Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 4
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 6
-
Supplementary Article/Info 2: without cable,
with plastic socket - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Supplementary Article/Info 2: with plug,
without cable - for OE number: 4D0971993
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Supplementary Article/Info 2: with plug,
with cable - for OE number: 4D0971993
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: Kaabliparanduskomplekt,
ktuserohu andur - Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Thread Size: M 12x1.5
- Number of pins: 2
- Housing Colour: brown
- Manufacturer: FAE
- for OE number: 036 906 051G
- Number of pins: 4
- Pressure from [kPA]: 10
- Pressure to [kPA]: 117
-
Fabrication Number: ECM-
VW- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CNHA
- Fitting Position: Fuel Line
-
Thread Size: M12x1,
5 - Spanner Size: 17
-
Name: ANDUR,
KTUSETEMPERATUUR - Manufacturer: EPS
- Engine Code: CNHA
- Fitting Position: Fuel Line
-
Thread Size: M12x1,
5 - Spanner Size: 17
- Manufacturer: FACET
- Number of pins: 4
- Guarantee: 3 years guarantee
- Pressure from [kPA]: 10
- Pressure to [kPA]: 11
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV144
- Manufacturer: ESEN SKV
-
for OE number: 059 906 051 C,
076 906 051 B - Number of pins: 3
- Connector Shape: D Shape
-
Fabrication Number: ECS-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CNHA
- Colour: black
- Plug Type: Screw Contact
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Vehicle Equipment: for vehicles with start-
stop function - for PR number: 7L8
- Number of pins: 4
- Manufacturer: JPN
- Engine Code: CNHA
- Colour: black
- Plug Type: Screw Contact
- Manufacturer: FACET
- Sensor Type: NTC Sensor
- Number of pins: 2
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Connector Shape: oval
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Star
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 3
- Manufacturer: DELPHI ELEKTRONIKA
- Cable Cross Section [mm²]: 0.75
- Manufacturer Restriction: VAG
- Socket Width [mm]: 2.8
- Number of pins: 3
- Cable Length [mm]: 250
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
- for OE number: 04E 919 501 B
- Length [mm]: 40
- Guarantee: 3 years guarantee
- Number of pins: 2
- Voltage [V]: 12
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Fabrication Number: ECP-
VW- 009 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- for OE number: 03G 906 051 G
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU358380651
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- General Information: Pressure difference sensor
- Manufacturer: VIKA
-
for PR number: TM4,
TD1 - Manufacturer Restriction: VAG
- Number of pins: 3
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Contact surface: Tin-
plated - Socket Width [mm]: 2.8
-
Supplementary Article/Supplementary Info: with socket housing,
with gasket/ seal -
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
andur (ohuvotu rohk) - Manufacturer: HBE
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Number of mounting bores: 1
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 24
- for OE number: 04L 907 601
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV333
- Manufacturer: ESEN SKV
- for PR number: TD1
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MEY
- Engine Code: CNHA
- Name: EP 1.953.774
- Manufacturer: EPS
- Engine Code: CNHA
- Manufacturer: FACET
Manufacturer: MAGNETI MARELLI
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Number of mounting bores: 1
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 24
- Quality: OE EQUIVALENT
- for OE number: 05E907601D
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- for OE number: 076 906 051 B
- Manufacturer: TRUCKTEC
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
-
for PR number: TM4,
TD1 - Number of circuits: 3
- Plug Type: Butt Joint
- Cable Length [mm]: 200
-
Wire cross-section [mm²]: 0,
5 - Manufacturer: METZGER
- General Information: Pressure difference sensor
- Manufacturer: VIKA
-
Thread Size: M12x1,
5 - Number of pins: 2
- Connector Shape: oval
- Colour: black
- Version: IAM
- Article number of recommended accessories: 0899250
- Manufacturer: METZGER
- for PR number: 7MM
- Number of connectors: 3
- Material: Plastic
-
Name: Andur,
heitgaasisurve - Manufacturer: MAX
- General Information: Camshaft position sensor
- Manufacturer: VIKA
- Manufacturer Restriction: VAG
- Plug Type ID: Code A
- Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Cable insulation material: Silicone
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE
- Emission Standard: Euro 5
- Number of connectors: 3
- Material: Plastic
- Sensor Type: Differential Pressure Sensor
- Weight [kg]: 0.02
- for OE number: 059 906 051 C
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 12
- Number of connectors: 3
- Weight [kg]: 0.015
- for OE number: 05E 907 601 D
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 3
- Manufacturer: FAST
-
Thread Size: M18x1,
5 - Number of pins: 3
-
Fabrication Number: EFP-
AU- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fuel Mixture Formation: Direct Injection
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV409
- Manufacturer: ESEN SKV
- Number of pins: 4
- Supplementary Article/Info 2: with integrated air temperature sensor
- Pressure from [kPA]: 10
- Pressure to [kPA]: 117
- for OE number: 03C906051F
- Manufacturer: MEAT & DORIA
- Exhaust System: before soot particulate filter
- Connector Shape: D Shape
- Number of pins: 3
-
Pressure [Pa] from: -
14, 000 -
Pressure [Pa] to: 100,
000 -
Name: Andur,
heitgaasisurve - Manufacturer: NRF
- Overall Length [mm]: 70
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
- Spanner Size: 16
- Sensor Type: NTC Sensor
- Manufacturer: VALEO
Manufacturer: BOSCH
- Number of pins: 3
- Pressure from [kPA]: 50
- Manufacturer: DLP
Name: CZUJNIK CIN. POWIETRZA AUDI A1, A3, A4, A5, A6, Q2, Q3, Q5, TT 2,0 TDI 08-
-
for PR number: 7MG,
7MJ - Alternatively:
- Number of connectors: 3
- Connector Shape: D Shape
- Number of mounting bores: 1
- Alternative Repair Kit: 550813
- Number of circuits: 2
- Manufacturer: ERA
- Number of pins: 3
- Socket colour: yellow
-
Thread Size: M18x1,
5 -
Fabrication Number: EFP-
AU- 003 - Manufacturer: NTY
-
Name: NTY EFP-
AU- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
-
Socket colour: yellow/
brown -
Thread Size: M18x1,
5 -
Fabrication Number: EFP-
VW- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CNHA
- Pressure from [kPA]: 29
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.48
- Name: EP 1.993.327
- Manufacturer: EPS
- Engine Code: CNHA
- Pressure from [kPA]: 29
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.48
- Manufacturer: FACET
- Engine Code: CNHA
- for OE number: 04L 906 051 C
- Number of pins: 3
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Number of circuits: 1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV664
- Engine Code: CNHA
- Fitting Position: before soot particulate filter
- Output Voltage, from [V]: 0.5
- Output Voltage, up to [V]: 4.5
- Manufacturer: FACET
- Mounting Type: Bolted
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of pins: 3
- Sensor Type: Impulse Sensor
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: CNHA
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
- Fitting Position: Suction Pipe
- for OE number: 03N906081A
-
Name: Andur,
sisendohu temperatuur - Manufacturer: MD
- Engine Code: CNHA
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV352
- Number of pins: 3
-
Pressure [Pa] from: 48,
500 -
Pressure [Pa] to: 400,
000 - Manufacturer: FAE
- for PR number: 7MM
- Number of pins: 3
- Colour: black
- Material: Plastic
- Manufacturer: AIC
Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 2
-
Fabrication Number: EGT-
AU- 029 - Cable Length [mm]: 850
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Connector Shape: D Shape
- Number of connectors: 1
- for OE number: 04L906051B
- Manufacturer: MEAT&DORIA
- Number of pins: 4
- Pressure from [kPA]: 10
- Pressure to [kPA]: 115
- Manufacturer: VDO
- Number of pins: 3
- Connector Shape: D Shape
- Number of connectors: 2
- Quality: OE EQUIVALENT
- for OE number: 03L906051B
- Manufacturer: MEAT & DORIA
- General Information: Exhaust pressure sensor
- Manufacturer: VIKA
Manufacturer: NRF KLIMATYZACJA
- Fitting Position: Soot Particulate Filter
- Number of pins: 3
-
Name: ANDUR,
HEITGAASISURVE - Manufacturer: MEY
- Supplementary Article/Info 2: with cable
- Cable Length [mm]: 420
- Overall Length [mm]: 565
- Number of pins: 2
- Connector Shape: oval
- Socket colour: brown
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Name: VA 368876
- Manufacturer: VALEO
- Number of pins: 2
- Fitting Position: before soot particulate filter
- Socket colour: brown
-
Fabrication Number: EGT-
AU- 057 - Cable Length [mm]: 410
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing Type: with housing
- Housing material: Plastic
- Voltage [V]: 12
- Length [mm]: 110
-
Fabrication Number: EPP-
AU- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CNHA
- Number of pins: 3
- Connector Shape: D Shape
- Number of circuits: 1
- Number of mounting bores: 1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: with cable
- Cable Length [mm]: 490
- Overall Length [mm]: 600
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Weight [kg]: 0.1
- Manufacturer: VALEO
- Exhaust System: before soot particulate filter
- Mounting Type: Bolted
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: CZUJNIK CIN. SPALIN VW GOLF 2,
0TDI 14- - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Exhaust System: before soot particulate filter
- Number of pins: 3
- Opening pressure [kPa]: 14
- Name: DE DPS00020
- Manufacturer: DELPHI
- Number of pins: 2
- Supplementary Article/Info 2: with cable
-
Fabrication Number: EGT-
AU- 039 - Cable Length [mm]: 724
Lisainfo: ENG. 2.0TDI AUDI A4 B8 13-15,A5 13-17, A6 C7 13-18, Q5 13-17 /ZA FILTREM CZ¸STEK STAYCH Additional information: ENG. 2.0TDI AUDI A4 B8 13-15,A5 13-17, A6 C7 13-18, Q5 13-17 /ZA FILTREM CZ¸STEK STAYCH
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
- Socket colour: black
-
Fabrication Number: EGT-
AU- 040 - Cable Length [mm]: 900
- Manufacturer: NTY
Lisainfo: ENG. 2.0TDI AUDI A4 B8/9 07-19,A5 13-20,A6 12-18,Q5 17-20 /PRZED TURBOSPRARK¸ Additional information: ENG. 2.0TDI AUDI A4 B8/9 07-19,A5 13-20,A6 12-18,Q5 17-20 /PRZED TURBOSPRARK¸
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Socket colour: black
-
Fabrication Number: EGT-
AU- 054 - Cable Length [mm]: 490
- Manufacturer: NTY
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.24
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV159
- Manufacturer: ESEN SKV
- for OE number: 059906051C
- Manufacturer: MEAT & DORIA
- for PR number: 7MM
- Number of connectors: 3
- Material: Plastic
- Sensor Type: Differential Pressure Sensor
- Weight [kg]: 0.03
- for OE number: 03L 906 051 D
-
Name: ANDUR,
HEITGAASISURVE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- for PR number: TD1
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 24
- Number of pins: 3
- Version: IAM
- Manufacturer: METZGER
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
-
Thread Size: M18 x 1,
5 - Spanner Size: 27
- Number of pins: 3
-
Name: Andur,
ktuserohk - Manufacturer: MEY
- Alternatively:
- Number of pins: 3
- Opening pressure [kPa]: 13.7
- Manufacturer: DELPHI
- Name: DE DPS00001
- Number of pins: 3
- Connector Shape: D Shape
- Number of connectors: 2
- for OE number: 03L906051D
- Manufacturer: MEAT&DORIA
- for OE number: 03L 906 461 A
- Manufacturer: KAMOKA
- Engine Code: CNHA
- for manufacturer exhaust gas norm: Euro 6 plus
- Sensor Type: Differential Pressure Sensor
- Output Voltage, up to [V]: 5
-
Measuring Range from [kPa]: -
14 - Measuring Range to [kPa]: 100
- Number of pins: 3
- Number of mounting bores: 1
- Supplementary Article/Supplementary Info: without accessories
- Fitting Position: Soot Particulate Filter
- Manufacturer: PIERBURG
- for PR number: 7MM
- Number of connectors: 3
- Material: Plastic
- Sensor Type: Differential Pressure Sensor
- Weight [kg]: 0.03
- for OE number: 03L 906 051 D
- Name: SW 30 10 0853
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 04L 907 601
- Width [mm]: 67
- Height [mm]: 68
- Length [mm]: 40
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Fitting Position: before catalytic converter
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 25
- Cable Length [mm]: 504
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF
- Required quantity: 2
- Guarantee: 5 years guarantee
- Manufacturer: HUCO
Exhaust System: for vehicles with factory fitted soot -/particulate filter
- Engine Code: CNHA
- Number of pins: 3
- Connector Shape: D Shape
- Number of connectors: 1
- for OE number: 04L906051C
-
Name: Andur,
heitgaasisurve - Manufacturer: MD
- Required quantity: 2
-
General Information: Sold in Hitachi brand:
printing and packaging - Name: HI 2507407
- Manufacturer: HITACHI
Exhaust System: for vehicles with factory fitted soot -/particulate filter
- Required quantity: 1
- Fitting Position: after soot particulate filter
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 25
- Cable Length [mm]: 724
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF
- Guarantee: 3 years guarantee
- Weight [kg]: 0.09
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Required quantity: 1
- Fitting Position: before exhaust turbocharger
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 25
- Cable Length [mm]: 843
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: NRF
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: VAL
- Construction Year from: 03.2014
- Voltage [V]: 12
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Engine Code: CNHA
- for OE number: 4G0 906 088 R
- Cable Length [mm]: 410
- Number of pins: 2
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Exhaust System: before soot particulate filter
- Socket colour: brown
- Weight [kg]: 0.08
- Shape: straight
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 30SKV407
- Fitting Position: after soot particulate filter
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 2
- Cable Length [mm]: 724
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT358226341
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Name: Andur,
heitgaasisurve - Manufacturer: BOS
-
Pressure hose connector diameter [mm]: 5,
6.5 - Length [m]: 1
- Material: Silicone
- Chemical Properties: Oil resistant
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +350
-
Clamping Range from [mm]: 10,
11, 11.5, 12.5 -
Clamping Range to [mm]: 12.5,
13.5, 14, 15 - SVHC: No SVHC present!
- Manufacturer: HBE
Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)
- for PR number: 7MM
- Fitting Position: before exhaust turbocharger
-
Thread Size: M14x1,
5 - Cable Length [mm]: 896
- Socket colour: black
- Manufacturer: FAE
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: MAG
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 660
-
Name: DE ES21065-
12B1 - Manufacturer: DELPHI
-
External Thread Size: M18 x 1,
5 - Number of connectors: 3
- Weight [kg]: 0.06
- for OE number: 04L 906 054
-
Name: ANDUR,
KTUSEROHK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CNHA
- Housing Type: with housing
- Length [mm]: 110
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 80
- Name: EP 1.991.446
- Manufacturer: EPS
- General Information: Exhaust temperature sensor
- Manufacturer: VIKA
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Cable Length [mm]: 700
- Manufacturer: FAE
- for OE number: 04L 906 054
- Length [mm]: 75
- Guarantee: 3 years guarantee
- Number of pins: 3
- Voltage [V]: 12
-
Thread Size: M18x1,
5 - Fitting Position: Fuel Rail
- Socket colour: black
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- for PR number: E0A
-
for combined PR number: 7L1,
7L7, FM0 - Number of mounting bores: 3
- Number of pins: 6
- Transmission Type: Manual Transmission
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Vehicle Equipment: for vehicles without drive-select, for vehicles with start-stop function Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
External Thread Size: M14 x 1,
5 - Number of connectors: 2
- Fitting Position: before catalytic converter
- Cable Length [mm]: 504
- Weight [kg]: 0.058
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 7MM
- Fitting Position: before exhaust turbocharger
- Guarantee: 5 years guarantee
- Cable Length [mm]: 845
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Name: HU 137075
- Number of pins: 3
- Connector Shape: D Shape
-
Thread Size: M18 x 1,
5 - Fuel Mixture Formation: Direct Injection
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
-
Thread Size: M18x1,
5 - Version: OE
- Manufacturer: METZGER
- Fitting Position: after soot particulate filter
- Emission Standard: Euro 6+
- Number of pins: 2
- Cable Length [mm]: 770
- Sensor Type: PTC
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: MEY
- Housing Type: with housing
- Manufacturer: VDO
- Fitting Position: before catalytic converter
- Guarantee: 5 years guarantee
- Cable Length [mm]: 500
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Fitting Position: before soot particulate filter
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 35
- Cable Length [mm]: 414
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF
- Fitting Position: before catalytic converter
- for PR number: 7MM
- Number of pins: 2
- Cable Length [mm]: 550
- Sensor Type: PTC
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: MEY
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
- Fitting Position: before soot particulate filter
- for PR number: 7MM
- Guarantee: 5 years guarantee
- Cable Length [mm]: 410
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
-
Resistor Type: Hot-
wire Sensor - Number of connectors: 4
- Weight [kg]: 0.18
- Housing Type: with housing
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: before soot particulate filter
-
External Thread Size: M14 x 1,
5 - Number of connectors: 2
- Cable Length [mm]: 414
- Weight [kg]: 0.048
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: CNHA
- Fitting Position: before catalytic converter
- Colour: black
- Cable Length [mm]: 650
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.413
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
- Housing Type: with housing
-
Housing material: Plastic,
PBT, GRP (Glass fibre Reinforced Plastic) - Number of pins: 4
- Connector Shape: rectangular
- Fitting Position: Air Filter Housing
- Number of mounting bores: 2
-
Supplementary Article/Info 2: without seal ring,
with integrated grille - Recommended additional repairs: Air Filter
- Article number of recommended accessories: 113 883
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CNHA
- Fitting Position: before catalytic converter
- Colour: black
- Cable Length [mm]: 650
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased
- Oxygen Sensor: Heated
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 6
- Cable Length [mm]: 805
- Weight [kg]: 0.121
- Name: SW 33 10 4126
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CNHA
- Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: PIERBURG
-
Oxygen Sensor: Regulating Sensor,
Broadband Oxygen Sensor, Heated - Emission Standard: Euro 5
-
Exhaust System: for pre-
catalytic converter - Cable Length [mm]: 720
- Manufacturer: DELPHI
- Quality: OE EQUIVALENT
- for OE number: 0281002956
- Manufacturer: MEAT&DORIA
- Fitting Position: before catalytic converter
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: BOS
- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 843
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: BOS
- Housing Type: with housing
- Number of pins: 4
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10397-
12B1
- Oxygen Sensor: Heated
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 6
- Cable Length [mm]: 805
- Weight [kg]: 0.121
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CNHA
- Construction Year from: 03.2014
- Number of pins: 2
- Fitting Position: before exhaust turbocharger
- Manufacturer: VDO
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Manufacturer: SKV GERMANY
- Name: CE 09SKV915
-
Mounting Type: Pipe-
neck - Number of pins: 4
- Suction pipe connector diameter [mm]: 80
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 8ET009149441
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: before soot particulate filter
- Number of pins: 2
- Cable Length [mm]: 460
- Sensor Type: PTC
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: MEY
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 660
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Manufacturer: BREMI
- Fitting Position: after soot particulate filter
- Cable Length [mm]: 740
- Number of pins: 2
-
Alternative Repair Kit: 0894503,
0894525 - Manufacturer: METZGER
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 735
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Weight [kg]: 0.19
- Manufacturer: VALEO
- Name: VA 368403
Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
- Number of pins: 5
- Oxygen Sensor: Broadband Oxygen Sensor
- Cable Length [mm]: 520
- Overall Length [mm]: 670
- for OE number: 03L906262Q
- Manufacturer: MEAT&DORIA
- Shape: Square
- Number of mounting bores: 2
- Supplementary Article/Info 2: with cable
- Connector Shape: oval
- Number of pins: 5
- Socket colour: black
-
Cable Length [mm]: 1,
170 - for OE number: 03L907807AF
-
Name: NOx-
sensor, NOx- katalsaator - Manufacturer: MD
- Shape: Square
- Number of mounting bores: 2
- Supplementary Article/Info 2: with cable
- Connector Shape: oval
- Socket colour: black
- Number of pins: 5
-
Cable Length [mm]: 1,
123 - for OE number: 8K0907807T
-
Name: NOx-
sensor, NOx- katalsaator - Manufacturer: MD
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks