Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 63
- Length 1 [mm]: 44
- Length 2 [mm]: 47
- Material: Rubber
- Fitting Position: Front
- Weight [kg]: 0.075
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount,
engine support, front -
Additional information: Rubber mount,
engine support, front
- for OE number: 211261325B
- Fitting Position: Front
- Weight [g]: 18
- Name: IM 30723
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Diameter [mm]: 63
- Fitting Position: Front
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: 8C-
P- 053 245, 8C- P- 020 000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1986
-
Vehicle Identification Number (VIN) from: 81-
G- 060 581 - Quantity per packing unit: 5
- Diameter [mm]: 46
- Height [mm]: 42
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: both sides,
Front - Manufacturer: KAMOKA
- Thickness [mm]: 46
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 39
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.142
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 811199415A
- Fitting Position: Front
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 159
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 39
- Length [mm]: 46
- Name: IM 30719
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Vehicle Identification Number (VIN) to: ******8C*P*053245,
******8C*P*020000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1986
- Vehicle Identification Number (VIN) from: ******81*G*060581
- Length [mm]: 42
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
-
Material: Rubber/
Metal - Fitting Position: Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.142
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: ******8C*P*053245,
******8C*P*020000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1986
- Vehicle Identification Number (VIN) from: ******81*G*060581
- Length [mm]: 42
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 38.3
-
Material: Rubber/
Metal - Fitting Position: Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.142
- Name: SW 30 75 0004
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: both sides,
Front -
for OE number: 811 199 415 A,
823 199 415 C, 893 199 415 -
Name: PAIGUTUS,
MOOTOR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Right Front
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount,
engine support, front, 4 speed -
Additional information: Rubber mount,
engine support, front, 4 speed
- Transmission Type: Manual Transmission
- Vehicle Equipment: for vehicles without air conditioning
- Fitting Position: Front
- Length [mm]: 86
- Width [mm]: 70
- Height [mm]: 105
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Guarantee: 3 years guarantee
- Weight [kg]: 0.45
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Transmission Type: Manual Transmission
- Vehicle Equipment: for vehicles without air conditioning
- External Thread Size: M10
- Colour: black
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.49
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Automatic Transmission
- Vehicle Equipment: for vehicles without air conditioning
-
Material: Rubber/
Metal - Fitting Position: Left
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.49
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left
- Manufacturer: KAMOKA
-
Fitting Position: both sides,
Left Front, Right Front, Front - Required quantity: 1
- Mounting Type: Hydro Mount
-
Weight [g]: 1,
038 - Colour Coding: green
- Name: IM 30731
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Right Front
- Required quantity: 1
- Mounting Type: Hydro Mount
-
Weight [g]: 1,
212 - Colour Coding: yellow
- Name: IM 30728
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks