Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Outer Diameter [mm]: 32
- Height [mm]: 8.5
-
Name: Sulgurkate,
nukkvoll - Manufacturer: ELR
- Fitting Position: frontal sided
- Engine Code: CJCD
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085C
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Name: FAI OS1663
- Additional information: OS1663 FAI
- Lisainfo: OS1663 FAI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Width [mm]: 10
- Outer Diameter [mm]: 47
- for OE number: 03L103085C
-
Name: Volli rongastihend,
Nukkvoll - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
-
Vehicle Identification Number (VIN) to: 8K-
F- 250000, FL- F- 250000 - for OE number: 03L 109 096
- Gasket Design: Steel
-
Fitting Position: transmission sided,
Cylinder Head - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CSUA
- Fitting Position: transmission sided
- for OE number: 03L109096B
-
Name: Tihend,
nukkvolliseadistaja - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
- Engine Code: CJCD
- Fitting Position: Front
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
-
Engine Code: CJCD,
CSUA - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Additional information: 897.690 ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Fitting Position: frontal sided,
Cylinder Head - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CSUA
-
Fitting Position: Cylinder Head,
transmission side - for OE number: 03L 109 096 B
-
Name: Tihend,
nukkvolliseadistaja - Manufacturer: ELR
- Engine Code: CSUA
- Fitting Position: transmission sided
- for OE number: 03L109096
-
Name: Tihend,
nukkvolliseadistaja - Manufacturer: DRM
- Engine Code: CSUA
-
Fitting Position: Cylinder Head,
transmission side - for OE number: 03L 109 096
-
Name: Tihend,
nukkvolliseadistaja - Manufacturer: ELR
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.02
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Timing: Timing Belt
- Fitting Position: Exhaust Side
- Number of Teeth: 44
- Outer Diameter [mm]: 132
- Height [mm]: 27.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CJCD
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: CJCD,
CSUA - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: Cylinder Head
- Weight [kg]: 0.64
-
for OE number: 06H103144J,
06H103144K -
for article number: 120-
09- 056 - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Engine Code: CJCD,
CSUA - Block Separation:
- Fitting Position: Intake Side
- Guarantee: 3 years guarantee
- Weight [kg]: 2.1
- Always compare old and new part (in particular OE No.):
- Name: CE 80SKV031
- Manufacturer: ESEN SKV
- Fitting Position: Exhaust Side
- Guarantee: 3 years guarantee
- Weight [kg]: 2.4
- Always compare old and new part (in particular OE No.):
- Name: CE 80SKV010
- Manufacturer: ESEN SKV
- Fitting Position: Intake Side
- Length [mm]: 389.9
- Supplementary Article/Info 2: with gear
- Number of teeth camshaft gear/sprocket: 42
- Bearing Type: Slide Bearing
- Observe the vehicle manufacturer specifications:
- paired article number: 120 782
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Intake Side
- Manufacturer: BGA
- Fitting Position: Intake Side
- Engine Code: CJCD
- Length [mm]: 339.9
- Name: Nukkvoll
- Manufacturer: MVE
- Fitting Position: Exhaust Side
- Engine Code: CJCD
- Length [mm]: 449.7
- Name: Nukkvoll
- Manufacturer: MVE
-
Engine Code: CJCD,
CSUA - Block Separation:
- Fitting Position: Intake Side
- Length [mm]: 390
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
-
Engine Code: CJCD,
CSUA - Block Separation:
- Fitting Position: Exhaust Side
- Length [mm]: 450
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
- Engine Code: CSUA
-
Fitting Position: Exhaust Side,
Intake Side - Operating Mode: Hydraulic
-
Name: ZAWàR ZMIENNYCH FAZ ROZRZ¤DU VW GOLF 12-
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CJCD
- Fitting Position: Exhaust Side
- Supplementary Article/Info 3: for cast shaft
- Name: Nukkvoll
- Manufacturer: KS
- Engine Code: CJCD
-
Additionally required articles (article numbers): BFS174S,
R190S - Material: Steel
- for OE number: 03L109022D
- Valve Type: for exhaust valves
- Name: FAI C348
- Manufacturer: FAI
- Engine Code: CJCD
-
Additionally required articles (article numbers): BFS174S,
R190S - Material: Steel
- for OE number: 03L109021D
- Valve Type: for inlet valves
- Name: FAI C347
- Manufacturer: FAI
- Engine Code: CJCD
- Fitting Position: Exhaust Side
- Material: Steel
- Manufacturer: FEDERAL MOGUL
- Fitting Position: Exhaust Side
- Manufacturer: BGA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks