Lisainfo: (AM) Mehaaniline pump vana andur ei sobi

• for OE number: 4F0973702
• Supplementary Article/Info 2: with plug
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4F0973702
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Lisainfo: ABA120-00-243
• Additional information: ABA120-00-243

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: BGA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• Seal Material: Rubber
• Manufacturer: KAMOKA

• Operating Mode: Mechanical
• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Overall Height [mm]: 98
• Diameter [mm]: 54
• Manufacturer: ASHIKA

• Overall Height [mm]: 98
• Diameter [mm]: 54
• Manufacturer: JAPKO

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: JPN

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• Operating Mode: Mechanical
• Manufacturer: DOLZ
• Name: DO A255

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Supplementary Article/Supplementary Info: without solenoid valve, with gasket/seal
• Supplementary Article/Info 2: non-switchable water pump
• Number of blades/vanes: 7
• Pulleys: without belt pulley
• Weight [kg]: 0.725
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• for OE number: 8K0 965 561
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-022

Lisainfo: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08- Additional information: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08-

• Fabrication Number: EZC-VW-438
• Name: NTY EZC-VW-438
• Manufacturer: NTY

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with water pump gasket
• Technical Information: SKF Aquamax
• Name: SK VKPC81178
• Manufacturer: SKF

Supplementary Article/Info 2: without integrated disabling contact, non-switchable water pump

• Voltage [V]: 12
• for OE number: 5Q0965561B
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Version: Not Switchable
• Supplementary Article/Supplementary Info: do not use sealant
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 54.5
• Impeller Diameter [mm]: 70.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: GRAF

Supplementary Article/Info 2: without integrated disabling contact, with seal ring, non-switchable water pump

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Supplementary Article/Supplementary Info: without solenoid valve, with gasket/seal
• Supplementary Article/Info 2: non-switchable water pump
• Number of blades/vanes: 7
• Pulleys: without belt pulley
• Weight [kg]: 0.725
• Observe service information:
• Name: SW 30 10 3078
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Version: Not Switchable
• Supplementary Article/Supplementary Info: do not use sealant
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 54.5
• Impeller Diameter [mm]: 70.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: GRAF
• Lisainfo: PA1360A-8
• Additional information: PA1360A-8

Supplementary Article/Info 2: with seal ring, with integrated disabling contact, non-switchable water pump

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 22
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer Restriction: PIERBURG
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 04L 121 011 EX
• Supplementary Article/Supplementary Info: without integrated regulator
• Supplementary Article/Info 2: without integrated disabling contact
• Operating Mode: Mechanical
• Manufacturer: TRUCKTEC

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.68

• Vehicle configuration line / variant: TB
• for OE number: 04L121011N
• Weight [kg]: 1.1
• Supplementary Article/Info 2: non-switchable water pump
• Manufacturer: DAYCO POMPY WODY

• Construction Year from: 04.2014
• Engine Code: CNHA
• for OE number: 04L 121 011
• Manufacturer: FAI

Supplementary Article/Info 2: without integrated disabling contact, without sensor

• Supplementary Article/Info 2: without integrated disabling contact
• Version: SWITCHABLE
• Weight [kg]: 0.91
• Operating Mode: Electric-hydraulic
• Specification: AIRTEX SW PATENTED
• Name: AI 1978
• Manufacturer: AIRTEX

• Number of Teeth: 145
• Width [mm]: 25
• Weight [kg]: 2.05
• for OE number: 04L109243B
• for article number: A255
• Manufacturer: DOLZ
• Name: DO KD153

• Engine Code: CNHA
• Vehicle Identification Number (VIN) from: 8K-8-000001
• Manufacturer: MAGNETI MARELLI

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 3
• Number of Teeth: 145
• Name: SN KDP457.790
• Manufacturer: NTN-SNR

• Water Pump Type: for timing belt drive
• Number of bolts/screws: 3
• Water pump impeller material: Plastic
• Colour: blue, black
• Supplementary Article/Supplementary Info: with gaskets/seals
• Technical Information: SKF Aquamax
• Name: SK VKPC81278
• Manufacturer: SKF

Supplementary Article/Info 2: with integrated disabling contact, switchable water pump

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Supplementary Article/Info 2: switchable water pump
• Number of blades/vanes: 7
• Weight [kg]: 0.85
• Observe service information:
• Name: SW 33 11 0349
• Manufacturer: SWAG

Supplementary Article/Supplementary Info: with solenoid valve, with gasket/seal, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Operating Mode: Electric
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538073310

• New Part:
• Supplementary Article/Info 2: switchable water pump
• Manufacturer: DOLZ
• Name: DO A255V
• Additional information: A-255V DOLZ
• Lisainfo: A-255V DOLZ

• Width [mm]: 25
• Water pump impeller material: Metal
• Number of Teeth: 145
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: non-switchable water pump
• Belts: with rounded tooth profile
• Weight [kg]: 2.021
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -CNHA # CN
• Number of Teeth: 145
• Width [mm]: 25
• Length [mm]: 1,381
• Full Set:
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.3
• Supplementary Article/Info 2: non-switchable water pump
• Name: DA KTBWP8840
• Manufacturer: DAYCO

