KAMOKA

• Läbimõõt [mm]: 85
• Materjal: Plastik
• Filtritüüp: Keeratav filter
• Kõrgus (mm): 154
• Name: DE HDF496
• Manufacturer: DELPHI

• Filter type: Spin-on Filter, with water drain screw
• Height [mm]: 150
• Outer Diameter [mm]: 81
• Internal Thread Size: M16 x 1,5
• Sealing Ring Diameter [mm]: 69
• Weight [kg]: 0.436
• Observe service information:
• Manufacturer: BLUEPRINT
• Additional information: ADZ92302
• Lisainfo: ADZ92302

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: Bosch
• Filter type: Spin-on Filter
• Height [mm]: 151
• Outer Diameter [mm]: 78
• Packing Type: Carton
• Thread Size 1: M 16 x 1.5
• Packaging length [cm]: 8.7
• Packaging width [cm]: 8.7
• Packaging height [cm]: 17.5
• Sealing Ring Diameter from [mm]: 61
• Sealing Ring Diameter up to [mm]: 71
• Name: CH CFF100111
• Manufacturer: CHAMPION

• Filtritüüp: Keeratav filter
• Läbimõõt [mm]: 78
• Kõrgus (mm): 160
• Keermemõõt: M16x1,5
• Läbimõõt 2 (mm): 69
• Rõngastihendi läbimõõt (mm): 62
• Väändejõud [Nm]: 20
• Soovitatava eritööriista tootenumber: OCS 1
• pakendi kõrgus [cm]: 16,6
• Netokaal [g]: 421
• pakendi pikkus [cm]: 8,9
• pakendi laius [cm]: 8,9
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KC18

• Engine Code: CY
• Filtritüüp: Keeratav filter
• Siseläbimõõt 1 [mm]: 62
• Välisläbimõõt 2 [mm]: 80
• Siseläbimõõt 2 (mm): 70
• Keermemõõt: M16 x 1,5
• Kõrgus (mm): 155
• Manufacturer: KOLBENSCHMIDT

• Filtritüüp: Keeratav filter
• Läbimõõt [mm]: 78
• Kõrgus (mm): 160
• Keermemõõt: M16x1,5
• Läbimõõt 2 (mm): 69
• Rõngastihendi läbimõõt (mm): 62
• Väändejõud [Nm]: 20
• Soovitatava eritööriista tootenumber: OCS 1
• pakendi kõrgus [cm]: 16,6
• pakendi pikkus [cm]: 8,9
• pakendi laius [cm]: 8,9
• Manufacturer: MAHLE KNECHT

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 86
• Keermemõõt: M 16 X 1,50
• Kõrgus (mm): 155
• OE-numbri jaoks: 7700700092
• Manufacturer: MEAT&DORIA

• Filtritüüp: Keeratav filter, vee tühjenduskorgiga
• Kõrgus (mm): 150
• Välisläbimõõt [mm]: 81
• Sisekeermemõõde: M16 x 1,5
• Rõngastihendi läbimõõt (mm): 69
• Kaal (kg): 0,436
• Manufacturer: FEBI-FILTRY

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Keeratav filter
• OE-numbri jaoks: 13 32 2 245 006
• Kõrgus (mm): 185
• Kütuseliik: Diisel
• Välisläbimõõt [mm]: 85
• Rõngastihendi läbimõõt (mm): 70
• Manufacturer: KAMOKA

• Filtritüüp: Ühendusfilter, koos veeeraldajaga
• Kõrgus (mm): 176
• Välisläbimõõt [mm]: 89
• Kaal (kg): 0,31
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter, with water separator
• Height [mm]: 176
• Outer Diameter [mm]: 89
• Weight [kg]: 0.37
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 86
• Siseläbimõõt 1 [mm]: 10
• Siseläbimõõt 2 (mm): 8
• Kõrgus (mm): 180
• OE-numbri jaoks: 1H0127401C
• Manufacturer: MEAT & DORIA

• Outer Diameter [mm]: 72
• Width [mm]: 30
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Engine Code: CY
• Filtritüüp: Ühendusfilter
• Välisläbimõõt 1 [mm]: 81
• Väljalase-Ø (mm): 8
• Keermemõõt: 8 mm
• Kõrgus (mm): 177
• Manufacturer: KOLBENSCHMIDT

• Driven Units: Camshaft
• Number of Teeth: 135
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.205
• Width [mm]: 25.4
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 513

• Width [mm]: 27, 33
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.307
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 25
• Number of Teeth: 135
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 135
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,286
• Manufacturer: GATES

• Diameter [mm]: 72
• Width [mm]: 26
• Tensioner Pulley Actuation: Manual
• Name: SK VKM11010
• Manufacturer: SKF

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 19,5
• Laius (mm): 104,4
• Kõrgus (mm): 66,5
• Pidurisüsteem: TRW
• Kaal (kg): 1,14
• Manufacturer: TOMEX

• Outer Diameter [mm]: 72
• Width [mm]: 30
• Height [mm]: 35
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 531007910

• Installatsiooni pool: Tagasild
• Laius (mm): 40
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 200
• Kaal (kg): 1,45
• Manufacturer: TOMEX

• Filtritüüp: Filtrer
• Kõrgus (mm): 152
• Välisläbimõõt [mm]: 80
• Läbimõõt 3 (mm): 62
• Läbimõõt 4 (mm): 72
• Keermemõõt 1: M16x1,5
• Keermemõõt 2: M8x1,25
• Manufacturer: PURFLUX

• Fitting Position: Rear Axle
• Construction Year from: 09.1986
• Quantity per packing unit: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS1625

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Name: BR S 85 508
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D684-7571
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20669
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 119.3
• Width 2 [mm]: 119
• Height 1 [mm]: 69.5
• Height 2 [mm]: 69.5
• Thickness 1 [mm]: 15.8
• Thickness 2 [mm]: 15.8
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Vehicle Identification Number (VIN) to: ******81*H*299000
• for brake disc thickness [mm]: 20
• for brake disc diameter [mm]: 256
• Length [mm]: 118.9
• Width [mm]: 69.5
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.3
• Observe service information:
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Surface: Smooth
• Material: Metal
• Outer Diameter [mm]: 72
• Inner Diameter [mm]: 10.5
• Width [mm]: 30
• Manufacturer: GATES

• Block Separation:
• Vehicle Identification Number (VIN) to: ******81*H*299000
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Material: Sheet Steel
• Brake Lining: with lining
• Fitting Position: Rear Axle
• Weight [kg]: 1.55
• Manufacturer: FEBI HAMULCE

Braking System: for vehicles with reinforced brakes, for vehicles with brake force regulator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Weight [kg]: 1.58
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Width 1 [mm]: 118.9
• Height 1 [mm]: 69.5
• Thickness 1 [mm]: 19.6
• Brake System: LUCAS/TRW
• Warning Contact Length [mm]: 235
• Wear Warning Contact: with integrated wear sensor
• Weight [kg]: 1.55
• Number of wear indicators [per axle]: 2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 119.3
• Height [mm]: 69.6
• Thickness [mm]: 16
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E1 90R 01024/129
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year from: 09.1986
• Quantity per packing unit: 4
• FMSI Code: D290-7143
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20669, 20901
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: incl. wear warning contact
• Width 1 [mm]: 119
• Width 2 [mm]: 119
• Height 1 [mm]: 69.5
• Height 2 [mm]: 69.5
• Thickness 1 [mm]: 18.9
• Thickness 2 [mm]: 18.9
• Name: DE LP444
• Manufacturer: DELPHI

• Width [mm]: 25
• Number of Teeth: 135
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.3
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 25
• Number of Teeth: 135
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.3
• Observe service information:
• Name: SW 99 02 0063
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Belt Width [mm]: 25
• Colour: black
• Number of Teeth: 135
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF

• Number of Teeth 1: 135
• Width 1 [mm]: 25.4
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530000210

• Fitting Position: Front Axle
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 2
• Brake System: Lucas / TRW
• Test Mark: E9 90R-02A1251/4450
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Width [mm]: 119
• Height [mm]: 70
• Height 1 [mm]: 70
• Thickness [mm]: 16
• WVA Number: 20168
• Test Mark: R90 Homologated
• Wear Warning Contact: not prepared for wear warning indicator
• Weight [kg]: 1.4
• Packing Type: Carton
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID

• Number of Teeth: 135
• Driven Units: Camshaft
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: OPTIMAL ZAWIESZENIE

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Manufacturer: GATES

• Braking System: for vehicles with reinforced brakes
• Piston Diameter [mm]: 19.1
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 2.195
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.