• Weight [kg]: 0.88
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Operating Mode: Electric
• Manufacturer: CONTITECH

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact

• Vehicle configuration line / variant: TB
• for OE number: 04L121011P
• Weight [kg]: 1.3
• Supplementary Article/Info 2: switchable water pump
• Name: DA DP1981
• Manufacturer: DAYCO

• Name: DRM 02861
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Construction Year to: 12.2015
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT5170, GAT5247, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES
• Lisainfo: KP15678XS GAT
• Additional information: KP15678XS GAT

• Engine Code: CNHA
• Operating Mode: Electric-hydraulic
• Water pump impeller material: Plastic
• Impeller Diameter [mm]: 70.3
• Number of blades/vanes: 7
• Belt Pulley Ø [mm]: 54.2
• Supplementary Article/Info 2: with seal ring, switchable water pump
• Manufacturer: PIERBURG

• Water Pump Type: for timing belt drive
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 145
• Manufacturer: SKF POLSKA

Supplementary Article/Info 2: with studs, without integrated disabling contact, non-switchable water pump

• Fabrication Number: CPZ-AU-030
• Operating Mode: Electric
• Name: NTY CPZ-AU-030
• Manufacturer: NTY

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with integrated regulator, with gasket/seal
• Manufacturer: HEPU

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact, with bolts/screws

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• reinforced version:
• Belt Pulley Ø [mm]: 54
• Manufacturer: VALEO

• Width 1 [mm]: 25
• Number of Teeth: 145
• Number of track rollers: 3
• Number of belts: 1
• Manufacturer: SNR
• Name: SN KDP457.790S

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -KTBWP
• Number of Teeth: 145
• Width [mm]: 25
• Length [mm]: 1,381
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.6
• Supplementary Article/Info 2: switchable water pump
• Name: DA KTBWP8841
• Manufacturer: DAYCO

• Driven Units: Water Pump, Camshaft
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 145
• Pulleys contained: 3
• Manufacturer: HEPU

Supplementary Article/Info 2: non-switchable water pump, without integrated disabling contact, with bolts/screws

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Number of Teeth 1: 145
• Width 1 [mm]: 25
• Supplementary Article/Info 2: switchable water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530065030
• Lisainfo: 530065030
• Additional information: 530065030

• General Information: Water pump; electrically flow control
• Manufacturer: BORSEHUNG

• Water Pump Type: for timing belt drive
• Number of bolts/screws: 4
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Colour: blue, black
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 145
• Name: SK VKMC01278
• Manufacturer: SKF

Supplementary Article/Info 2: with studs, with integrated disabling contact, switchable water pump

• Width [mm]: 25
• Water pump impeller material: Metal
• Number of Teeth: 145
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.022
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 1,381
• Number of Teeth: 145
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 3
• Manufacturer: BOSCH
• Name: BS 1987946383

• Number of Teeth: 145
• Width [mm]: 25
• Weight [kg]: 2.12
• for OE number: 04L109243B
• for article number: A255V
• Manufacturer: DOLZ
• Name: DO KD153V

• Name: SN WPE006
• Manufacturer: SNR

• Vehicle configuration line / variant: MAIN
• for OE number: 4H0965569A
• Operating Mode: Electric
• Name: DA DEP1032
• Manufacturer: DAYCO

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 145
• Weight [kg]: 2.144
• Width 1 [mm]: 25
• Name: CT 1168WP1
• Manufacturer: CONTITECH

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact

• Water pump impeller material: Plastic
• Number of Teeth: 145
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: switchable water pump
• Belts: with rounded tooth profile
• Weight [kg]: 1.979
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2015
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT5170, GAT5247, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

Supplementary Article/Info 2: with integrated disabling contact, switchable water pump

• Driven Units: Camshaft, Oil Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Weight [kg]: 2.173
• Width 1 [mm]: 25
• Width 2 [mm]: 10.2
• 2 Belts:
• Number of Teeth 2: 50
• Number of Teeth 1: 145
• Engine Timing: Timing belt in the oil bath
• Manufacturer: CONTITECH
• Additional information: CT1168WP8PRO
• Lisainfo: CT1168WP8PRO

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Width of castor bearing surface [mm]: 26
• Water pump impeller material: Plastic
• Number of Teeth: 145
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: switchable water pump
• Belts: with rounded tooth profile
• Weight [kg]: 1.899
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• for OE number: 04L 198 119 K S2
• Name: SW 33 11 0491
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 145
• Pulleys contained: 3
• Manufacturer: HEPU

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact, with bolts/screws

• Driven Units: Camshaft, Water Pump, Oil Pump
• Number of belts: 2
• Width 1 [mm]: 25
• Number of Teeth 1: 145
• Width 2 [mm]: 10
• Number of Teeth 2: 53
• Pulleys contained: 3
• Alternatively:
• Manufacturer: HEPU

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact, with bolts/screws

• for OE number: 8K0965561A
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts